ibsysstat
(1m)
Name
ibsysstat - system status on an InfiniBand address
Synopsis
ibsysstat [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)]
[-C ca_name] [-P ca_port] [-s smlid] [-t(imeout) timeout_ms]
[-V(ersion)] [-o oui] [-S(erver)] [-h(elp)] <dest lid |
guid> [<op>]
Description
OpenIB Diagnostics IBSYSSTAT(1m)
NAME
ibsysstat - system status on an InfiniBand address
SYNOPSIS
ibsysstat [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)]
[-C ca_name] [-P ca_port] [-s smlid] [-t(imeout) timeout_ms]
[-V(ersion)] [-o oui] [-S(erver)] [-h(elp)] <dest lid |
guid> [<op>]
DESCRIPTION
ibsysstat uses vendor mads to validate connectivity between
IB nodes and obtain other information about the IB node.
ibsysstat is run as client/server. Default is to run as
client.
OPTIONS
Current supported operations:
ping - verify connectivity to server (default)
host - obtain host information from server
cpu - obtain cpu information from server
-o, --oui
use specified OUI number to multiplex vendor mads
-S, --Server
start in server mode (do not return)
COMMON OPTIONS
Most OpenIB diagnostics take the following common flags. The
exact list of supported flags per utility can be found in
the usage message and can be shown using the util_name -h
syntax.
# Debugging flags
-d raise the IB debugging level.
May be used several times (-ddd or -d -d -d).
-e show send and receive errors (timeouts and others)
-h show the usage message
-v increase the application verbosity level.
May be used several times (-vv or -v -v -v)
-V show the version info.
OpenIB Last change: August 11, 2006 1
OpenIB Diagnostics IBSYSSTAT(1m)
# Addressing flags
-G use GUID address argument. In most cases, it is the
Port GUID.
Example:
"0x08f1040023"
-s <smlid> use 'smlid' as the target lid for SM/SA
queries.
# Other common flags:
-C <ca_name> use the specified ca_name.
-P <ca_port> use the specified ca_port.
-t <timeout_ms> override the default timeout for the
solicited mads.
Multiple CA/Multiple Port Support
When no IB device or port is specified, the port to use is
selected by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link
up).
If a port and/or CA name is specified, the user request is
attempted to be fulfilled, and will fail if it is not possi-
ble.
AUTHOR
Hal Rosenstock
<[email protected]>
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+----------------------+
|Availability | network/open-fabrics |
+---------------+----------------------+
|Stability | Volatile |
+---------------+----------------------+
OpenIB Last change: August 11, 2006 2
OpenIB Diagnostics IBSYSSTAT(1m)
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from ['http://www.openfab-
rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
'http://www.openfabrics.org/downloads/libibverbs/libib-
verbs-1.1.4-1.22.g7257cd3.tar.gz', 'http://www.openfab-
rics.org/down-
loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
'http://www.openfabrics.org/downloads/libsdp/lib-
sdp-1.1.108-0.15.gd7fdb72.tar.gz', 'http://www.openfab-
rics.org/downloads/management/infiniband-
diags-1.5.8.tar.gz', 'http://www.openfabrics.org/down-
loads/management/libibmad-1.3.7.tar.gz', 'http://www.open-
fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
'http://www.openfabrics.org/downloads/manage-
ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
'http://www.openfabrics.org/down-
loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
'http://www.openfabrics.org/downloads/rdmacm/librd-
macm-1.0.14.1.tar.gz', 'http://www.openfabrics.org/down-
loads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the
open source community website at http://www.openfab-
rics.org/.
OpenIB Last change: August 11, 2006 3