perlfaq8
(1)
Name
perlfaq8 - System Interaction
Synopsis
Please see following description for synopsis
Description
Perl Programmers Reference Guide PERLFAQ8(1)
NAME
perlfaq8 - System Interaction
DESCRIPTION
This section of the Perl FAQ covers questions involving
operating system interaction. Topics include interprocess
communication (IPC), control over the user-interface
(keyboard, screen and pointing devices), and most anything
else not related to data manipulation.
Read the FAQs and documentation specific to the port of perl
to your operating system (eg, perlvms, perlplan9, ...).
These should contain more detailed information on the
vagaries of your perl.
How do I find out which operating system I'm running under?
The $^O variable ($OSNAME if you use "English") contains an
indication of the name of the operating system (not its
release number) that your perl binary was built for.
How come exec() doesn't return?
(contributed by brian d foy)
The "exec" function's job is to turn your process into
another command and never to return. If that's not what you
want to do, don't use "exec". :)
If you want to run an external command and still keep your
Perl process going, look at a piped "open", "fork", or
"system".
How do I do fancy stuff with the keyboard/screen/mouse?
How you access/control keyboards, screens, and pointing
devices ("mice") is system-dependent. Try the following
modules:
Keyboard
Term::Cap Standard perl distribution
Term::ReadKey CPAN
Term::ReadLine::Gnu CPAN
Term::ReadLine::Perl CPAN
Term::Screen CPAN
Screen
Term::Cap Standard perl distribution
Curses CPAN
Term::ANSIColor CPAN
Mouse
Tk CPAN
perl v5.12.5 Last change: 2012-11-03 1
Perl Programmers Reference Guide PERLFAQ8(1)
Some of these specific cases are shown as examples in other
answers in this section of the perlfaq.
How do I print something out in color?
In general, you don't, because you don't know whether the
recipient has a color-aware display device. If you know
that they have an ANSI terminal that understands color, you
can use the "Term::ANSIColor" module from CPAN:
use Term::ANSIColor;
print color("red"), "Stop!\n", color("reset");
print color("green"), "Go!\n", color("reset");
Or like this:
use Term::ANSIColor qw(:constants);
print RED, "Stop!\n", RESET;
print GREEN, "Go!\n", RESET;
How do I read just one key without waiting for a return key?
Controlling input buffering is a remarkably system-dependent
matter. On many systems, you can just use the stty command
as shown in "getc" in perlfunc, but as you see, that's
already getting you into portability snags.
open(TTY, "+</dev/tty") or die "no tty: $!";
system "stty cbreak </dev/tty >/dev/tty 2>&1";
$key = getc(TTY); # perhaps this works
# OR ELSE
sysread(TTY, $key, 1); # probably this does
system "stty -cbreak </dev/tty >/dev/tty 2>&1";
The "Term::ReadKey" module from CPAN offers an easy-to-use
interface that should be more efficient than shelling out to
stty for each key. It even includes limited support for
Windows.
use Term::ReadKey;
ReadMode('cbreak');
$key = ReadKey(0);
ReadMode('normal');
However, using the code requires that you have a working C
compiler and can use it to build and install a CPAN module.
Here's a solution using the standard "POSIX" module, which
is already on your system (assuming your system supports
POSIX).
use HotKey;
$key = readkey();
perl v5.12.5 Last change: 2012-11-03 2
Perl Programmers Reference Guide PERLFAQ8(1)
And here's the "HotKey" module, which hides the somewhat
mystifying calls to manipulate the POSIX termios structures.
# HotKey.pm
package HotKey;
@ISA = qw(Exporter);
@EXPORT = qw(cbreak cooked readkey);
use strict;
use POSIX qw(:termios_h);
my ($term, $oterm, $echo, $noecho, $fd_stdin);
$fd_stdin = fileno(STDIN);
$term = POSIX::Termios->new();
$term->getattr($fd_stdin);
$oterm = $term->getlflag();
$echo = ECHO | ECHOK | ICANON;
$noecho = $oterm & ~$echo;
sub cbreak {
$term->setlflag($noecho); # ok, so i don't want echo either
$term->setcc(VTIME, 1);
$term->setattr($fd_stdin, TCSANOW);
}
sub cooked {
$term->setlflag($oterm);
$term->setcc(VTIME, 0);
$term->setattr($fd_stdin, TCSANOW);
}
sub readkey {
my $key = '';
cbreak();
sysread(STDIN, $key, 1);
cooked();
return $key;
}
END { cooked() }
1;
How do I check whether input is ready on the keyboard?
The easiest way to do this is to read a key in nonblocking
mode with the "Term::ReadKey" module from CPAN, passing it
an argument of -1 to indicate not to block:
use Term::ReadKey;
perl v5.12.5 Last change: 2012-11-03 3
Perl Programmers Reference Guide PERLFAQ8(1)
ReadMode('cbreak');
if (defined ($char = ReadKey(-1)) ) {
# input was waiting and it was $char
} else {
# no input was waiting
}
ReadMode('normal'); # restore normal tty settings
How do I clear the screen?
(contributed by brian d foy)
To clear the screen, you just have to print the special
sequence that tells the terminal to clear the screen. Once
you have that sequence, output it when you want to clear the
screen.
