lftp
(1)
Name
lftp - Sophisticated file transfer program
Synopsis
Please see following description for synopsis
Description
User Commands lftp(1)
NAME
lftp - Sophisticated file transfer program
SYNTAX
lftp [-d] [-e cmd] [-p port] [-u user[,pass]] [site]
lftp -f script_file
lftp -c commands
lftp --version
lftp --help
VERSION
This man page documents lftp version 4.3.0.
DESCRIPTION
lftp is a file transfer program that allows sophisticated
ftp, http and other connections to other hosts. If site is
specified then lftp will connect to that site otherwise a
connection has to be established with the open command.
lftp can handle several file access methods - ftp, ftps,
http, https, hftp, fish, sftp and file. You can specify the
method to use in `open URL' command, e.g. `open
http://www.us.kernel.org/pub/linux'. hftp is ftp-over-http-
proxy protocol. It can be used automatically instead of ftp
if ftp:proxy is set to `http://proxy[:port]'. Fish is a pro-
tocol working over an ssh connection to a unix account. SFtp
is a protocol implemented in ssh2 as sftp subsystem.
Besides FTP-like protocols, lftp has support for BitTorrent
protocol as `torrent' command. Seeding is also supported.
Every operation in lftp is reliable, that is any not fatal
error is ignored and the operation is repeated. So if down-
loading breaks, it will be restarted from the point automat-
ically. Even if ftp server does not support REST command,
lftp will try to retrieve the file from the very beginning
until the file is transferred completely.
lftp has shell-like command syntax allowing you to launch
several commands in parallel in background (&). It is also
possible to group commands within () and execute them in
background. All background jobs are executed in the same
single process. You can bring a foreground job to background
with ^Z (c-z) and back with command `wait' (or `fg' which is
alias to `wait'). To list running jobs, use command `jobs'.
Some commands allow redirecting their output (cat, ls, ...)
to file or via pipe to external command. Commands can be
executed conditionally based on termination status of previ-
ous command (&&, ||).
SunOS 5.11 Last change: 16 Jun 2011 1
User Commands lftp(1)
If you exit lftp when some jobs are not finished yet, lftp
will move itself to nohup mode in background. The same hap-
pens when you have a real modem hangup or when you close an
xterm.
lftp has builtin mirror which can download or update a whole
directory tree. There is also reverse mirror (mirror -R)
which uploads or updates a directory tree on server. Mirror
can also synchronize directories between two remote servers,
using FXP if available.
There is command `at' to launch a job at specified time in
current context, command `queue' to queue commands for
sequential execution for current server, and much more.
On startup, lftp executes /etc/lftp.conf and then ~/.lftprc
and ~/.lftp/rc. You can place aliases and `set' commands
there. Some people prefer to see full protocol debug, use
`debug' to turn the debug on. Use `debug 3' to see only
greeting messages and error messages.
lftp has a number of settable variables. You can use `set
-a' to see all variables and their values or `set -d' to see
list of defaults. Variable names can be abbreviated and
prefix can be omitted unless the rest becomes ambiguous.
If lftp was compiled with OpenSSL (configure
--with-openssl), then it includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
Commands
! shell command
Launch shell or shell command.
!ls
To do a directory listing of the local host.
alias [name [value]]
Define or undefine alias name. If value is omitted, the
alias is undefined, else it takes the value value. If no
argument is given the current aliases are listed.
alias dir ls -lF
alias less zmore
at time [ -- command ]
SunOS 5.11 Last change: 16 Jun 2011 2
User Commands lftp(1)
Wait until the given time and execute given (optional) com-
mand. See also at(1).
attach [PID]
Attach the terminal to specified backgrounded lftp process.
bookmark [subcommand]
The bookmark command controls bookmarks.
add <name> [<loc>] add current place or given
location to bookmarks and bind
to given name
del <name> remove bookmark with name
edit start editor on bookmarks file
import <type> import foreign bookmarks
list list bookmarks (default)
cache [subcommand]
The cache command controls local memory cache. The follow-
ing subcommands are recognized:
stat print cache status (default)
on|off turn on/off caching
flush flush cache
size lim set memory limit, -1 means unlimited
expire Nx set cache expiration time to N sec-
onds (x=s) minutes (x=m) hours (x=h)
or days (x=d)
cat files
cat outputs the remote file(s) to stdout. (See also more,
zcat and zmore)
cd rdir
Change current remote directory. The previous remote direc-
tory is stored as `-'. You can do `cd -' to change the
directory back. The previous directory for each site is
also stored on disk, so you can do `open site; cd -' even
after lftp restart.
chmod mode files
Change permission mask on remote files. The mode must be an
octal number.
close [-a]
Close idle connections. By default only with the current
server, use -a to close all idle connections.
SunOS 5.11 Last change: 16 Jun 2011 3
User Commands lftp(1)
cls [OPTS] files...
`cls' tries to retrieve information about specified files or
directories and outputs the information according to format
options. The difference between `ls' and `cls' is that `ls'
requests the server to format file listing, and `cls' for-
mats it itself, after retrieving all the needed information.
See `help cls' for options.
command cmd args...
execute given command ignoring aliases.
debug [-o file] level|off
Switch debugging to level or turn it off. Use -o to redi-
rect the debug output to a file.
echo [-n] string
guess what it does.
eval [-f format ] args...
without -f it just executes given arguments as a command.
With -f, arguments are transformed into a new command. The
format can contain plain text and placeholders $0...$9 and
$@, corresponding to the arguments.
exit [bg] [top] [kill] [code]
exit will exit from lftp or move to background if there are
active jobs. If no job is active, code is passed to operat-
ing system as lftp's termination status. If code is omitted,
the exit code of last command is used.
`exit bg' forces moving to background when cmd:move-back-
ground is false. `exit top' makes top level `shell' (inter-
nal lftp command executor) terminate. `exit kill' kills all
numbered jobs before exiting. The options can be combined,
e.g. `at 08:00 -- exit top kill &' kills all jobs and makes
lftp exit at specified time.
fg
Alias for `wait'.
find [directory]
List files in the directory (current directory by default)
recursively. This can help with servers lacking ls -R sup-
port. You can redirect output of this command.
