C
- cfgadm
- cfgadm -al -o show_SCSI_LUN
How to Ensure LUN Level Information is Visible
- cfgadm -c unconfigureHow to Unconfigure a Multipathed FC Device
- cfgadm configureHow to Detect Visible Fabric Devices on a System
- configuration
- fabric devicesConfiguring Device Nodes Without Multipathing Enabled
- multipathingMultipathing Considerations
- SAS devicesConfiguring SAS Boot Devices
- fabric devices
- configure
- automatic failbackConfiguring Automatic Failback
- fabric-connected devicesConfiguring Fabric-Connected Devices
- FC devicesConfiguring Fabric-Connected Devices
- multipathing feature
- NPIV portsConfiguring Virtual Fibre Channel Ports
- SAS devicesConfiguring SAS Boot Devices
- third-party devices
- virtual Fibre Channel portsConfiguring Virtual Fibre Channel Ports
- automatic failback
- configuring
- unidirectional or bidirectional CHAP authentication for iSCSI (how to)How to Configure CHAP Authentication for Your iSCSI
Initiator
- unidirectional or bidirectional CHAP authentication for iSCSI (how to)
- considerations
- device name changesMultipathing Considerations
- device specificMultipathing Considerations
- fabric boot devicesFabric Boot Device Considerations
- multipathingMultipathing Considerations
- per-port configurationPort Configuration Considerations
- SAN devicesFC Device Considerations
- SAS devicesSAS Multipathing Considerations
- stmsboot commandConfiguring FC Devices With Multipathing Considerations
- StorageTek Traffic ManagerConfiguring FC Devices With Multipathing Considerations
- third-party device configurationThird-Party Device Configuration Considerations
- device name changes