ibprintrt - man pages section 1M: System Administration Commands

Language:

ibprintrt (1m)

Name

ibprintrt - print either only the router specified or a list of routers from the ibnetdiscover output

Synopsis

ibprintrt.pl   [-R   -l   -C   <ca_name>    -P    <ca_port>]
[<rt_guid|node_name>]

Description




OpenIB Diagnostics                                  IBPRINTRT(1m)



NAME
     ibprintrt.pl  -  print either only the router specified or a
     list of routers from the ibnetdiscover output


SYNOPSIS
     ibprintrt.pl   [-R   -l   -C   <ca_name>    -P    <ca_port>]
     [<rt_guid|node_name>]


DESCRIPTION
     Faster  than  greping/viewing  with  an editor the output of
     ibnetdiscover, ibprintrt.pl will parse out and print  either
     the router information for the specified IB router or a list
     of all IB routers in the subnet.

     Finally, ibprintrt.pl will also reuse the  cached  ibnetdis-
     cover  output  from some of the other diag tools which makes
     it a bit faster than running ibnetdiscover from scratch.



OPTIONS
     -l   List the Rts (simply a wrapper for ibrouters).

     -R   Recalculate the ibnetdiscover information,  ie  do  not
          use  the cached information.  This option is slower but
          should be used if the diag tools have not been used for
          some time or if there are other reasons to believe that
          the fabric has changed.

     -C <ca_name>    use the specified ca_name for the search.

     -P <ca_port>    use the specified ca_port for the search.



AUTHOR
     Hal Rosenstock
          <[email protected]>



ATTRIBUTES
     See  attributes(5)  for  descriptions   of   the   following
     attributes:









OpenIB              Last change: May 31, 2007                   1






OpenIB Diagnostics                                  IBPRINTRT(1m)



     +---------------+----------------------+
     |ATTRIBUTE TYPE |   ATTRIBUTE VALUE    |
     +---------------+----------------------+
     |Availability   | network/open-fabrics |
     +---------------+----------------------+
     |Stability      | Volatile             |
     +---------------+----------------------+
NOTES
     This   software   was   built   from   source  available  at
     https://java.net/projects/solaris-userland.   The   original
     community  source was downloaded from  ['http://www.openfab-
     rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
     'http://www.openfabrics.org/downloads/libibverbs/libib-
     verbs-1.1.4-1.22.g7257cd3.tar.gz',      'http://www.openfab-
     rics.org/down-
     loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
     'http://www.openfabrics.org/downloads/libsdp/lib-
     sdp-1.1.108-0.15.gd7fdb72.tar.gz',      'http://www.openfab-
     rics.org/downloads/management/infiniband-
     diags-1.5.8.tar.gz',       'http://www.openfabrics.org/down-
     loads/management/libibmad-1.3.7.tar.gz',   'http://www.open-
     fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
     'http://www.openfabrics.org/downloads/manage-
     ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
     loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
     'http://www.openfabrics.org/down-
     loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
     'http://www.openfabrics.org/downloads/rdmacm/librd-
     macm-1.0.14.1.tar.gz',     'http://www.openfabrics.org/down-
     loads/rds-tools/rds-tools-2.0.4.tar.gz']

     Further information about this software can be found on  the
     open   source   community   website  at  http://www.openfab-
     rics.org/.





















OpenIB              Last change: May 31, 2007                   2