perlmodinstall
(1)
Name
perlmodinstall - Installing CPAN Modules
Synopsis
Please see following description for synopsis
Description
Perl Programmers Reference Guide PERLMODINSTALL(1)
NAME
perlmodinstall - Installing CPAN Modules
DESCRIPTION
You can think of a module as the fundamental unit of
reusable Perl code; see perlmod for details. Whenever
anyone creates a chunk of Perl code that they think will be
useful to the world, they register as a Perl developer at
http://www.cpan.org/modules/04pause.html so that they can
then upload their code to the CPAN. The CPAN is the
Comprehensive Perl Archive Network and can be accessed at
http://www.cpan.org/ , and searched at
http://search.cpan.org/ .
This documentation is for people who want to download CPAN
modules and install them on their own computer.
PREAMBLE
First, are you sure that the module isn't already on your
system? Try "perl -MFoo -e 1". (Replace "Foo" with the
name of the module; for instance, "perl -MCGI::Carp -e 1".
If you don't see an error message, you have the module. (If
you do see an error message, it's still possible you have
the module, but that it's not in your path, which you can
display with "perl -e "print qq(@INC)"".) For the remainder
of this document, we'll assume that you really honestly
truly lack an installed module, but have found it on the
CPAN.
So now you have a file ending in .tar.gz (or, less often,
.zip). You know there's a tasty module inside. There are
four steps you must now take:
DECOMPRESS the file
UNPACK the file into a directory
BUILD the module (sometimes unnecessary)
INSTALL the module.
Here's how to perform each step for each operating system.
This is <not> a substitute for reading the README and
INSTALL files that might have come with your module!
Also note that these instructions are tailored for
installing the module into your system's repository of Perl
modules, but you can install modules into any directory you
wish. For instance, where I say "perl Makefile.PL", you can
substitute "perl Makefile.PL PREFIX=/my/perl_directory" to
install the modules into "/my/perl_directory". Then you can
use the modules from your Perl programs with "use lib
"/my/perl_directory/lib/site_perl";" or sometimes just "use
"/my/perl_directory";". If you're on a system that requires
perl v5.12.5 Last change: 2012-11-03 1
Perl Programmers Reference Guide PERLMODINSTALL(1)
superuser/root access to install modules into the
directories you see when you type "perl -e "print
qq(@INC)"", you'll want to install them into a local
directory (such as your home directory) and use this
approach.
o If you're on a Unix or Unix-like system,
You can use Andreas Koenig's CPAN module (
http://www.cpan.org/modules/by-module/CPAN ) to automate
the following steps, from DECOMPRESS through INSTALL.
A. DECOMPRESS
Decompress the file with "gzip -d yourmodule.tar.gz"
You can get gzip from ftp://prep.ai.mit.edu/pub/gnu/
Or, you can combine this step with the next to save disk
space:
gzip -dc yourmodule.tar.gz | tar -xof -
B. UNPACK
Unpack the result with "tar -xof yourmodule.tar"
C. BUILD
Go into the newly-created directory and type:
perl Makefile.PL
make test
or
perl Makefile.PL PREFIX=/my/perl_directory
to install it locally. (Remember that if you do this,
you'll have to put "use lib "/my/perl_directory";" near
the top of the program that is to use this module.
D. INSTALL
While still in that directory, type:
make install
Make sure you have the appropriate permissions to
install the module in your Perl 5 library directory.
Often, you'll need to be root.
perl v5.12.5 Last change: 2012-11-03 2
Perl Programmers Reference Guide PERLMODINSTALL(1)
That's all you need to do on Unix systems with dynamic
linking. Most Unix systems have dynamic linking. If
yours doesn't, or if for another reason you have a
statically-linked perl, and the module requires
compilation, you'll need to build a new Perl binary that
includes the module. Again, you'll probably need to be
root.
o If you're running ActivePerl (Win95/98/2K/NT/XP, Linux,
Solaris)
First, type "ppm" from a shell and see whether
ActiveState's PPM repository has your module. If so,
you can install it with "ppm" and you won't have to
bother with any of the other steps here. You might be
able to use the CPAN instructions from the "Unix or
Linux" section above as well; give it a try. Otherwise,
you'll have to follow the steps below.
A. DECOMPRESS
You can use the shareware Winzip ( http://www.winzip.com
) to decompress and unpack modules.
B. UNPACK
If you used WinZip, this was already done for you.
C. BUILD
You'll need the "nmake" utility, available at
http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe
or dmake, available on CPAN.
http://search.cpan.org/dist/dmake/
Does the module require compilation (i.e. does it have
files that end in .xs, .c, .h, .y, .cc, .cxx, or .C)?
