git-filter-branch
(1)
Name
git-filter-branch - Rewrite branches
Synopsis
git filter-branch [--env-filter <command>] [--tree-filter <command>]
[--index-filter <command>] [--parent-filter <command>]
[--msg-filter <command>] [--commit-filter <command>]
[--tag-name-filter <command>] [--subdirectory-filter <directory>]
[--prune-empty]
[--original <namespace>] [-d <directory>] [-f | --force]
[--] [<rev-list options>...]
Description
Git Manual GIT-FILTER-BRANCH(1)
NAME
git-filter-branch - Rewrite branches
SYNOPSIS
git filter-branch [--env-filter <command>] [--tree-filter <command>]
[--index-filter <command>] [--parent-filter <command>]
[--msg-filter <command>] [--commit-filter <command>]
[--tag-name-filter <command>] [--subdirectory-filter <directory>]
[--prune-empty]
[--original <namespace>] [-d <directory>] [-f | --force]
[--] [<rev-list options>...]
DESCRIPTION
Lets you rewrite git revision history by rewriting the
branches mentioned in the <rev-list options>, applying
custom filters on each revision. Those filters can modify
each tree (e.g. removing a file or running a perl rewrite on
all files) or information about each commit. Otherwise, all
information (including original commit times or merge
information) will be preserved.
The command will only rewrite the positive refs mentioned in
the command line (e.g. if you pass a..b, only b will be
rewritten). If you specify no filters, the commits will be
recommitted without any changes, which would normally have
no effect. Nevertheless, this may be useful in the future
for compensating for some git bugs or such, therefore such a
usage is permitted.
NOTE: This command honors .git/info/grafts and
.git/refs/replace/. If you have any grafts or replacement
refs defined, running this command will make them permanent.
WARNING! The rewritten history will have different object
names for all the objects and will not converge with the
original branch. You will not be able to easily push and
distribute the rewritten branch on top of the original
branch. Please do not use this command if you do not know
the full implications, and avoid using it anyway, if a
simple single commit would suffice to fix your problem. (See
the "RECOVERING FROM UPSTREAM REBASE" section in git-
rebase(1) for further information about rewriting published
history.)
Always verify that the rewritten version is correct: The
original refs, if different from the rewritten ones, will be
stored in the namespace refs/original/.
Note that since this operation is very I/O expensive, it
might be a good idea to redirect the temporary directory
off-disk with the -d option, e.g. on tmpfs. Reportedly the
Git 1.7.9.2 Last change: 02/22/2012 1
Git Manual GIT-FILTER-BRANCH(1)
speedup is very noticeable.
Filters
The filters are applied in the order as listed below. The
<command> argument is always evaluated in the shell context
using the eval command (with the notable exception of the
commit filter, for technical reasons). Prior to that, the
$GIT_COMMIT environment variable will be set to contain the
id of the commit being rewritten. Also, GIT_AUTHOR_NAME,
GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME,
GIT_COMMITTER_EMAIL, and GIT_COMMITTER_DATE are set
according to the current commit. The values of these
variables after the filters have run, are used for the new
commit. If any evaluation of <command> returns a non-zero
exit status, the whole operation will be aborted.
A map function is available that takes an "original sha1 id"
argument and outputs a "rewritten sha1 id" if the commit has
been already rewritten, and "original sha1 id" otherwise;
the map function can return several ids on separate lines if
your commit filter emitted multiple commits.
OPTIONS
--env-filter <command>
This filter may be used if you only need to modify the
environment in which the commit will be performed.
Specifically, you might want to rewrite the
author/committer name/email/time environment variables
(see git-commit-tree(1) for details). Do not forget to
re-export the variables.
--tree-filter <command>
This is the filter for rewriting the tree and its
contents. The argument is evaluated in shell with the
working directory set to the root of the checked out
tree. The new tree is then used as-is (new files are
auto-added, disappeared files are auto-removed - neither
.gitignore files nor any other ignore rules HAVE ANY
EFFECT!).
--index-filter <command>
This is the filter for rewriting the index. It is
similar to the tree filter but does not check out the
tree, which makes it much faster. Frequently used with
git rm --cached --ignore-unmatch ..., see EXAMPLES
below. For hairy cases, see git-update-index(1).
--parent-filter <command>
This is the filter for rewriting the commit's parent
list. It will receive the parent string on stdin and
shall output the new parent string on stdout. The parent
string is in the format described in git-commit-tree(1):
Git 1.7.9.2 Last change: 02/22/2012 2
Git Manual GIT-FILTER-BRANCH(1)
empty for the initial commit, "-p parent" for a normal
commit and "-p parent1 -p parent2 -p parent3 ..." for a
merge commit.
--msg-filter <command>
This is the filter for rewriting the commit messages.
The argument is evaluated in the shell with the original
commit message on standard input; its standard output is
used as the new commit message.