You can use the "Term::ANSIScreen" module to get the special
sequence. Import the "cls" function (or the ":screen" tag):
use Term::ANSIScreen qw(cls);
my $clear_screen = cls();
print $clear_screen;
The "Term::Cap" module can also get the special sequence if
you want to deal with the low-level details of terminal
control. The "Tputs" method returns the string for the given
capability:
use Term::Cap;
$terminal = Term::Cap->Tgetent( { OSPEED => 9600 } );
$clear_string = $terminal->Tputs('cl');
print $clear_screen;
On Windows, you can use the "Win32::Console" module. After
creating an object for the output filehandle you want to
affect, call the "Cls" method:
Win32::Console;
$OUT = Win32::Console->new(STD_OUTPUT_HANDLE);
my $clear_string = $OUT->Cls;
print $clear_screen;
If you have a command-line program that does the job, you
can call it in backticks to capture whatever it outputs so
you can use it later:
perl v5.12.5 Last change: 2012-11-03 4
Perl Programmers Reference Guide PERLFAQ8(1)
$clear_string = `clear`;
print $clear_string;
How do I get the screen size?
If you have "Term::ReadKey" module installed from CPAN, you
can use it to fetch the width and height in characters and
in pixels:
use Term::ReadKey;
($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize();
This is more portable than the raw "ioctl", but not as
illustrative:
require 'sys/ioctl.ph';
die "no TIOCGWINSZ " unless defined &TIOCGWINSZ;
open(TTY, "+</dev/tty") or die "No tty: $!";
unless (ioctl(TTY, &TIOCGWINSZ, $winsize='')) {
die sprintf "$0: ioctl TIOCGWINSZ (%08x: $!)\n", &TIOCGWINSZ;
}
($row, $col, $xpixel, $ypixel) = unpack('S4', $winsize);
print "(row,col) = ($row,$col)";
print " (xpixel,ypixel) = ($xpixel,$ypixel)" if $xpixel || $ypixel;
print "\n";
How do I ask the user for a password?
(This question has nothing to do with the web. See a
different FAQ for that.)
There's an example of this in "crypt" in perlfunc). First,
you put the terminal into "no echo" mode, then just read the
password normally. You may do this with an old-style
"ioctl()" function, POSIX terminal control (see POSIX or its
documentation the Camel Book), or a call to the stty
program, with varying degrees of portability.
You can also do this for most systems using the
"Term::ReadKey" module from CPAN, which is easier to use and
in theory more portable.
use Term::ReadKey;
ReadMode('noecho');
$password = ReadLine(0);
How do I read and write the serial port?
This depends on which operating system your program is
running on. In the case of Unix, the serial ports will be
accessible through files in /dev; on other systems, device
names will doubtless differ. Several problem areas common
to all device interaction are the following:
perl v5.12.5 Last change: 2012-11-03 5
Perl Programmers Reference Guide PERLFAQ8(1)
lockfiles
Your system may use lockfiles to control multiple
access. Make sure you follow the correct protocol.
Unpredictable behavior can result from multiple
processes reading from one device.
open mode
If you expect to use both read and write operations on
the device, you'll have to open it for update (see
"open" in perlfunc for details). You may wish to open
it without running the risk of blocking by using
"sysopen()" and "O_RDWR|O_NDELAY|O_NOCTTY" from the
"Fcntl" module (part of the standard perl distribution).
See "sysopen" in perlfunc for more on this approach.
end of line
Some devices will be expecting a "\r" at the end of each
line rather than a "\n". In some ports of perl, "\r"
and "\n" are different from their usual (Unix) ASCII
values of "\012" and "\015". You may have to give the
numeric values you want directly, using octal ("\015"),
hex ("0x0D"), or as a control-character specification
("\cM").
print DEV "atv1\012"; # wrong, for some devices
print DEV "atv1\015"; # right, for some devices
Even though with normal text files a "\n" will do the
trick, there is still no unified scheme for terminating
a line that is portable between Unix, DOS/Win, and
Macintosh, except to terminate ALL line ends with
"\015\012", and strip what you don't need from the
output. This applies especially to socket I/O and
autoflushing, discussed next.
flushing output
If you expect characters to get to your device when you
"print()" them, you'll want to autoflush that
filehandle. You can use "select()" and the $| variable
to control autoflushing (see "$|" in perlvar and
"select" in perlfunc, or perlfaq5, "How do I
flush/unbuffer an output filehandle? Why must I do
this?"):
$oldh = select(DEV);
$| = 1;
select($oldh);
You'll also see code that does this without a temporary
variable, as in
select((select(DEV), $| = 1)[0]);
perl v5.12.5 Last change: 2012-11-03 6
Perl Programmers Reference Guide PERLFAQ8(1)
Or if you don't mind pulling in a few thousand lines of
code just because you're afraid of a little $| variable:
use IO::Handle;
DEV->autoflush(1);
As mentioned in the previous item, this still doesn't
work when using socket I/O between Unix and Macintosh.
You'll need to hard code your line terminators, in that
case.
non-blocking input
If you are doing a blocking "read()" or "sysread()",
you'll have to arrange for an alarm handler to provide a
timeout (see "alarm" in perlfunc). If you have a non-
blocking open, you'll likely have a non-blocking read,
which means you may have to use a 4-arg "select()" to
determine whether I/O is ready on that device (see
"select" in perlfunc.
While trying to read from his caller-id box, the notorious
Jamie Zawinski "<[email protected]>", after much gnashing of
teeth and fighting with "sysread", "sysopen", POSIX's
"tcgetattr" business, and various other functions that go
bump in the night, finally came up with this:
sub open_modem {
use IPC::Open2;
my $stty = `/bin/stty -g`;
open2( \*MODEM_IN, \*MODEM_OUT, "cu -l$modem_device -s2400 2>&1");
# starting cu hoses /dev/tty's stty settings, even when it has
# been opened on a pipe...
system("/bin/stty $stty");
$_ = <MODEM_IN>;
chomp;
if ( !m/^Connected/ ) {
print STDERR "$0: cu printed `$_' instead of `Connected'\n";
}
}
How do I decode encrypted password files?
You spend lots and lots of money on dedicated hardware, but
this is bound to get you talked about.
