ibaddr (1m)

Name

Synopsis

ibaddr   [-d(ebug)]   [-D(irect)]   [-G(uid)]  [-l(id_show)]
[-g(id_show)] [-C ca_name] [-P  ca_port]  [-t(imeout)  time-
out_ms] [-V(ersion)] [-h(elp)] [<lid | dr_path | guid>]

Description

OpenIB Diagnostics                                     IBADDR(1m)



NAME
     ibaddr - query InfiniBand address(es)


SYNOPSIS
     ibaddr   [-d(ebug)]   [-D(irect)]   [-G(uid)]  [-l(id_show)]
     [-g(id_show)] [-C ca_name] [-P  ca_port]  [-t(imeout)  time-
     out_ms] [-V(ersion)] [-h(elp)] [<lid | dr_path | guid>]


DESCRIPTION
     Display  the  lid  (and range) as well as the GID address of
     the port specified (by DR path, lid, or GUID) or  the  local
     port by default.

     Note: this utility can be used as simple address resolver.


OPTIONS
     -G, --Guid
          show lid range and gid for GUID address

     -l, --lid_show
          show lid range only

     -L, --Lid_show
          show lid range (in decimal) only

     -g, --gid_show
          show gid address only


COMMON OPTIONS
     Most OpenIB diagnostics take the following common flags. The
     exact list of supported flags per utility can  be  found  in
     the  usage  message  and can be shown using the util_name -h
     syntax.

     # Debugging flags

     -d      raise the IB debugging level.
             May be used several times (-ddd or -d -d -d).

     -e      show send and receive errors (timeouts and others)

     -h      show the usage message

     -v      increase the application verbosity level.
             May be used several times (-vv or -v -v -v)

     -V      show the version info.




OpenIB              Last change: June 18, 2007                  1






OpenIB Diagnostics                                     IBADDR(1m)



     # Addressing flags

     -D      use directed path address arguments. The path
             is a comma separated list of out ports.
             Examples:
             "0"             # self port
             "0,1,2,1,4"     # out via port 1, then 2, ...

     -G      use GUID address argument. In most cases, it is  the
     Port GUID.
             Example:
             "0x08f1040023"

     -s  <smlid>       use  'smlid'  as  the target lid for SM/SA
     queries.

     # Other common flags:

     -C <ca_name>    use the specified ca_name.

     -P <ca_port>    use the specified ca_port.

     -t  <timeout_ms>  override  the  default  timeout  for   the
     solicited mads.

     Multiple CA/Multiple Port Support

     When  no  IB device or port is specified, the port to use is
     selected by the following criteria:

     1. the first port that is ACTIVE.

     2. if not found, the first port that is  UP  (physical  link
     up).

     If  a  port and/or CA name is specified, the user request is
     attempted to be fulfilled, and will fail if it is not possi-
     ble.


EXAMPLES
     ibaddr                  # local port's address

     ibaddr 32               # show lid range and gid of lid 32

     ibaddr -G 0x8f1040023   # same but using guid address

     ibaddr -l 32            # show lid range only

     ibaddr -L 32            # show decimal lid range only





OpenIB              Last change: June 18, 2007                  2






OpenIB Diagnostics                                     IBADDR(1m)



     ibaddr -g 32            # show gid address only



ATTRIBUTES
     See   attributes(5)   for   descriptions  of  the  following
     attributes:

     +---------------+----------------------+
     |ATTRIBUTE TYPE |   ATTRIBUTE VALUE    |
     +---------------+----------------------+
     |Availability   | network/open-fabrics |
     +---------------+----------------------+
     |Stability      | Volatile             |
     +---------------+----------------------+
SEE ALSO
     ibroute(1m), ibtracert(1m)


AUTHOR
     Hal Rosenstock
          <[email protected]>



NOTES
     This  software  was   built   from   source   available   at
     https://java.net/projects/solaris-userland.    The  original
     community source was downloaded from   ['http://www.openfab-
     rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
     'http://www.openfabrics.org/downloads/libibverbs/libib-
     verbs-1.1.4-1.22.g7257cd3.tar.gz',      'http://www.openfab-
     rics.org/down-
     loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
     'http://www.openfabrics.org/downloads/libsdp/lib-
     sdp-1.1.108-0.15.gd7fdb72.tar.gz',      'http://www.openfab-
     rics.org/downloads/management/infiniband-
     diags-1.5.8.tar.gz',       'http://www.openfabrics.org/down-
     loads/management/libibmad-1.3.7.tar.gz',   'http://www.open-
     fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
     'http://www.openfabrics.org/downloads/manage-
     ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
     loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
     'http://www.openfabrics.org/down-
     loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
     'http://www.openfabrics.org/downloads/rdmacm/librd-
     macm-1.0.14.1.tar.gz',     'http://www.openfabrics.org/down-
     loads/rds-tools/rds-tools-2.0.4.tar.gz']

     Further  information about this software can be found on the
     open  source  community   website   at   http://www.openfab-
     rics.org/.



OpenIB              Last change: June 18, 2007                  3