--commit-filter <command>
This is the filter for performing the commit. If this
filter is specified, it will be called instead of the
git commit-tree command, with arguments of the form
"<TREE_ID> [(-p <PARENT_COMMIT_ID>)...]" and the log
message on stdin. The commit id is expected on stdout.
As a special extension, the commit filter may emit
multiple commit ids; in that case, the rewritten
children of the original commit will have all of them as
parents.
You can use the map convenience function in this filter,
and other convenience functions, too. For example,
calling skip_commit "$@" will leave out the current
commit (but not its changes! If you want that, use git
rebase instead).
You can also use the git_commit_non_empty_tree "$@"
instead of git commit-tree "$@" if you don't wish to
keep commits with a single parent and that makes no
change to the tree.
--tag-name-filter <command>
This is the filter for rewriting tag names. When passed,
it will be called for every tag ref that points to a
rewritten object (or to a tag object which points to a
rewritten object). The original tag name is passed via
standard input, and the new tag name is expected on
standard output.
The original tags are not deleted, but can be
overwritten; use "--tag-name-filter cat" to simply
update the tags. In this case, be very careful and make
sure you have the old tags backed up in case the
conversion has run afoul.
Nearly proper rewriting of tag objects is supported. If
the tag has a message attached, a new tag object will be
created with the same message, author, and timestamp. If
the tag has a signature attached, the signature will be
stripped. It is by definition impossible to preserve
Git 1.7.9.2 Last change: 02/22/2012 3
Git Manual GIT-FILTER-BRANCH(1)
signatures. The reason this is "nearly" proper, is
because ideally if the tag did not change (points to the
same object, has the same name, etc.) it should retain
any signature. That is not the case, signatures will
always be removed, buyer beware. There is also no
support for changing the author or timestamp (or the tag
message for that matter). Tags which point to other tags
will be rewritten to point to the underlying commit.
--subdirectory-filter <directory>
Only look at the history which touches the given
subdirectory. The result will contain that directory
(and only that) as its project root. Implies the section
called "Remap to ancestor".
--prune-empty
Some kind of filters will generate empty commits, that
left the tree untouched. This switch allow
git-filter-branch to ignore such commits. Though, this
switch only applies for commits that have one and only
one parent, it will hence keep merges points. Also, this
option is not compatible with the use of
--commit-filter. Though you just need to use the
function git_commit_non_empty_tree "$@" instead of the
git commit-tree "$@" idiom in your commit filter to make
that happen.
--original <namespace>
Use this option to set the namespace where the original
commits will be stored. The default value is
refs/original.
-d <directory>
Use this option to set the path to the temporary
directory used for rewriting. When applying a tree
filter, the command needs to temporarily check out the
tree to some directory, which may consume considerable
space in case of large projects. By default it does this
in the .git-rewrite/ directory but you can override that
choice by this parameter.
-f, --force
git filter-branch refuses to start with an existing
temporary directory or when there are already refs
starting with refs/original/, unless forced.
<rev-list options>...
Arguments for git rev-list. All positive refs included
by these options are rewritten. You may also specify
options such as --all, but you must use -- to separate
them from the git filter-branch options. Implies the
Git 1.7.9.2 Last change: 02/22/2012 4
Git Manual GIT-FILTER-BRANCH(1)
section called "Remap to ancestor".
Remap to ancestor
By using rev-list(1) arguments, e.g., path limiters, you can
limit the set of revisions which get rewritten. However,
positive refs on the command line are distinguished: we
don't let them be excluded by such limiters. For this
purpose, they are instead rewritten to point at the nearest
ancestor that was not excluded.
EXAMPLES
Suppose you want to remove a file (containing confidential
information or copyright violation) from all commits:
git filter-branch --tree-filter 'rm filename' HEAD
However, if the file is absent from the tree of some commit,
a simple rm filename will fail for that tree and commit.
Thus you may instead want to use rm -f filename as the
script.
Using --index-filter with git rm yields a significantly
faster version. Like with using rm filename, git rm --cached
filename will fail if the file is absent from the tree of a
commit. If you want to "completely forget" a file, it does
not matter when it entered history, so we also add
--ignore-unmatch:
git filter-branch --index-filter 'git rm --cached --ignore-unmatch filename' HEAD
Now, you will get the rewritten history saved in HEAD.
To rewrite the repository to look as if foodir/ had been its
project root, and discard all other history:
git filter-branch --subdirectory-filter foodir -- --all
Thus you can, e.g., turn a library subdirectory into a
repository of its own. Note the -- that separates
filter-branch options from revision options, and the --all
to rewrite all branches and tags.