Seriously, you can't if they are Unix password files--the
Unix password system employs one-way encryption. It's more
like hashing than encryption. The best you can do is check
whether something else hashes to the same string. You can't
turn a hash back into the original string. Programs like
Crack can forcibly (and intelligently) try to guess
passwords, but don't (can't) guarantee quick success.
perl v5.12.5 Last change: 2012-11-03 7
Perl Programmers Reference Guide PERLFAQ8(1)
If you're worried about users selecting bad passwords, you
should proactively check when they try to change their
password (by modifying passwd(1), for example).
How do I start a process in the background?
(contributed by brian d foy)
There's not a single way to run code in the background so
you don't have to wait for it to finish before your program
moves on to other tasks. Process management depends on your
particular operating system, and many of the techniques are
in perlipc.
Several CPAN modules may be able to help, including
"IPC::Open2" or "IPC::Open3", "IPC::Run", "Parallel::Jobs",
"Parallel::ForkManager", "POE", "Proc::Background", and
"Win32::Process". There are many other modules you might
use, so check those namespaces for other options too.
If you are on a Unix-like system, you might be able to get
away with a system call where you put an "&" on the end of
the command:
system("cmd &")
You can also try using "fork", as described in perlfunc
(although this is the same thing that many of the modules
will do for you).
STDIN, STDOUT, and STDERR are shared
Both the main process and the backgrounded one (the
"child" process) share the same STDIN, STDOUT and STDERR
filehandles. If both try to access them at once,
strange things can happen. You may want to close or
reopen these for the child. You can get around this
with "open"ing a pipe (see "open" in perlfunc) but on
some systems this means that the child process cannot
outlive the parent.
Signals
You'll have to catch the SIGCHLD signal, and possibly
SIGPIPE too. SIGCHLD is sent when the backgrounded
process finishes. SIGPIPE is sent when you write to a
filehandle whose child process has closed (an untrapped
SIGPIPE can cause your program to silently die). This
is not an issue with "system("cmd&")".
Zombies
You have to be prepared to "reap" the child process when
it finishes.
$SIG{CHLD} = sub { wait };
perl v5.12.5 Last change: 2012-11-03 8
Perl Programmers Reference Guide PERLFAQ8(1)
$SIG{CHLD} = 'IGNORE';
You can also use a double fork. You immediately "wait()"
for your first child, and the init daemon will "wait()"
for your grandchild once it exits.
unless ($pid = fork) {
unless (fork) {
exec "what you really wanna do";
die "exec failed!";
}
exit 0;
}
waitpid($pid, 0);
See "Signals" in perlipc for other examples of code to
do this. Zombies are not an issue with "system("prog
&")".
How do I trap control characters/signals?
You don't actually "trap" a control character. Instead,
that character generates a signal which is sent to your
terminal's currently foregrounded process group, which you
then trap in your process. Signals are documented in
"Signals" in perlipc and the section on "Signals" in the
Camel.
You can set the values of the %SIG hash to be the functions
you want to handle the signal. After perl catches the
signal, it looks in %SIG for a key with the same name as the
signal, then calls the subroutine value for that key.
# as an anonymous subroutine
$SIG{INT} = sub { syswrite(STDERR, "ouch\n", 5 ) };
# or a reference to a function
$SIG{INT} = \&ouch;
# or the name of the function as a string
$SIG{INT} = "ouch";
Perl versions before 5.8 had in its C source code signal
handlers which would catch the signal and possibly run a
Perl function that you had set in %SIG. This violated the
rules of signal handling at that level causing perl to dump
core. Since version 5.8.0, perl looks at %SIG after the
signal has been caught, rather than while it is being
caught. Previous versions of this answer were incorrect.
perl v5.12.5 Last change: 2012-11-03 9
Perl Programmers Reference Guide PERLFAQ8(1)
How do I modify the shadow password file on a Unix system?
If perl was installed correctly and your shadow library was
written properly, the "getpw*()" functions described in
perlfunc should in theory provide (read-only) access to
entries in the shadow password file. To change the file,
make a new shadow password file (the format varies from
system to system--see passwd for specifics) and use
pwd_mkdb(8) to install it (see pwd_mkdb for more details).
How do I set the time and date?
Assuming you're running under sufficient permissions, you
should be able to set the system-wide date and time by
running the date(1) program. (There is no way to set the
time and date on a per-process basis.) This mechanism will
work for Unix, MS-DOS, Windows, and NT; the VMS equivalent
is "set time".
However, if all you want to do is change your time zone, you
can probably get away with setting an environment variable:
$ENV{TZ} = "MST7MDT"; # Unixish
$ENV{'SYS$TIMEZONE_DIFFERENTIAL'}="-5" # vms
system "trn comp.lang.perl.misc";
How can I sleep() or alarm() for under a second?
If you want finer granularity than the 1 second that the
"sleep()" function provides, the easiest way is to use the
"select()" function as documented in "select" in perlfunc.
Try the "Time::HiRes" and the "BSD::Itimer" modules
(available from CPAN, and starting from Perl 5.8
"Time::HiRes" is part of the standard distribution).
How can I measure time under a second?
(contributed by brian d foy)
The "Time::HiRes" module (part of the standard distribution
as of Perl 5.8) measures time with the "gettimeofday()"
system call, which returns the time in microseconds since
the epoch. If you can't install "Time::HiRes" for older
Perls and you are on a Unixish system, you may be able to
call gettimeofday(2) directly. See "syscall" in perlfunc.
How can I do an atexit() or setjmp()/longjmp()? (Exception
handling)
You can use the "END" block to simulate "atexit()". Each
package's "END" block is called when the program or thread
ends See perlmod manpage for more details about "END"
blocks.