SunOS 5.11 Last change: 16 Jun 2011 4
User Commands lftp(1)
ftpcopy
Obsolete. Use one of the following instead:
get ftp://... -o ftp://...
get -O ftp://... file1 file2...
put ftp://...
mput ftp://.../*
mget -O ftp://... ftp://.../*
or other combinations to get FXP transfer (directly between
two ftp servers). lftp would fallback to plain copy (via
client) if FXP transfer cannot be initiated or ftp:use-fxp
is false.
get [-E] [-a] [-c] [-O base] rfile [-o lfile] ...
Retrieve the remote file rfile and store it as the local
file lfile. If -o is omitted, the file is stored to local
file named as base name of rfile. You can get multiple files
by specifying multiple instances of rfile (and -o lfile).
Does not expand wildcards, use mget for that.
-c continue, reget
-E delete source files after successful transfer
-a use ascii mode (binary is the default)
-O <base> specifies base directory or URL where files
should be placed
Examples:
get README
get README -o debian.README
get README README.mirrors
get README -o debian.README README.mirrors -o debian.mirrors
get README -o ftp://some.host.org/debian.README
get README -o ftp://some.host.org/debian-dir/ (end slash is important)
get1 [OPTS] rfile
Transfer a single file. Options:
-o <lfile> destination file name (default - base-
name of rfile)
-c continue, reget
-E delete source files after successful
transfer
-a use ascii mode (binary is the default)
--source-region=<from-to> transfer specified region of source
file
--target-position=<pos> position in target file to write data
at
glob [-d] [-a] [-f] command patterns
Glob given patterns containing metacharacters and pass
result to given command. E.g. ``glob echo *''.
SunOS 5.11 Last change: 16 Jun 2011 5
User Commands lftp(1)
-f plain files (default)
-d directories
-a all types
help [cmd]
Print help for cmd or if no cmd was specified print a list
of available commands.
jobs [-v]
List running jobs. -v means verbose, several -v can be spec-
ified.
kill all|job_no
Delete specified job with job_no or all jobs. (For job_no
see jobs)
lcd ldir
Change current local directory ldir. The previous local
directory is stored as `-'. You can do `lcd -' to change the
directory back.
ln [-s] existing-file new-link
Make a hard/symbolic link to an existing file. Option -s
selects creation of a symbolic link.
local command
Run specified command with local directory file:// session
instead of remote session. Examples:
local pwd
local ls
local mirror /dir1 /dir2
lpwd
Print current working directory on local machine.
ls params
List remote files. You can redirect output of this command
to file or via pipe to external command. By default, ls
output is cached, to see new listing use rels or cache
flush.
mget [-c] [-d] [-a] [-E] [-O base] files
SunOS 5.11 Last change: 16 Jun 2011 6
User Commands lftp(1)
Gets selected files with expanded wildcards.
-c continue, reget.
-d create directories the same as file names and
get the files into them instead of current
directory.
-E delete source files after successful transfer
-a use ascii mode (binary is the default)
-O <base> specifies base directory or URL where files
should be placed
mirror [OPTS] [source [target]]
Mirror specified source directory to local target directory.
If target directory ends with a slash, the source base name
is appended to target directory name. Source and/or target
can be URLs pointing to directories.
-c, --continue continue a mir-
ror job if pos-
sible
-e, --delete delete files not
present at
remote site
--delete-first delete old files
before transfer-
ring new ones
--depth-first descend into
subdirectories
before transfer-
ring files
-s, --allow-suid set suid/sgid
bits according
to remote site
--allow-chown try to set owner
and group on
files
--ascii use ascii mode
transfers
(implies
--ignore-size)
--ignore-time ignore time when
deciding whether
to download
--ignore-size ignore size when
deciding whether
to download
--only-missing download only
missing files
SunOS 5.11 Last change: 16 Jun 2011 7
User Commands lftp(1)
--only-existing download only
files already
existing at tar-
get
-n, --only-newer download only
newer files (-c
won't work)
--no-empty-dirs don't create
empty directo-
ries (implies
--depth-first)
-r, --no-recursion don't go to sub-
directories
--no-symlinks don't create
symbolic links
-p, --no-perms don't set file
permissions
--no-umask don't apply
umask to file
modes
-R, --reverse reverse mirror
(put files)
-L, --dereference download sym-
bolic links as
files
-N, --newer-than=SPEC download only
files newer than
specified time
--on-change=CMD execute the com-
mand if anything
has been changed
--older-than=SPEC download only
files older than
specified time
--size-range=RANGE download only
files with size
in specified
range
-P, --parallel[=N] download N files
in parallel
--use-pget[-n=N] use pget to
transfer every
single file
--loop loop until no
changes found
-i RX, --include RX include matching
files
-x RX, --exclude RX exclude matching
files
-I GP, --include-glob GP include matching
files
SunOS 5.11 Last change: 16 Jun 2011 8
User Commands lftp(1)
-X GP, --exclude-glob GP exclude matching
files
-v, --verbose[=level] verbose opera-
tion
--log=FILE write lftp com-
mands being exe-
cuted to FILE
--script=FILE write lftp com-
mands to FILE,
but don't exe-
cute them
--just-print, --dry-run same as
--script=-
--use-cache use cached
directory list-
ings
--Remove-source-files remove files
after transfer
(use with cau-
tion)
-a same as --allow-
chown --allow-
suid --no-umask
When using -R, the first directory is local and the second
is remote. If the second directory is omitted, base name of
first directory is used. If both directories are omitted,
current local and remote directories are used. If target
directory ends with a slash (except root directory) then
base name of source directory is appended.
RX is an extended regular expression, just like in egrep(1).
GP is a glob pattern, e.g. `*.zip'.
Include and exclude options can be specified multiple times.
It means that a file or directory would be mirrored if it
matches an include and does not match to excludes after the
include, or does not match anything and the first check is
exclude. Directories are matched with a slash appended.
