ibprintswitch (1m)

Name

ibprintswitch - print either the switch specified or a list of switches from the ibnetdiscover output

Synopsis

ibprintswitch.pl  [-R  -l   -C   <ca_name>   -P   <ca_port>]
[<switch_guid|switch_name>]

Description

OpenIB Diagnostics                              IBPRINTSWITCH(1m)



NAME
     ibprintswitch.pl  -  print  either the switch specified or a
     list of switches from the ibnetdiscover output


SYNOPSIS
     ibprintswitch.pl  [-R  -l   -C   <ca_name>   -P   <ca_port>]
     [<switch_guid|switch_name>]


DESCRIPTION
     Faster  than  greping/viewing  with  an editor the output of
     ibnetdiscover, ibprintswitch.pl will  parse  out  and  print
     either  the switch information for the switch specified or a
     list of all the switches found in the subnet.  In  addition,
     it  will  crudely  parse on the node description information
     and if found report all the information for an entire chasis
     if the description information is consistent.

     Finally,  ibprintswitch.pl will also reuse the cached ibnet-
     discover output from some of  the  other  diag  tools  which
     makes  it  a  bit  faster  than  running  ibnetdiscover from
     scratch.


OPTIONS
     -l   List the switches (simply a wrapper for ibswitches).

     -R   Recalculate the ibnetdiscover information,  ie  do  not
          use  the cached information.  This option is slower but
          should be used if the diag tools have not been used for
          some time or if there are other reasons to believe that
          the fabric has changed.

     -C <ca_name>    use the specified ca_name for the search.

     -P <ca_port>    use the specified ca_port for the search.



AUTHORS
     Ira Weiny
          <[email protected]>

     Hal Rosenstock
          <[email protected]>



ATTRIBUTES
     See  attributes(5)  for  descriptions   of   the   following
     attributes:



OpenIB              Last change: May 31, 2007                   1






OpenIB Diagnostics                              IBPRINTSWITCH(1m)



     +---------------+----------------------+
     |ATTRIBUTE TYPE |   ATTRIBUTE VALUE    |
     +---------------+----------------------+
     |Availability   | network/open-fabrics |
     +---------------+----------------------+
     |Stability      | Volatile             |
     +---------------+----------------------+
NOTES
     This   software   was   built   from   source  available  at
     https://java.net/projects/solaris-userland.   The   original
     community  source was downloaded from  ['http://www.openfab-
     rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
     'http://www.openfabrics.org/downloads/libibverbs/libib-
     verbs-1.1.4-1.22.g7257cd3.tar.gz',      'http://www.openfab-
     rics.org/down-
     loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
     'http://www.openfabrics.org/downloads/libsdp/lib-
     sdp-1.1.108-0.15.gd7fdb72.tar.gz',      'http://www.openfab-
     rics.org/downloads/management/infiniband-
     diags-1.5.8.tar.gz',       'http://www.openfabrics.org/down-
     loads/management/libibmad-1.3.7.tar.gz',   'http://www.open-
     fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
     'http://www.openfabrics.org/downloads/manage-
     ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
     loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
     'http://www.openfabrics.org/down-
     loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
     'http://www.openfabrics.org/downloads/rdmacm/librd-
     macm-1.0.14.1.tar.gz',     'http://www.openfabrics.org/down-
     loads/rds-tools/rds-tools-2.0.4.tar.gz']

     Further information about this software can be found on  the
     open   source   community   website  at  http://www.openfab-
     rics.org/.





















OpenIB              Last change: May 31, 2007                   2