For example, you can use this to make sure your filter
program managed to finish its output without filling up the
disk:
perl v5.12.5 Last change: 2012-11-03 10
Perl Programmers Reference Guide PERLFAQ8(1)
END {
close(STDOUT) || die "stdout close failed: $!";
}
The "END" block isn't called when untrapped signals kill the
program, though, so if you use "END" blocks you should also
use
use sigtrap qw(die normal-signals);
Perl's exception-handling mechanism is its "eval()"
operator. You can use "eval()" as "setjmp" and "die()" as
"longjmp". For details of this, see the section on signals,
especially the time-out handler for a blocking "flock()" in
"Signals" in perlipc or the section on "Signals" in
Programming Perl.
If exception handling is all you're interested in, use one
of the many CPAN modules that handle exceptions, such as
"Try::Tiny".
If you want the "atexit()" syntax (and an "rmexit()" as
well), try the "AtExit" module available from CPAN.
Why doesn't my sockets program work under System V (Solaris)?
What does the error message "Protocol not supported" mean?
Some Sys-V based systems, notably Solaris 2.X, redefined
some of the standard socket constants. Since these were
constant across all architectures, they were often hardwired
into perl code. The proper way to deal with this is to "use
Socket" to get the correct values.
Note that even though SunOS and Solaris are binary
compatible, these values are different. Go figure.
How can I call my system's unique C functions from Perl?
In most cases, you write an external module to do it--see
the answer to "Where can I learn about linking C with Perl?
[h2xs, xsubpp]". However, if the function is a system call,
and your system supports "syscall()", you can use the
"syscall" function (documented in perlfunc).
Remember to check the modules that came with your
distribution, and CPAN as well--someone may already have
written a module to do it. On Windows, try "Win32::API". On
Macs, try "Mac::Carbon". If no module has an interface to
the C function, you can inline a bit of C in your Perl
source with "Inline::C".
Where do I get the include files to do ioctl() or syscall()?
perl v5.12.5 Last change: 2012-11-03 11
Perl Programmers Reference Guide PERLFAQ8(1)
Historically, these would be generated by the "h2ph" tool,
part of the standard perl distribution. This program
converts cpp(1) directives in C header files to files
containing subroutine definitions, like &SYS_getitimer,
which you can use as arguments to your functions. It
doesn't work perfectly, but it usually gets most of the job
done. Simple files like errno.h, syscall.h, and socket.h
were fine, but the hard ones like ioctl.h nearly always need
to be hand-edited. Here's how to install the *.ph files:
1. become super-user
2. cd /usr/include
3. h2ph *.h */*.h
If your system supports dynamic loading, for reasons of
portability and sanity you probably ought to use "h2xs"
(also part of the standard perl distribution). This tool
converts C header files to Perl extensions. See perlxstut
for how to get started with "h2xs".
If your system doesn't support dynamic loading, you still
probably ought to use "h2xs". See perlxstut and
ExtUtils::MakeMaker for more information (in brief, just use
make perl instead of a plain make to rebuild perl with a new
static extension).
Why do setuid perl scripts complain about kernel problems?
Some operating systems have bugs in the kernel that make
setuid scripts inherently insecure. Perl gives you a number
of options (described in perlsec) to work around such
systems.
How can I open a pipe both to and from a command?
The "IPC::Open2" module (part of the standard perl
distribution) is an easy-to-use approach that internally
uses "pipe()", "fork()", and "exec()" to do the job. Make
sure you read the deadlock warnings in its documentation,
though (see IPC::Open2). See "Bidirectional Communication
with Another Process" in perlipc and "Bidirectional
Communication with Yourself" in perlipc
You may also use the "IPC::Open3" module (part of the
standard perl distribution), but be warned that it has a
different order of arguments from "IPC::Open2" (see
IPC::Open3).
Why can't I get the output of a command with system()?
You're confusing the purpose of "system()" and backticks
(``). "system()" runs a command and returns exit status
information (as a 16 bit value: the low 7 bits are the
signal the process died from, if any, and the high 8 bits
are the actual exit value). Backticks (``) run a command
perl v5.12.5 Last change: 2012-11-03 12
Perl Programmers Reference Guide PERLFAQ8(1)
and return what it sent to STDOUT.
$exit_status = system("mail-users");
$output_string = `ls`;
How can I capture STDERR from an external command?
There are three basic ways of running external commands:
system $cmd; # using system()
$output = `$cmd`; # using backticks (``)
open (PIPE, "cmd |"); # using open()
With "system()", both STDOUT and STDERR will go the same
place as the script's STDOUT and STDERR, unless the
"system()" command redirects them. Backticks and "open()"
read only the STDOUT of your command.
You can also use the "open3()" function from "IPC::Open3".
Benjamin Goldberg provides some sample code:
To capture a program's STDOUT, but discard its STDERR:
use IPC::Open3;
use File::Spec;
use Symbol qw(gensym);
open(NULL, ">", File::Spec->devnull);
my $pid = open3(gensym, \*PH, ">&NULL", "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, but discard its STDOUT:
use IPC::Open3;
use File::Spec;
use Symbol qw(gensym);
open(NULL, ">", File::Spec->devnull);
my $pid = open3(gensym, ">&NULL", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, and let its STDOUT go to our
own STDERR:
use IPC::Open3;
use Symbol qw(gensym);
my $pid = open3(gensym, ">&STDERR", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To read both a command's STDOUT and its STDERR separately,
you can redirect them to temp files, let the command run,
then read the temp files:
perl v5.12.5 Last change: 2012-11-03 13
Perl Programmers Reference Guide PERLFAQ8(1)
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
local *CATCHOUT = IO::File->new_tmpfile;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, ">&CATCHOUT", ">&CATCHERR", "cmd");
waitpid($pid, 0);
seek $_, 0, 0 for \*CATCHOUT, \*CATCHERR;
while( <CATCHOUT> ) {}
while( <CATCHERR> ) {}
But there's no real need for both to be tempfiles... the
following should work just as well, without deadlocking:
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, \*CATCHOUT, ">&CATCHERR", "cmd");
while( <CATCHOUT> ) {}
waitpid($pid, 0);
seek CATCHERR, 0, 0;
while( <CATCHERR> ) {}
And it'll be faster, too, since we can begin processing the
program's stdout immediately, rather than waiting for the
program to finish.