Note that symbolic links are not created when uploading to
remote server, because ftp protocol cannot do it. To upload
files the links refer to, use `mirror -RL' command (treat
symbolic links as files).
For option --newer-than you can either specify a file or
time specification like that used by at(1) command, e.g.
`now-7days' or `week ago'. If you specify a file, then modi-
fication time of that file will be used.
SunOS 5.11 Last change: 16 Jun 2011 9
User Commands lftp(1)
Verbosity level can be selected using --verbose=level option
or by several -v options, e.g. -vvv. Levels are:
0 - no output (default)
1 - print actions
2 - +print not deleted file names (when -e is not specified)
3 - +print directory names which are mirrored
--only-newer turns off file size comparison and
uploads/downloads only newer files even if size is differ-
ent. By default older files are transferred and replace
newer ones.
You can mirror between two servers if you specify URLs
instead of directories. FXP is used automatically for
transfers between ftp servers, if possible.
Some ftp servers hide dot-files by default (e.g. .htaccess),
and show them only when LIST command is used with -a option.
In such case try to use `set ftp:list-options -a'.
mkdir [-p] dir(s)
Make remote directories. If -p is used, make all components
of paths.
module module [ args ]
Load given module using dlopen(3) function. If module name
does not contain a slash, it is searched in directories
specified by module:path variable. Arguments are passed to
module_init function. See README.modules for technical
details.
more files
Same as `cat files | more'. if PAGER is set, it is used as
filter. (See also cat, zcat and zmore)
mput [-c] [-d] [-a] [-E] [-O base] files
Upload files with wildcard expansion. By default it uses the
base name of local name as remote one. This can be changed
by `-d' option.
-c continue, reput
-d create directories the same as in file
names and put the files into them
instead of current directory
-E delete source files after successful
transfer (dangerous)
-a use ascii mode (binary is the default)
SunOS 5.11 Last change: 16 Jun 2011 10
User Commands lftp(1)
-O <base> specifies base directory or URL where
files should be placed
mrm file(s)
Same as `glob rm'. Removes specified file(s) with wildcard
expansion.
mv file1 file2
Rename file1 to file2.
nlist [args]
List remote file names
open [-e cmd] [-u user[,pass]] [-p port] host|url
Select an ftp server.
pget [OPTS] rfile [-o lfile]
Gets the specified file using several connections. This can
speed up transfer, but loads the net and server heavily
impacting other users. Use only if you really have to trans-
fer the file ASAP. Options:
-c continue transfer.
Requires lfile.lftp-
pget-status file.
-n maxconn set maximum number of
connections (default
is taken from
pget:default-n set-
ting)
put [-E] [-a] [-c] [-O base] lfile [-o rfile]
Upload lfile with remote name rfile. If -o omitted, the base
name of lfile is used as remote name. Does not expand wild-
cards, use mput for that.
-o <rfile> specifies remote file name (default -
basename of lfile)
-c continue, reput. It requires permis-
sion to overwrite remote files
-E delete source files after successful
transfer (dangerous)
-a use ascii mode (binary is the default)
-O <base> specifies base directory or URL where
files should be placed
pwd [-p]
SunOS 5.11 Last change: 16 Jun 2011 11
User Commands lftp(1)
Print current remote URL. Use `-p' option to show password
in the URL.
queue [-n num ] cmd
Add the given command to queue for sequential execution.
Each site has its own queue. `-n' adds the command before
the given item in the queue. Don't try to queue `cd' or
`lcd' commands, it may confuse lftp. Instead do the cd/lcd
before `queue' command, and it will remember the place in
which the command is to be done. It is possible to queue up
an already running job by `queue wait <jobno>', but the job
will continue execution even if it is not the first in
queue.
`queue stop' will stop the queue, it will not execute any
new commands, but already running jobs will continue to run.
You can use `queue stop' to create an empty stopped queue.
`queue start' will resume queue execution. When you exit
lftp, it will start all stopped queues automatically.
`queue' with no arguments will either create a stopped queue
or print queue status.
queue --delete|-d [index or wildcard expression]
Delete one or more items from the queue. If no argument is
given, the last entry in the queue is deleted.
queue --move|-m <index or wildcard expression> [index]
Move the given items before the given queue index, or to the
end if no destination is given.
-q Be quiet.
-v Be verbose.
-Q Output in a format
that can be used to
re-queue. Useful with
--delete.
Examples:
> get file &
[1] get file
> queue wait 1
> queue get another_file
> cd a_directory
> queue get yet_another_file
queue -d 3 Delete the third item in the queue.
SunOS 5.11 Last change: 16 Jun 2011 12
User Commands lftp(1)
queue -m 6 4 Move the sixth item in the queue
before the fourth.
queue -m "get*zip" 1 Move all commands matching
"get*zip" to the beginning of the
queue. (The order of the items is
preserved.)
queue -d "get*zip" Delete all commands matching
"get*zip".
quote cmd
For FTP - send the command uninterpreted. Use with caution -
it can lead to unknown remote state and thus will cause
reconnect. You cannot be sure that any change of remote
state because of quoted command is solid - it can be reset
by reconnect at any time.
For HTTP - specific to HTTP action. Syntax: ``quote <com-
mand> [<args>]''. Command may be ``set-cookie'' or
``post''.
open http://www.site.net
quote set-cookie "variable=value; othervar=othervalue"
set http:post-content-type application/x-www-form-urlencoded
quote post /cgi-bin/script.cgi "var=value&othervar=othervalue" > local_file
For FISH - send the command uninterpreted. This can be used
to execute arbitrary commands on server. The command must
not take input or print ### at new line beginning. If it
does, the protocol will become out of sync.
open fish://server
quote find -name \*.zip
reget rfile [-o lfile]
Same as `get -c'.
rels [args]
Same as `ls', but ignores the cache.
renlist [args]
Same as `nlist', but ignores the cache.
repeat [OPTS] [[-d] delay] [command]
Repeat specified command with a delay between iterations.
Default delay is one second, default command is empty.
-c <count> maximum number of iterations
-d <delay> delay between iterations
SunOS 5.11 Last change: 16 Jun 2011 13
User Commands lftp(1)
--while-ok stop when command exits with non-zero code
--until-ok stop when command exits with zero code
--weak stop when lftp moves to background.