If it does, life is now officially tough for you,
because you have to compile the module yourself (no easy
feat on Windows). You'll need a compiler such as Visual
C++. Alternatively, you can download a pre-built PPM
package from ActiveState.
http://aspn.activestate.com/ASPN/Downloads/ActivePerl/PPM/
Go into the newly-created directory and type:
perl Makefile.PL
nmake test
D. INSTALL
perl v5.12.5 Last change: 2012-11-03 3
Perl Programmers Reference Guide PERLMODINSTALL(1)
While still in that directory, type:
nmake install
o If you're using a Macintosh with "Classic" MacOS and
MacPerl,
A. DECOMPRESS
First, make sure you have the latest cpan-mac
distribution ( http://www.cpan.org/authors/id/CNANDOR/
), which has utilities for doing all of the steps. Read
the cpan-mac directions carefully and install it. If
you choose not to use cpan-mac for some reason, there
are alternatives listed here.
After installing cpan-mac, drop the module archive on
the untarzipme droplet, which will decompress and unpack
for you.
Or, you can either use the shareware StuffIt Expander
program ( http://my.smithmicro.com/mac/stuffit/ ) or the
freeware MacGzip program (
http://persephone.cps.unizar.es/general/gente/spd/gzip/gzip.html
).
B. UNPACK
If you're using untarzipme or StuffIt, the archive
should be extracted now. Or, you can use the freeware
suntar or Tar (
http://hyperarchive.lcs.mit.edu/HyperArchive/Archive/cmp/
).
C. BUILD
Check the contents of the distribution. Read the
module's documentation, looking for reasons why you
might have trouble using it with MacPerl. Look for .xs
and .c files, which normally denote that the
distribution must be compiled, and you cannot install it
"out of the box." (See "PORTABILITY".)
D. INSTALL
If you are using cpan-mac, just drop the folder on the
installme droplet, and use the module.
Or, if you aren't using cpan-mac, do some manual labor.
Make sure the newlines for the modules are in Mac
format, not Unix format. If they are not then you might
perl v5.12.5 Last change: 2012-11-03 4
Perl Programmers Reference Guide PERLMODINSTALL(1)
have decompressed them incorrectly. Check your
decompression and unpacking utilities settings to make
sure they are translating text files properly.
As a last resort, you can use the perl one-liner:
perl -i.bak -pe 's/(?:\015)?\012/\015/g' <filenames>
on the source files.
Then move the files (probably just the .pm files, though
there may be some additional ones, too; check the module
documentation) to their final destination: This will
most likely be in "$ENV{MACPERL}site_lib:" (i.e.,
"HD:MacPerl folder:site_lib:"). You can add new paths
to the default @INC in the Preferences menu item in the
MacPerl application ("$ENV{MACPERL}site_lib:" is added
automagically). Create whatever directory structures
are required (i.e., for "Some::Module", create
"$ENV{MACPERL}site_lib:Some:" and put "Module.pm" in
that directory).
Then run the following script (or something like it):
#!perl -w
use AutoSplit;
my $dir = "${MACPERL}site_perl";
autosplit("$dir:Some:Module.pm", "$dir:auto", 0, 1, 1);
o If you're on the DJGPP port of DOS,
A. DECOMPRESS
djtarx ( ftp://ftp.delorie.com/pub/djgpp/current/v2/ )
will both uncompress and unpack.
B. UNPACK
See above.
C. BUILD
Go into the newly-created directory and type:
perl Makefile.PL
make test
You will need the packages mentioned in README.dos in
the Perl distribution.
D. INSTALL
perl v5.12.5 Last change: 2012-11-03 5
Perl Programmers Reference Guide PERLMODINSTALL(1)
While still in that directory, type:
make install
You will need the packages mentioned in README.dos in
the Perl distribution.
o If you're on OS/2,
Get the EMX development suite and gzip/tar, from either
Hobbes ( http://hobbes.nmsu.edu ) or Leo (
http://www.leo.org ), and then follow the instructions
for Unix.
o If you're on VMS,
When downloading from CPAN, save your file with a ".tgz"
extension instead of ".tar.gz". All other periods in
the filename should be replaced with underscores. For
example, "Your-Module-1.33.tar.gz" should be downloaded
as "Your-Module-1_33.tgz".