With any of these, you can change file descriptors before
the call:
open(STDOUT, ">logfile");
system("ls");
or you can use Bourne shell file-descriptor redirection:
$output = `$cmd 2>some_file`;
open (PIPE, "cmd 2>some_file |");
You can also use file-descriptor redirection to make STDERR
a duplicate of STDOUT:
$output = `$cmd 2>&1`;
open (PIPE, "cmd 2>&1 |");
Note that you cannot simply open STDERR to be a dup of
STDOUT in your Perl program and avoid calling the shell to
do the redirection. This doesn't work:
open(STDERR, ">&STDOUT");
$alloutput = `cmd args`; # stderr still escapes
perl v5.12.5 Last change: 2012-11-03 14
Perl Programmers Reference Guide PERLFAQ8(1)
This fails because the "open()" makes STDERR go to where
STDOUT was going at the time of the "open()". The backticks
then make STDOUT go to a string, but don't change STDERR
(which still goes to the old STDOUT).
Note that you must use Bourne shell (sh(1)) redirection
syntax in backticks, not csh(1)! Details on why Perl's
"system()" and backtick and pipe opens all use the Bourne
shell are in the versus/csh.whynot article in the "Far More
Than You Ever Wanted To Know" collection in
http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz . To capture
a command's STDERR and STDOUT together:
$output = `cmd 2>&1`; # either with backticks
$pid = open(PH, "cmd 2>&1 |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDERR but discard its STDOUT:
$output = `cmd 2>&1 1>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>&1 1>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To exchange a command's STDOUT and STDERR in order to
capture the STDERR but leave its STDOUT to come out our old
STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`; # either with backticks
$pid = open(PH, "cmd 3>&1 1>&2 2>&3 3>&-|");# or with an open pipe
while (<PH>) { } # plus a read
To read both a command's STDOUT and its STDERR separately,
it's easiest to redirect them separately to files, and then
read from those files when the program is done:
system("program args 1>program.stdout 2>program.stderr");
Ordering is important in all these examples. That's because
the shell processes file descriptor redirections in strictly
left to right order.
system("prog args 1>tmpfile 2>&1");
system("prog args 2>&1 1>tmpfile");
The first command sends both standard out and standard error
to the temporary file. The second command sends only the
perl v5.12.5 Last change: 2012-11-03 15
Perl Programmers Reference Guide PERLFAQ8(1)
old standard output there, and the old standard error shows
up on the old standard out.
Why doesn't open() return an error when a pipe open fails?
If the second argument to a piped "open()" contains shell
metacharacters, perl "fork()"s, then "exec()"s a shell to
decode the metacharacters and eventually run the desired
program. If the program couldn't be run, it's the shell
that gets the message, not Perl. All your Perl program can
find out is whether the shell itself could be successfully
started. You can still capture the shell's STDERR and check
it for error messages. See "How can I capture STDERR from
an external command?" elsewhere in this document, or use the
"IPC::Open3" module.
If there are no shell metacharacters in the argument of
"open()", Perl runs the command directly, without using the
shell, and can correctly report whether the command started.
What's wrong with using backticks in a void context?
Strictly speaking, nothing. Stylistically speaking, it's
not a good way to write maintainable code. Perl has several
operators for running external commands. Backticks are one;
they collect the output from the command for use in your
program. The "system" function is another; it doesn't do
this.
Writing backticks in your program sends a clear message to
the readers of your code that you wanted to collect the
output of the command. Why send a clear message that isn't
true?
Consider this line:
`cat /etc/termcap`;
You forgot to check $? to see whether the program even ran
correctly. Even if you wrote
print `cat /etc/termcap`;
this code could and probably should be written as
system("cat /etc/termcap") == 0
or die "cat program failed!";
which will echo the cat command's output as it is generated,
instead of waiting until the program has completed to print
it out. It also checks the return value.
"system" also provides direct control over whether shell
wildcard processing may take place, whereas backticks do
perl v5.12.5 Last change: 2012-11-03 16
Perl Programmers Reference Guide PERLFAQ8(1)
not.
How can I call backticks without shell processing?
This is a bit tricky. You can't simply write the command
like this:
@ok = `grep @opts '$search_string' @filenames`;
As of Perl 5.8.0, you can use "open()" with multiple
arguments. Just like the list forms of "system()" and
"exec()", no shell escapes happen.
open( GREP, "-|", 'grep', @opts, $search_string, @filenames );
chomp(@ok = <GREP>);
close GREP;
You can also:
my @ok = ();
if (open(GREP, "-|")) {
while (<GREP>) {
chomp;
push(@ok, $_);
}
close GREP;
} else {
exec 'grep', @opts, $search_string, @filenames;
}
Just as with "system()", no shell escapes happen when you
"exec()" a list. Further examples of this can be found in
"Safe Pipe Opens" in perlipc.
Note that if you're using Windows, no solution to this
vexing issue is even possible. Even if Perl were to emulate
"fork()", you'd still be stuck, because Windows does not
have an argc/argv-style API.