Examples:
repeat at tomorrow -- mirror
repeat 1d mirror
reput lfile [-o rfile]
Same as `put -c'.
rm [-r] [-f] files
Remove remote files. Does not expand wildcards, use mrm for
that. -r is for recursive directory remove. Be careful, if
something goes wrong you can lose files. -f suppress error
messages.
rmdir dir(s)
Remove remote directories.
scache [session]
List cached sessions or switch to specified session.
set [var [val]]
Set variable to given value. If the value is omitted, unset
the variable. Variable name has format ``name/closure'',
where closure can specify exact application of the setting.
See below for details. If set is called with no variable
then only altered settings are listed. It can be changed by
options:
-a list all settings, including default values
-d list only default values, not necessary current ones
site site_cmd
Execute site command site_cmd and output the result. You
can redirect its output.
sleep interval
Sleep given time interval and exit. Interval is in seconds
by default, but can be suffixed with 'm', 'h', 'd' for min-
utes, hours and days respectively. See also at.
slot [name]
SunOS 5.11 Last change: 16 Jun 2011 14
User Commands lftp(1)
Select specified slot or list all slots allocated. A slot is
a connection to a server, somewhat like a virtual console.
You can create multiple slots connected to different servers
and switch between them. You can also use slot:name as a
pseudo-URL evaluating to that slot location.
Default readline binding allows quick switching between
slots named 0-9 using Meta-0 - Meta-9 keys (often you can
use Alt instead of Meta).
source file
source -e command
Execute commands recorded in file file or returned by speci-
fied external command.
source ~/.lftp/rc
source -e echo help
suspend
Stop lftp process. Note that transfers will be also stopped
until you continue the process with shell's fg or bg com-
mands.
torrent [OPTS] torrent-files...
Start BitTorrent process for the given torrent-files, which
can be a local file or URL. Local wildcards are expanded.
Existing files are first validated unless --force-valid
option is given. Missing pieces are downloaded. Files are
stored in specified directory or current working directory
by default. Seeding continues until ratio reachs tor-
rent:stop-on-ratio setting or time of torrent:seed-max-time
outs.
Options:
-O <directory> specifies base direc-
tory where files
should be placed
--force-valid skip file validation
(if you are sure they
are ok).
user user [pass]
user URL [pass]
Use specified info for remote login. If you specify an URL
with user name, the entered password will be cached so that
future URL references can use it.
version
SunOS 5.11 Last change: 16 Jun 2011 15
User Commands lftp(1)
Print lftp version.
wait [jobno]
wait all
Wait for specified job to terminate. If jobno is omitted,
wait for last backgrounded job.
`wait all' waits for all jobs termination.
zcat files
Same as cat, but filter each file through zcat. (See also
cat, more and zmore)
zmore files
Same as more, but filter each file through zcat. (See also
cat, zcat and more)
Settings
On startup, lftp executes ~/.lftprc and ~/.lftp/rc. You can
place aliases and `set' commands there. Some people prefer
to see full protocol debug, use `debug' to turn the debug
on.
There is also a system-wide startup file in /etc/lftp.conf.
It can be in different directory, see FILES section.
lftp has the following settable variables (you can also use
`set -a' to see all variables and their values):
bmk:save-passwords (boolean)
save plain text passwords in ~/.lftp/bookmarks on
`bookmark add' command. Off by default.
cmd:at-exit (string)
the commands in string are executed before lftp exits.
cmd:csh-history (boolean)
enables csh-like history expansion.
cmd:default-protocol (string)
The value is used when `open' is used with just host
name without protocol. Default is `ftp'.
cmd:fail-exit (boolean)
if true, exit when an unconditional (without || and &&
at begin) command fails.
cmd:interactive (boolean)
SunOS 5.11 Last change: 16 Jun 2011 16
User Commands lftp(1)
when true, lftp acts interactively, handles terminal
signals and outputs some extra messages. Default
depends on stdin being a terminal.
cmd:long-running (seconds)
time of command execution, which is considered as
`long' and a beep is done before next prompt. 0 means
off.
cmd:ls-default (string)
default ls argument
cmd:move-background (boolean)
when false, lftp refuses to go to background when exit-
ing. To force it, use `exit bg'.
cmd:move-background-detach (boolean)
when true (default), lftp detaches itself from the con-
trol terminal when moving to background, it is possible
to attach back using `attach' command; when false, lftp
tricks the shell to move lftp to background process
group and continues to run, then fg shell command
brings lftp back to foreground unless it has done all
jobs and terminated.
cmd:prompt (string)
The prompt. lftp recognizes the following backslash-
escaped special characters that are decoded as follows:
\@ insert @ if current user is not default
\a an ASCII bell character (07)
\e an ASCII escape character (033)
\h the hostname you are connected to
\n newline
\s the name of the client (lftp)
\S current slot name
\u the username of the user you are logged in as
\U the URL of the remote site (e.g.,
ftp://g437.ub.gu.se/home/james/src/lftp)
\v the version of lftp (e.g., 2.0.3)
\w the current working directory at the remote site
\W the base name of the current working directory at
the remote site
\nnn the character corresponding to the octal number
nnn
\\ a backslash
\? skips next character if previous substitution was
empty.
\[ begin a sequence of non-printing characters, which
could be used to embed a terminal control sequence
into the prompt
\] end a sequence of non-printing characters
SunOS 5.11 Last change: 16 Jun 2011 17
User Commands lftp(1)
cmd:parallel (number)
Number of jobs run in parallel in non-interactive mode.
For example, this may be useful for scripts with multi-
ple `get' commands. Note that setting this to a value
greater than 1 changes conditional execution behaviour,
basically makes it inconsistent.
cmd:queue-parallel (number)
Number of jobs run in parallel in a queue.
cmd:save-cwd-history (boolean)
when true, lftp saves last CWD of each site to
~/.lftp/cwd_history, allowing to do ``cd -'' after lftp
restart. Default is true.
cmd:save-rl-history (boolean)
when true, lftp saves readline history to
~/.lftp/rl_history on exit. Default is true.
cmd:set-term-status (boolean)
when true, lftp updates terminal status if supported
(e.g. xterm). The closure for this setting is the ter-
minal type from TERM environment variable.
cmd:status-interval (timeinterval)
the time interval between status updates.
cmd:stifle-rl-history (number)
the number of lines to keep in readline history.
cmd:term-status (string)
the format string to use to display terminal status.