A. DECOMPRESS
Type
gzip -d Your-Module.tgz
or, for zipped modules, type
unzip Your-Module.zip
Executables for gzip, zip, and VMStar:
http://www.hp.com/go/openvms/freeware/
and their source code:
http://www.fsf.org/order/ftp.html
Note that GNU's gzip/gunzip is not the same as Info-
ZIP's zip/unzip package. The former is a simple
compression tool; the latter permits creation of multi-
file archives.
B. UNPACK
If you're using VMStar:
VMStar xf Your-Module.tar
Or, if you're fond of VMS command syntax:
perl v5.12.5 Last change: 2012-11-03 6
Perl Programmers Reference Guide PERLMODINSTALL(1)
tar/extract/verbose Your_Module.tar
C. BUILD
Make sure you have MMS (from Digital) or the freeware
MMK ( available from MadGoat at http://www.madgoat.com
). Then type this to create the DESCRIP.MMS for the
module:
perl Makefile.PL
Now you're ready to build:
mms test
Substitute "mmk" for "mms" above if you're using MMK.
D. INSTALL
Type
mms install
Substitute "mmk" for "mms" above if you're using MMK.
o If you're on MVS,
Introduce the .tar.gz file into an HFS as binary; don't
translate from ASCII to EBCDIC.
A. DECOMPRESS
Decompress the file with "gzip -d yourmodule.tar.gz"
You can get gzip from
http://www.s390.ibm.com/products/oe/bpxqp1.html
B. UNPACK
Unpack the result with
pax -o to=IBM-1047,from=ISO8859-1 -r < yourmodule.tar
The BUILD and INSTALL steps are identical to those for
Unix. Some modules generate Makefiles that work better
with GNU make, which is available from
http://www.mks.com/s390/gnu/
PORTABILITY
Note that not all modules will work with on all platforms.
See perlport for more information on portability issues.
Read the documentation to see if the module will work on
perl v5.12.5 Last change: 2012-11-03 7
Perl Programmers Reference Guide PERLMODINSTALL(1)
your system. There are basically three categories of
modules that will not work "out of the box" with all
platforms (with some possibility of overlap):
o Those that should, but don't. These need to be fixed;
consider contacting the author and possibly writing a
patch.
o Those that need to be compiled, where the target
platform doesn't have compilers readily available.
(These modules contain .xs or .c files, usually.) You
might be able to find existing binaries on the CPAN or
elsewhere, or you might want to try getting compilers
and building it yourself, and then release the binary
for other poor souls to use.
o Those that are targeted at a specific platform. (Such
as the Win32:: modules.) If the module is targeted
specifically at a platform other than yours, you're out
of luck, most likely.
Check the CPAN Testers if a module should work with your
platform but it doesn't behave as you'd expect, or you
aren't sure whether or not a module will work under your
platform. If the module you want isn't listed there, you
can test it yourself and let CPAN Testers know, you can join
CPAN Testers, or you can request it be tested.
http://testers.cpan.org/
HEY
If you have any suggested changes for this page, let me
know. Please don't send me mail asking for help on how to
install your modules. There are too many modules, and too
few Orwants, for me to be able to answer or even acknowledge
all your questions. Contact the module author instead, or
post to comp.lang.perl.modules, or ask someone familiar with
Perl on your operating system.
AUTHOR
Jon Orwant
[email protected]
with invaluable help from Chris Nandor, and valuable help
from Brandon Allbery, Charles Bailey, Graham Barr, Dominic
Dunlop, Jarkko Hietaniemi, Ben Holzman, Tom Horsley, Nick
Ing-Simmons, Tuomas J. Lukka, Laszlo Molnar, Alan Olsen,
Peter Prymmer, Gurusamy Sarathy, Christoph Spalinger, Dan
Sugalski, Larry Virden, and Ilya Zakharevich.
perl v5.12.5 Last change: 2012-11-03 8
Perl Programmers Reference Guide PERLMODINSTALL(1)
First version July 22, 1998; last revised November 21, 2001.
COPYRIGHT
Copyright (C) 1998, 2002, 2003 Jon Orwant. All Rights
Reserved.
Permission is granted to make and distribute verbatim copies
of this documentation provided the copyright notice and this
permission notice are preserved on all copies.
Permission is granted to copy and distribute modified
versions of this documentation under the conditions for
verbatim copying, provided also that they are marked clearly
as modified versions, that the authors' names and title are
unchanged (though subtitles and additional authors' names
may be added), and that the entire resulting derived work is
distributed under the terms of a permission notice identical
to this one.
Permission is granted to copy and distribute translations of
this documentation into another language, under the above
conditions for modified versions.
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/perl-512 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://www.cpan.org/src/5.0/perl-5.12.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.perl.org/.
perl v5.12.5 Last change: 2012-11-03 9