Why can't my script read from STDIN after I gave it EOF (^D on
Unix, ^Z on MS-DOS)?
This happens only if your perl is compiled to use stdio
instead of perlio, which is the default. Some (maybe all?)
stdios set error and eof flags that you may need to clear.
The "POSIX" module defines "clearerr()" that you can use.
That is the technically correct way to do it. Here are some
less reliable workarounds:
1. Try keeping around the seekpointer and go there, like
this:
$where = tell(LOG);
seek(LOG, $where, 0);
perl v5.12.5 Last change: 2012-11-03 17
Perl Programmers Reference Guide PERLFAQ8(1)
2. If that doesn't work, try seeking to a different part of
the file and then back.
3. If that doesn't work, try seeking to a different part of
the file, reading something, and then seeking back.
4. If that doesn't work, give up on your stdio package and
use sysread.
How can I convert my shell script to perl?
Learn Perl and rewrite it. Seriously, there's no simple
converter. Things that are awkward to do in the shell are
easy to do in Perl, and this very awkwardness is what would
make a shell->perl converter nigh-on impossible to write.
By rewriting it, you'll think about what you're really
trying to do, and hopefully will escape the shell's pipeline
datastream paradigm, which while convenient for some
matters, causes many inefficiencies.
Can I use perl to run a telnet or ftp session?
Try the "Net::FTP", "TCP::Client", and "Net::Telnet" modules
(available from CPAN).
http://www.cpan.org/scripts/netstuff/telnet.emul.shar will
also help for emulating the telnet protocol, but
"Net::Telnet" is quite probably easier to use.
If all you want to do is pretend to be telnet but don't need
the initial telnet handshaking, then the standard dual-
process approach will suffice:
use IO::Socket; # new in 5.004
$handle = IO::Socket::INET->new('www.perl.com:80')
or die "can't connect to port 80 on www.perl.com: $!";
$handle->autoflush(1);
if (fork()) { # XXX: undef means failure
select($handle);
print while <STDIN>; # everything from stdin to socket
} else {
print while <$handle>; # everything from socket to stdout
}
close $handle;
exit;
How can I write expect in Perl?
Once upon a time, there was a library called chat2.pl (part
of the standard perl distribution), which never really got
finished. If you find it somewhere, don't use it. These
days, your best bet is to look at the Expect module
available from CPAN, which also requires two other modules
from CPAN, "IO::Pty" and "IO::Stty".
perl v5.12.5 Last change: 2012-11-03 18
Perl Programmers Reference Guide PERLFAQ8(1)
Is there a way to hide perl's command line from programs such
as "ps"?
First of all note that if you're doing this for security
reasons (to avoid people seeing passwords, for example) then
you should rewrite your program so that critical information
is never given as an argument. Hiding the arguments won't
make your program completely secure.
To actually alter the visible command line, you can assign
to the variable $0 as documented in perlvar. This won't
work on all operating systems, though. Daemon programs like
sendmail place their state there, as in:
$0 = "orcus [accepting connections]";
I {changed directory, modified my environment} in a perl
script. How come the change disappeared when I exited the
script? How do I get my changes to be visible?
Unix
In the strictest sense, it can't be done--the script
executes as a different process from the shell it was
started from. Changes to a process are not reflected in
its parent--only in any children created after the
change. There is shell magic that may allow you to fake
it by "eval()"ing the script's output in your shell;
check out the comp.unix.questions FAQ for details.
How do I close a process's filehandle without waiting for it to
complete?
Assuming your system supports such things, just send an
appropriate signal to the process (see "kill" in perlfunc).
It's common to first send a TERM signal, wait a little bit,
and then send a KILL signal to finish it off.
How do I fork a daemon process?
If by daemon process you mean one that's detached
(disassociated from its tty), then the following process is
reported to work on most Unixish systems. Non-Unix users
should check their Your_OS::Process module for other
solutions.
o Open /dev/tty and use the TIOCNOTTY ioctl on it. See
tty for details. Or better yet, you can just use the
"POSIX::setsid()" function, so you don't have to worry
about process groups.
o Change directory to /
o Reopen STDIN, STDOUT, and STDERR so they're not
connected to the old tty.
o Background yourself like this:
perl v5.12.5 Last change: 2012-11-03 19
Perl Programmers Reference Guide PERLFAQ8(1)
fork && exit;
The "Proc::Daemon" module, available from CPAN, provides a
function to perform these actions for you.
How do I find out if I'm running interactively or not?
(contributed by brian d foy)
This is a difficult question to answer, and the best answer
is only a guess.
What do you really want to know? If you merely want to know
if one of your filehandles is connected to a terminal, you
can try the "-t" file test:
if( -t STDOUT ) {
print "I'm connected to a terminal!\n";
}
However, you might be out of luck if you expect that means
there is a real person on the other side. With the "Expect"
module, another program can pretend to be a person. The
program might even come close to passing the Turing test.
The "IO::Interactive" module does the best it can to give
you an answer. Its "is_interactive" function returns an
output filehandle; that filehandle points to standard output
if the module thinks the session is interactive. Otherwise,
the filehandle is a null handle that simply discards the
output:
use IO::Interactive;
print { is_interactive } "I might go to standard output!\n";
This still doesn't guarantee that a real person is answering
your prompts or reading your output.
If you want to know how to handle automated testing for your
distribution, you can check the environment. The CPAN
Testers, for instance, set the value of "AUTOMATED_TESTING":
unless( $ENV{AUTOMATED_TESTING} ) {
print "Hello interactive tester!\n";
}
How do I timeout a slow event?