The closure for this setting is the terminal type from
TERM environment variable. Default uses ``tsl'' and
``fsl'' termcap values.
The following escapes are supported:
\a bell
\e escape
\n new line
\s "lftp"
\v lftp version
\T the status string
cmd:time-style (string)
This setting is the default value for cls --time-style
option.
cmd:trace (boolean)
when true, lftp prints the commands it executes (like
sh -x).
SunOS 5.11 Last change: 16 Jun 2011 18
User Commands lftp(1)
cache:cache-empty-listings (boolean)
When false, empty listings are not cached.
cache:enable (boolean)
When false, cache is disabled.
cache:expire (time interval)
Positive cache entries expire in this time interval.
cache:expire-negative (time interval)
Negative cache entries expire in this time interval.
cache:size (number)
Maximum cache size. When exceeded, oldest cache entries
will be removed from cache.
cmd:remote-completion (boolean)
a boolean to control whether or not lftp uses remote
completion.
cmd:verify-host (boolean)
if true, lftp resolves host name immediately in `open'
command. It is also possible to skip the check for a
single `open' command if `&' is given, or if ^Z is
pressed during the check.
cmd:verify-path (boolean)
if true, lftp checks the path given in `cd' command.
It is also possible to skip the check for a single `cd'
command if `&' is given, or if ^Z is pressed during the
check. Examples:
set cmd:verify-path/hftp://* false
cd directory &
cmd:verify-path-cached (boolean)
When false, `cd' to a directory known from cache as
existent will succeed immediately. Otherwise the veri-
fication will depend on cmd:verify-path setting.
color:use-color (boolean)
when true, cls command and completion output colored
file listings according to color:dir-colors setting.
color:dir-colors (string)
file listing color description. By default the value of
LS_COLORS environment variable is used. See dircol-
ors(1).
dns:SRV-query (boolean)
query for SRV records and use them before gethostby-
name. The SRV records are only used if port is not
explicitly specified. See RFC2052 for details.
SunOS 5.11 Last change: 16 Jun 2011 19
User Commands lftp(1)
dns:cache-enable (boolean)
enable DNS cache. If it is off, lftp resolves host name
each time it reconnects.
dns:cache-expire (time interval)
time to live for DNS cache entries. It has format <num-
ber><unit>+, e.g. 1d12h30m5s or just 36h. To disable
expiration, set it to `inf' or `never'.
dns:cache-size (number)
maximum number of DNS cache entries.
dns:fatal-timeout (time interval)
limit the time for DNS queries. If DNS server is
unavailable too long, lftp will fail to resolve a given
host name. Set to `never' to disable.
dns:order (list of protocol names)
sets the order of DNS queries. Default is ``inet6
inet'' which means first look up address in inet6 fam-
ily, then inet and use them in that order. To disable
inet6 (AAAA) lookup, set this variable to ``inet''.
dns:use-fork (boolean)
if true, lftp will fork before resolving host address.
Default is true.
dns:max-retries (number)
If zero, there is no limit on the number of times lftp
will try to lookup an address. If > 0, lftp will try
only this number of times to look up an address of each
address family in dns:order.
file:charset (string)
local character set. It is set from current locale ini-
tially.
fish:charset (string)
the character set used by fish server in requests,
replies and file listings. Default is empty which
means the same as local.
fish:connect-program (string)
the program to use for connecting to remote server. It
should support `-l' option for user name, `-p' for port
number. Default is `ssh -a -x'. You can set it to
`rsh', for example.
fish:shell (string)
use specified shell on server side. Default is /bin/sh.
On some systems, /bin/sh exits when doing cd to a non-
existent directory. lftp can handle that but it has to
SunOS 5.11 Last change: 16 Jun 2011 20
User Commands lftp(1)
reconnect. Set it to /bin/bash for such systems if bash
is installed.
ftp:acct (string)
Send this string in ACCT command after login. The
result is ignored. The closure for this setting has
format user@host.
ftp:anon-pass (string)
sets the password used for anonymous ftp access authen-
tication. Default is "lftp@".
ftp:anon-user (string)
sets the user name used for anonymous ftp access
authentication. Default is "anonymous".
ftp:auto-sync-mode (regex)
if first server message matches this regex, turn on
sync mode for that host.
ftp:charset (string)
the character set used by ftp server in requests,
replies and file listings. Default is empty which
means the same as local. This setting is only used when
the server does not support UTF8.
ftp:client (string)
the name of ftp client to send with CLNT command, if
supported by server. If it is empty, then no CLNT com-
mand will be sent.
ftp:bind-data-socket (boolean)
bind data socket to the interface of control connection
(in passive mode). Default is true, exception is the
loopback interface.
ftp:fix-pasv-address (boolean)
if true, lftp will try to correct address returned by
server for PASV command in case when server address is
in public network and PASV returns an address from a
private network. In this case lftp would substitute
server address instead of the one returned by PASV com-
mand, port number would not be changed. Default is
true.
ftp:fxp-passive-source (boolean)
if true, lftp will try to set up source ftp server in
passive mode first, otherwise destination one. If first
attempt fails, lftp tries to set them up the other way.
If the other disposition fails too, lftp falls back to
plain copy. See also ftp:use-fxp.
SunOS 5.11 Last change: 16 Jun 2011 21
User Commands lftp(1)
ftp:home (string)
Initial directory. Default is empty string which means
auto. Set this to `/' if you don't like the look of %2F
in ftp URLs. The closure for this setting has format
user@host.
ftp:ignore-pasv-address (boolean)
If true, lftp uses control connection address instead
of the one returned in PASV reply for data connection.