To set a commit (which typically is at the tip of another
history) to be the parent of the current initial commit, in
order to paste the other history behind the current history:
git filter-branch --parent-filter 'sed "s/^\$/-p <graft-id>/"' HEAD
Git 1.7.9.2 Last change: 02/22/2012 5
Git Manual GIT-FILTER-BRANCH(1)
(if the parent string is empty - which happens when we are
dealing with the initial commit - add graftcommit as a
parent). Note that this assumes history with a single root
(that is, no merge without common ancestors happened). If
this is not the case, use:
git filter-branch --parent-filter \
'test $GIT_COMMIT = <commit-id> && echo "-p <graft-id>" || cat' HEAD
or even simpler:
echo "$commit-id $graft-id" >> .git/info/grafts
git filter-branch $graft-id..HEAD
To remove commits authored by "Darl McBribe" from the
history:
git filter-branch --commit-filter '
if [ "$GIT_AUTHOR_NAME" = "Darl McBribe" ];
then
skip_commit "$@";
else
git commit-tree "$@";
fi' HEAD
The function skip_commit is defined as follows:
skip_commit()
{
shift;
while [ -n "$1" ];
do
shift;
map "$1";
shift;
done;
}
The shift magic first throws away the tree id and then the
-p parameters. Note that this handles merges properly! In
case Darl committed a merge between P1 and P2, it will be
propagated properly and all children of the merge will
become merge commits with P1,P2 as their parents instead of
the merge commit.
You can rewrite the commit log messages using --msg-filter.
For example, git svn-id strings in a repository created by
git svn can be removed this way:
Git 1.7.9.2 Last change: 02/22/2012 6
Git Manual GIT-FILTER-BRANCH(1)
git filter-branch --msg-filter '
sed -e "/^git-svn-id:/d"
'
To restrict rewriting to only part of the history, specify a
revision range in addition to the new branch name. The new
branch name will point to the top-most revision that a git
rev-list of this range will print.
If you need to add Acked-by lines to, say, the last 10
commits (none of which is a merge), use this command:
git filter-branch --msg-filter '
cat &&
echo "Acked-by: Bugs Bunny <[email protected]>"
' HEAD~10..HEAD
NOTE the changes introduced by the commits, and which are
not reverted by subsequent commits, will still be in the
rewritten branch. If you want to throw out changes together
with the commits, you should use the interactive mode of git
rebase.
Consider this history:
D--E--F--G--H
/ /
A--B-----C
To rewrite only commits D,E,F,G,H, but leave A, B and C
alone, use:
git filter-branch ... C..H
To rewrite commits E,F,G,H, use one of these:
git filter-branch ... C..H --not D
git filter-branch ... D..H --not C
To move the whole tree into a subdirectory, or remove it
from there:
git filter-branch --index-filter \
'git ls-files -s | sed "s-\t\"*-&newsubdir/-" |
GIT_INDEX_FILE=$GIT_INDEX_FILE.new \
git update-index --index-info &&
mv "$GIT_INDEX_FILE.new" "$GIT_INDEX_FILE"' HEAD
Git 1.7.9.2 Last change: 02/22/2012 7
Git Manual GIT-FILTER-BRANCH(1)
CHECKLIST FOR SHRINKING A REPOSITORY
git-filter-branch is often used to get rid of a subset of
files, usually with some combination of --index-filter and
--subdirectory-filter. People expect the resulting
repository to be smaller than the original, but you need a
few more steps to actually make it smaller, because git
tries hard not to lose your objects until you tell it to.
First make sure that:
o You really removed all variants of a filename, if a blob
was moved over its lifetime. git log --name-only
--follow --all -- filename can help you find renames.
o You really filtered all refs: use --tag-name-filter cat
-- --all when calling git-filter-branch.
Then there are two ways to get a smaller repository. A safer
way is to clone, that keeps your original intact.
o Clone it with git clone file:///path/to/repo. The clone
will not have the removed objects. See git-clone(1).
(Note that cloning with a plain path just hardlinks
everything!)
If you really don't want to clone it, for whatever reasons,
check the following points instead (in this order). This is
a very destructive approach, so make a backup or go back to
cloning it. You have been warned.
o Remove the original refs backed up by git-filter-branch:
say git for-each-ref --format="%(refname)"
refs/original/ | xargs -n 1 git update-ref -d.
o Expire all reflogs with git reflog expire --expire=now
--all.
o Garbage collect all unreferenced objects with git gc
--prune=now (or if your git-gc is not new enough to
support arguments to --prune, use git repack -ad; git
prune instead).
GIT
Part of the git(1) suite
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
Git 1.7.9.2 Last change: 02/22/2012 8
Git Manual GIT-FILTER-BRANCH(1)
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | developer/versioning/git |
+---------------+--------------------------+
|Stability | Uncommitted |
+---------------+--------------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from http://git-
core.googlecode.com/files/git-1.7.9.2.tar.gz
Further information about this software can be found on the
open source community website at http://git-scm.com/.
Git 1.7.9.2 Last change: 02/22/2012 9