Use the "alarm()" function, probably in conjunction with a
signal handler, as documented in "Signals" in perlipc and
the section on "Signals" in the Camel. You may instead use
the more flexible "Sys::AlarmCall" module available from
CPAN.
perl v5.12.5 Last change: 2012-11-03 20
Perl Programmers Reference Guide PERLFAQ8(1)
The "alarm()" function is not implemented on all versions of
Windows. Check the documentation for your specific version
of Perl.
How do I set CPU limits?
(contributed by Xho)
Use the "BSD::Resource" module from CPAN. As an example:
use BSD::Resource;
setrlimit(RLIMIT_CPU,10,20) or die $!;
This sets the soft and hard limits to 10 and 20 seconds,
respectively. After 10 seconds of time spent running on the
CPU (not "wall" time), the process will be sent a signal
(XCPU on some systems) which, if not trapped, will cause the
process to terminate. If that signal is trapped, then after
10 more seconds (20 seconds in total) the process will be
killed with a non-trappable signal.
See the "BSD::Resource" and your systems documentation for
the gory details.
How do I avoid zombies on a Unix system?
Use the reaper code from "Signals" in perlipc to call
"wait()" when a SIGCHLD is received, or else use the double-
fork technique described in "How do I start a process in the
background?" in perlfaq8.
How do I use an SQL database?
The "DBI" module provides an abstract interface to most
database servers and types, including Oracle, DB2, Sybase,
mysql, Postgresql, ODBC, and flat files. The DBI module
accesses each database type through a database driver, or
DBD. You can see a complete list of available drivers on
CPAN: http://www.cpan.org/modules/by-module/DBD/ . You can
read more about DBI on http://dbi.perl.org .
Other modules provide more specific access: "Win32::ODBC",
"Alzabo", "iodbc", and others found on CPAN Search:
http://search.cpan.org .
How do I make a system() exit on control-C?
You can't. You need to imitate the "system()" call (see
perlipc for sample code) and then have a signal handler for
the INT signal that passes the signal on to the subprocess.
Or you can check for it:
$rc = system($cmd);
if ($rc & 127) { die "signal death" }
perl v5.12.5 Last change: 2012-11-03 21
Perl Programmers Reference Guide PERLFAQ8(1)
How do I open a file without blocking?
If you're lucky enough to be using a system that supports
non-blocking reads (most Unixish systems do), you need only
to use the "O_NDELAY" or "O_NONBLOCK" flag from the "Fcntl"
module in conjunction with "sysopen()":
use Fcntl;
sysopen(FH, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
or die "can't open /foo/somefile: $!":
How do I tell the difference between errors from the shell and
perl?
(answer contributed by brian d foy)
When you run a Perl script, something else is running the
script for you, and that something else may output error
messages. The script might emit its own warnings and error
messages. Most of the time you cannot tell who said what.
You probably cannot fix the thing that runs perl, but you
can change how perl outputs its warnings by defining a
custom warning and die functions.
Consider this script, which has an error you may not notice
immediately.
#!/usr/locl/bin/perl
print "Hello World\n";
I get an error when I run this from my shell (which happens
to be bash). That may look like perl forgot it has a
"print()" function, but my shebang line is not the path to
perl, so the shell runs the script, and I get the error.
$ ./test
./test: line 3: print: command not found
A quick and dirty fix involves a little bit of code, but
this may be all you need to figure out the problem.
#!/usr/bin/perl -w
BEGIN {
$SIG{__WARN__} = sub{ print STDERR "Perl: ", @_; };
$SIG{__DIE__} = sub{ print STDERR "Perl: ", @_; exit 1};
}
$a = 1 + undef;
$x / 0;
__END__
perl v5.12.5 Last change: 2012-11-03 22
Perl Programmers Reference Guide PERLFAQ8(1)
The perl message comes out with "Perl" in front. The
"BEGIN" block works at compile time so all of the
compilation errors and warnings get the "Perl:" prefix too.
Perl: Useless use of division (/) in void context at ./test line 9.
Perl: Name "main::a" used only once: possible typo at ./test line 8.
Perl: Name "main::x" used only once: possible typo at ./test line 9.
Perl: Use of uninitialized value in addition (+) at ./test line 8.
Perl: Use of uninitialized value in division (/) at ./test line 9.
Perl: Illegal division by zero at ./test line 9.
Perl: Illegal division by zero at -e line 3.
If I don't see that "Perl:", it's not from perl.
You could also just know all the perl errors, and although
there are some people who may know all of them, you probably
don't. However, they all should be in the perldiag manpage.
If you don't find the error in there, it probably isn't a
perl error.
Looking up every message is not the easiest way, so let perl
to do it for you. Use the diagnostics pragma with turns
perl's normal messages into longer discussions on the topic.
use diagnostics;
If you don't get a paragraph or two of expanded discussion,
it might not be perl's message.
How do I install a module from CPAN?
(contributed by brian d foy)
The easiest way is to have a module also named CPAN do it
for you by using the "cpan" command the comes with Perl. You
can give it a list of modules to install:
$ cpan IO::Interactive Getopt::Whatever
If you prefer "CPANPLUS", it's just as easy:
$ cpanp i IO::Interactive Getopt::Whatever
If you want to install a distribution from the current
directory, you can tell "CPAN.pm" to install "." (the full
stop):
$ cpan .
See the documentation for either of those commands to see
what else you can do.
perl v5.12.5 Last change: 2012-11-03 23
Perl Programmers Reference Guide PERLFAQ8(1)
If you want to try to install a distribution by yourself,
resolving all dependencies on your own, you follow one of
two possible build paths.
For distributions that use Makefile.PL:
$ perl Makefile.PL
$ make test install
For distributions that use Build.PL:
$ perl Build.PL
$ ./Build test
$ ./Build install
Some distributions may need to link to libraries or other
third-party code and their build and installation sequences
may be more complicated. Check any README or INSTALL files
that you may find.