This can be useful for broken NATs. Default is false.
ftp:list-empty-ok (boolean)
if set to false, empty lists from LIST command will be
treated as incorrect, and another method (NLST) will be
used.
ftp:list-options (string)
sets options which are always appended to LIST command.
It can be useful to set this to `-a' if server does not
show dot (hidden) files by default. Default is empty.
ftp:nop-interval (seconds)
delay between NOOP commands when downloading tail of a
file. This is useful for ftp servers which send "Trans-
fer complete" message before flushing data transfer. In
such cases NOOP commands can prevent connection time-
out.
ftp:passive-mode (boolean)
sets passive ftp mode. This can be useful if you are
behind a firewall or a dumb masquerading router. In
passive mode lftp uses PASV command, not the PORT com-
mand which is used in active mode. In passive mode lftp
itself makes the data connection to the server; in
active mode the server connects to lftp for data trans-
fer. Passive mode is the default.
ftp:port-ipv4 (ipv4 address)
specifies an IPv4 address to send with PORT command.
Default is empty which means to send the address of
local end of control connection.
ftp:port-range (from-to)
allowed port range for active mode. Format is min-max,
or `full' or `any' to indicate any port. Default is
`full'.
ftp:prefer-epsv (boolean)
use EPSV as preferred passive mode. Default is `false'.
ftp:proxy (URL)
specifies ftp proxy to use. To disable proxy set this
SunOS 5.11 Last change: 16 Jun 2011 22
User Commands lftp(1)
to empty string. Note that it is an ftp proxy which
uses ftp protocol, not ftp over http. Default value is
taken from environment variable ftp_proxy if it starts
with ``ftp://''. If your ftp proxy requires authentica-
tion, specify user name and password in the URL. If
ftp:proxy starts with http:// then hftp protocol (ftp
over http proxy) is used instead of ftp automatically.
ftp:proxy-auth-type (string)
When set to ``joined'', lftp sends
``user@[email protected]'' as user name to
proxy, and ``password@proxy_password'' as password.
When set to ``joined-acct'', lftp sends
``[email protected] proxy_user'' (with space) as
user name to proxy. The site password is sent as usual
and the proxy password is expected in the following
ACCT command.
When set to ``open'', lftp first sends proxy user and
proxy password and then ``OPEN ftp.example.org'' fol-
lowed by ``USER user''. The site password is then sent
as usual.
When set to ``user'' (default), lftp first sends proxy
user and proxy password and then ``[email protected]
ple.org'' as user name. The site password is then sent
as usual.
When set to ``proxy-user@host'', lftp first sends
``USER [email protected]'', then proxy pass-
word. The site user and password are then sent as
usual.
ftp:rest-list (boolean)
allow usage of REST command before LIST command. This
might be useful for large directories, but some ftp
servers silently ignore REST before LIST.
ftp:rest-stor (boolean)
if false, lftp will not try to use REST before STOR.
This can be useful for some buggy servers which corrupt
(fill with zeros) the file if REST followed by STOR is
used.
ftp:retry-530 (regex)
Retry on server reply 530 for PASS command if text
matches this regular expression. This setting should
be useful to distinguish between overloaded server
(temporary condition) and incorrect password (permanent
condition).
SunOS 5.11 Last change: 16 Jun 2011 23
User Commands lftp(1)
ftp:retry-530-anonymous (regex)
Additional regular expression for anonymous login, like
ftp:retry-530.
ftp:site-group (string)
Send this string in SITE GROUP command after login. The
result is ignored. The closure for this setting has
format user@host.
ftp:skey-allow (boolean)
allow sending skey/opie reply if server appears to sup-
port it. On by default.
ftp:skey-force (boolean)
do not send plain text password over the network, use
skey/opie instead. If skey/opie is not available,
assume failed login. Off by default.
ftp:ssl-allow (boolean)
if true, try to negotiate SSL connection with ftp
server for non-anonymous access. Default is true. This
and other ssl settings are only available if lftp was
compiled with an ssl/tls library.
ftp:ssl-data-use-keys (boolean)
if true, lftp loads ssl:key-file for protected data
connection too. When false, it does not, and the server
can match data and control connections by session ID.
Default is true.
ftp:ssl-force (boolean)
if true, refuse to send password in clear when server
does not support SSL. Default is false.
ftp:ssl-protect-data (boolean)
if true, request ssl connection for data transfers.
This is cpu-intensive but provides privacy. Default is
false.
ftp:ssl-protect-fxp (boolean)
if true, request ssl connection for data transfer
between two ftp servers in FXP mode. CPSV or SSCN com-
mand will be used in that case. If ssl connection fails
for some reason, lftp would try unprotected FXP trans-
fer unless ftp:ssl-force is set for any of the two
servers. Default is false.
ftp:ssl-protect-list (boolean)
if true, request ssl connection for file list trans-
fers. Default is true.
ftp:ssl-use-ccc (boolean)
SunOS 5.11 Last change: 16 Jun 2011 24
User Commands lftp(1)
if true, lftp would issue CCC command after logon, thus
disable ssl protection layer on control connection.
ftp:stat-interval (time interval)
interval between STAT commands. Default is 1 second.
ftp:sync-mode (boolean)
if true, lftp will send one command at a time and wait
for response. This might be useful if you are using a
buggy ftp server or router. When it is off, lftp sends
a pack of commands and waits for responses - it speeds
up operation when round trip time is significant.
Unfortunately it does not work with all ftp servers and
some routers have troubles with it, so it is on by
default.
ftp:timezone (string)
Assume this timezone for time in listings returned by
LIST command. This setting can be GMT offset
[+|-]HH[:MM[:SS]] or any valid TZ value (e.g.
Europe/Moscow or MSK-3MSD,M3.5.0,M10.5.0/3). The
default is GMT. Set it to an empty value to assume
local timezone specified by environment variable TZ.
ftp:trust-feat (string)
When true, assume that FEAT returned data are correct
and don't use common protocol extensions like SIZE,
MDTM, REST if they are not listed. Default is false.
ftp:use-abor (boolean)
if false, lftp does not send ABOR command but closes
data connection immediately.
ftp:use-allo (boolean)
when true (default), lftp sends ALLO command before
uploading a file.
ftp:use-feat (boolean)
when true (default), lftp uses FEAT command to deter-
mine extended features of ftp server.
ftp:use-fxp (boolean)
if true, lftp will try to set up direct connection
between two ftp servers.
ftp:use-hftp (boolean)
when ftp:proxy points to an http proxy, this setting
selects hftp method (GET, HEAD) when true, and CONNECT
method when false. Default is true.
ftp:use-ip-tos (boolean)
when true, lftp uses IPTOS_LOWDELAY for control
SunOS 5.11 Last change: 16 Jun 2011 25
User Commands lftp(1)
connection and IPTOS_THROUGHPUT for data connections.
ftp:lang (boolean)
the language selected with LANG command, if supported
as indicated by FEAT response. Default is empty which
means server default.
ftp:use-mdtm (boolean)
when true (default), lftp uses MDTM command to deter-
mine file modification time.
ftp:use-mdtm-overloaded (boolean)
when true, lftp uses two argument MDTM command to set
file modification time on uploaded files. Default is
false.
ftp:use-site-idle (boolean)
when true, lftp sends `SITE IDLE' command with net:idle
argument. Default is false.
ftp:use-site-utime (boolean)
when true, lftp sends 5-argument `SITE UTIME' command
to set file modification time on uploaded files.
Default is true.
ftp:use-site-utime2 (boolean)
when true, lftp sends 2-argument `SITE UTIME' command
to set file modification time on uploaded files.
Default is true. If 5-argument `SITE UTIME' is also
enabled, 2-argument command is tried first.
ftp:use-size (boolean)
when true (default), lftp uses SIZE command to deter-
mine file size.
ftp:use-stat (boolean)
if true, lftp sends STAT command in FXP mode transfer
to know how much data has been transferred. See also
ftp:stat-interval. Default is true.
ftp:use-stat-for-list (boolean)
when true, lftp uses STAT instead of LIST command. By
default `.' is used as STAT argument. Using STAT, lftp
avoids creating data connection for directory listing.
Some servers require special options for STAT, use
ftp:list-options to specify them (e.g. -la).
ftp:use-telnet-iac (boolean)
when true (default), lftp uses TELNET IAC command and
follows TELNET protocol as specified in RFC959. When
false, it does not follow TELNET protocol and thus does
not double 255 (0xFF, 0377) character and does not
SunOS 5.11 Last change: 16 Jun 2011 26
User Commands lftp(1)
prefix ABOR and STAT commands with TELNET IP+SYNCH sig-
nal.
ftp:use-quit (boolean)
if true, lftp sends QUIT before disconnecting from ftp
server. Default is true.
ftp:verify-address (boolean)
verify that data connection comes from the network
address of control connection peer. This can possibly
prevent data connection spoofing which can lead to data
corruption. Unfortunately, this can fail for certain
ftp servers with several network interfaces, when they
do not set outgoing address on data socket, so it is
disabled by default.
ftp:verify-port (boolean)
verify that data connection has port 20 (ftp-data) on
its remote end. This can possibly prevent data connec-
tion spoofing by users of remote host. Unfortunately,
too many windows and even unix ftp servers forget to
set proper port on data connection, thus this check is
off by default.
ftp:web-mode (boolean)
disconnect after closing data connection. This can be
useful for totally broken ftp servers. Default is
false.
ftps:initial-prot (string)
specifies initial PROT setting for FTPS connections.
Should be one of: C, S, E, P, or empty. Default is
empty which means unknown, so that lftp will use PROT
command unconditionally. If PROT command turns out to
be unsupported, then Clear mode would be assumed.
hftp:cache (boolean)
allow server/proxy side caching for ftp-over-http pro-
tocol.
hftp:cache-control (string)
specify corresponding HTTP request header.
hftp:proxy (URL)
specifies http proxy for ftp-over-http protocol (hftp).
The protocol hftp cannot work without a http proxy,
obviously. Default value is taken from environment
variable ftp_proxy if it starts with ``http://'', oth-
erwise from environment variable http_proxy. If your
ftp proxy requires authentication, specify user name
and password in the URL.
SunOS 5.11 Last change: 16 Jun 2011 27
User Commands lftp(1)
hftp:use-authorization (boolean)
if set to off, lftp will send password as part of URL
to the proxy. This may be required for some proxies
(e.g. M-soft). Default is on, and lftp will send pass-
word as part of Authorization header.
hftp:use-head (boolean)
if set to off, lftp will try to use `GET' instead of
`HEAD' for hftp protocol. While this is slower, it may
allow lftp to work with some proxies which don't under-
stand or mishandle ``HEAD ftp://'' requests.
hftp:use-mkcol (boolean)
if set to off, lftp will try to use `PUT' instead of
`MKCOL' to create directories with hftp protocol.
Default is off.
hftp:use-propfind (boolean)
if set to off, lftp will not try to use `PROPFIND' to
get directory contents with hftp protocol and use `GET'
instead. Default is off.
hftp:use-type (boolean)
If set to off, lftp won't try to append `;type=' to
URLs passed to proxy. Some broken proxies don't handle
it correctly. Default is on.
http:accept, http:accept-charset, http:accept-language
(string)
specify corresponding HTTP request headers.
http:authorization (string)
the authorization to use by default, when no user is
specified. The format is ``user:password''. Default is
empty which means no authorization.
http:cache (boolean)
allow server/proxy side caching.
http:cache-control (string)
specify corresponding HTTP request header.
http:cookie (string)
send this cookie to server. A closure is useful here:
set cookie/www.somehost.com "param=value"
http:post-content-type (string)
specifies value of Content-Type http request header for
POST method. Default is ``application/x-www-form-
urlencoded''.
http:proxy (URL)
SunOS 5.11 Last change: 16 Jun 2011 28
User Commands lftp(1)
specifies http proxy. It is used when lftp works over
http protocol. Default value is taken from environment
variable http_proxy. If your proxy requires authenti-
cation, specify user name and password in the URL.
http:put-method (PUT or POST)
specifies which http method to use on put.
http:put-content-type (string)
specifies value of Content-Type http request header for
PUT method.
http:referer (string)
specifies value for Referer http request header. Single
dot `.' expands to current directory URL. Default is
`.'. Set to empty string to disable Referer header.
http:set-cookies (boolean)
if true, lftp modifies http:cookie variables when Set-
Cookie header is received.
http:use-mkcol (boolean)
if set to off, lftp will try to use `PUT' instead of
`MKCOL' to create directories with http protocol.