What's the difference between require and use?
(contributed by brian d foy)
Perl runs "require" statement at run-time. Once Perl loads,
compiles, and runs the file, it doesn't do anything else.
The "use" statement is the same as a "require" run at
compile-time, but Perl also calls the "import" method for
the loaded package. These two are the same:
use MODULE qw(import list);
BEGIN {
require MODULE;
MODULE->import(import list);
}
However, you can suppress the "import" by using an explicit,
empty import list. Both of these still happen at compile-
time:
use MODULE ();
BEGIN {
require MODULE;
}
Since "use" will also call the "import" method, the actual
value for "MODULE" must be a bareword. That is, "use" cannot
load files by name, although "require" can:
require "$ENV{HOME}/lib/Foo.pm"; # no @INC searching!
perl v5.12.5 Last change: 2012-11-03 24
Perl Programmers Reference Guide PERLFAQ8(1)
See the entry for "use" in perlfunc for more details.
How do I keep my own module/library directory?
When you build modules, tell Perl where to install the
modules.
If you want to install modules for your own use, the easiest
way might be "local::lib", which you can download from CPAN.
It sets various installation settings for you, and uses
those same settings within your programs.
If you want more flexibility, you need to configure your
CPAN client for your particular situation.
For "Makefile.PL"-based distributions, use the INSTALL_BASE
option when generating Makefiles:
perl Makefile.PL INSTALL_BASE=/mydir/perl
You can set this in your "CPAN.pm" configuration so modules
automatically install in your private library directory when
you use the CPAN.pm shell:
% cpan
cpan> o conf makepl_arg INSTALL_BASE=/mydir/perl
cpan> o conf commit
For "Build.PL"-based distributions, use the --install_base
option:
perl Build.PL --install_base /mydir/perl
You can configure "CPAN.pm" to automatically use this option
too:
% cpan
cpan> o conf mbuild_arg "--install_base /mydir/perl"
cpan> o conf commit
INSTALL_BASE tells these tools to put your modules into
/mydir/perl/lib/perl5. See "How do I add a directory to my
include path (@INC) at runtime?" for details on how to run
your newly installed modules.
There is one caveat with INSTALL_BASE, though, since it acts
differently than the PREFIX and LIB settings that older
versions of "ExtUtils::MakeMaker" advocated. INSTALL_BASE
does not support installing modules for multiple versions of
Perl or different architectures under the same directory.
You should consider if you really want that , and if you do,
use the older PREFIX and LIB settings. See the
"ExtUtils::Makemaker" documentation for more details.
perl v5.12.5 Last change: 2012-11-03 25
Perl Programmers Reference Guide PERLFAQ8(1)
How do I add the directory my program lives in to the
module/library search path?
(contributed by brian d foy)
If you know the directory already, you can add it to @INC as
you would for any other directory. You might <use lib> if
you know the directory at compile time:
use lib $directory;
The trick in this task is to find the directory. Before your
script does anything else (such as a "chdir"), you can get
the current working directory with the "Cwd" module, which
comes with Perl:
BEGIN {
use Cwd;
our $directory = cwd;
}
use lib $directory;
You can do a similar thing with the value of $0, which holds
the script name. That might hold a relative path, but
"rel2abs" can turn it into an absolute path. Once you have
the
BEGIN {
use File::Spec::Functions qw(rel2abs);
use File::Basename qw(dirname);
my $path = rel2abs( $0 );
our $directory = dirname( $path );
}
use lib $directory;
The "FindBin" module, which comes with Perl, might work. It
finds the directory of the currently running script and puts
it in $Bin, which you can then use to construct the right
library path:
use FindBin qw($Bin);
You can also use "local::lib" to do much of the same thing.
Install modules using "local::lib"'s settings then use the
module in your program:
use local::lib; # sets up a local lib at ~/perl5
See the "local::lib" documentation for more details.
perl v5.12.5 Last change: 2012-11-03 26
Perl Programmers Reference Guide PERLFAQ8(1)
How do I add a directory to my include path (@INC) at runtime?
Here are the suggested ways of modifying your include path,
including environment variables, run-time switches, and in-
code statements:
the "PERLLIB" environment variable
$ export PERLLIB=/path/to/my/dir
$ perl program.pl
the "PERL5LIB" environment variable
$ export PERL5LIB=/path/to/my/dir
$ perl program.pl
the "perl -Idir" command line flag
$ perl -I/path/to/my/dir program.pl
the "lib" pragma:
use lib "$ENV{HOME}/myown_perllib";
the "local::lib" module:
use local::lib;
use local::lib "~/myown_perllib";
The last is particularly useful because it knows about
machine dependent architectures. The "lib.pm" pragmatic
module was first included with the 5.002 release of Perl.
What is socket.ph and where do I get it?
It's a Perl 4 style file defining values for system
networking constants. Sometimes it is built using "h2ph"
when Perl is installed, but other times it is not. Modern
programs "use Socket;" instead.
AUTHOR AND COPYRIGHT
Copyright (c) 1997-2010 Tom Christiansen, Nathan Torkington,
and other authors as noted. All rights reserved.
This documentation is free; you can redistribute it and/or
modify it under the same terms as Perl itself.
Irrespective of its distribution, all code examples in this
file are hereby placed into the public domain. You are
permitted and encouraged to use this code in your own
programs for fun or for profit as you see fit. A simple
comment in the code giving credit would be courteous but is
not required.
perl v5.12.5 Last change: 2012-11-03 27
Perl Programmers Reference Guide PERLFAQ8(1)
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/perl-512 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://www.cpan.org/src/5.0/perl-5.12.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.perl.org/.
perl v5.12.5 Last change: 2012-11-03 28