Default is on.
http:use-propfind (boolean)
if set to off, lftp will not try to use `PROPFIND' to
get directory contents with http protocol and use `GET'
instead. Default is on.
http:user-agent (string)
the string lftp sends in User-Agent header of HTTP
request.
https:proxy (string)
specifies https proxy. Default value is taken from
environment variable https_proxy.
mirror:dereference (boolean)
when true, mirror will dereference symbolic links by
default. You can override it by --no-dereference
option. Default if false.
mirror:exclude-regex (regex)
specifies default exclusion pattern. You can override
it by --include option.
mirror:include-regex (regex)
specifies default inclusion pattern. It is used just
after mirror:exclude-regex is applied. It is never used
if mirror:exclude-regex is empty.
SunOS 5.11 Last change: 16 Jun 2011 29
User Commands lftp(1)
mirror:no-empty-dirs (boolean)
when true, mirror doesn't create empty directories
(like --no-empty-dirs option).
mirror:order (list of patterns)
specifies order of file transfers. E.g. setting this to
"*.sfv *.sum" makes mirror to transfer files matching
*.sfv first, then ones matching *.sum and then all
other files. To process directories after other files,
add "*/" to end of pattern list.
mirror:parallel-directories (boolean)
if true, mirror will start processing of several direc-
tories in parallel when it is in parallel mode. Other-
wise, it will transfer files from a single directory
before moving to other directories.
mirror:parallel-transfer-count (number)
specifies number of parallel transfers mirror is
allowed to start. Default is 1. You can override it
with --parallel option.
mirror:set-permissions (boolean)
When set to off, mirror won't try to copy file and
directory permissions. You can override it by --perms
option. Default is on.
mirror:skip-noaccess (boolean)
when true, mirror does not try to download files which
are obviously unaccessible by the permission mask.
Defaule is false.
mirror:use-pget-n (number)
specifies -n option for pget command used to transfer
every single file under mirror. Default is 1 which dis-
ables pget.
module:path (string)
colon separated list of directories to look for mod-
ules. Can be initialized by environment variable
LFTP_MODULE_PATH. Default is `PKGLIBDIR/VERSION:PKGLIB-
DIR'.
net:connection-limit (number)
maximum number of concurrent connections to the same
site. 0 means unlimited.
net:connection-takeover (boolean)
if true, foreground connections have priority over
background ones and can interrupt background transfers
to complete a foreground operation.
SunOS 5.11 Last change: 16 Jun 2011 30
User Commands lftp(1)
net:idle (time interval)
disconnect from server after this idle time. Default is
3 minutes.
net:limit-rate (bytes per second)
limit transfer rate on data connection. 0 means unlim-
ited. You can specify two numbers separated by colon to
limit download and upload rate separately.
net:limit-max (bytes)
limit accumulating of unused limit-rate. 0 means twice
of limit-rate.
net:limit-total-rate (bytes per second)
limit transfer rate of all connections in sum. 0 means
unlimited. You can specify two numbers separated by
colon to limit download and upload rate separately.
Note that sockets have receive buffers on them, this
can lead to network link load higher than this rate
limit just after transfer beginning. You can try to set
net:socket-buffer to relatively small value to avoid
this.
net:limit-total-max (bytes)
limit accumulating of unused limit-total-rate. 0 means
twice of limit-total-rate.
net:max-retries (number)
the maximum number of sequential retries of an opera-
tion without success. 0 means unlimited.
net:no-proxy (string)
contains comma separated list of domains for which
proxy should not be used. Default is taken from envi-
ronment variable no_proxy.
net:persist-retries (number)
ignore this number of hard errors. Useful to login to
buggy ftp servers which reply 5xx when there is too
many users.
net:reconnect-interval-base (seconds)
sets the base minimal time between reconnects. Actual
interval depends on net:reconnect-interval-multiplier
and number of attempts to perform an operation.
net:reconnect-interval-max (seconds)
sets maximum reconnect interval. When current interval
after multiplication by net:reconnect-interval-multi-
plier reachs this value (or exceeds it), it is reset
back to net:reconnect-interval-base.
SunOS 5.11 Last change: 16 Jun 2011 31
User Commands lftp(1)
net:reconnect-interval-multiplier (real number)
sets multiplier by which base interval is multiplied
each time new attempt to perform an operation fails.
When the interval reachs maximum, it is reset to base
value. See net:reconnect-interval-base and net:recon-
nect-interval-max.
net:socket-bind-ipv4 (ipv4 address)
bind all IPv4 sockets to specified address. This can be
useful to select a specific network interface to use.
Default is empty which means not to bind IPv4 sockets,
operating system will choose an address automatically
using routing table.
net:socket-bind-ipv6 (ipv6 address)
the same for IPv6 sockets.
net:socket-buffer (bytes)
use given size for SO_SNDBUF and SO_RCVBUF socket
options. 0 means system default.
net:socket-maxseg (bytes)
use given size for TCP_MAXSEG socket option. Not all
operating systems support this option, but linux does.
net:timeout (time interval)
sets the network protocol timeout.
pget:default-n (number)
default number of chunks to split the file to in pget.
pget:save-status (time interval)
save pget transfer status this often. Set to `never' to
disable saving of the status file. The status is saved
to a file with suffix .lftp-pget-status.
sftp:charset (string)
the character set used by sftp server in file names and
file listings. Default is empty which means the same
as local. This setting is only used for sftp protocol
version prior to 4. Version 4 and later always use
UTF-8.
sftp:connect-program (string)
the program to use for connecting to remote server. It
should support `-l' option for user name, `-p' for port
number. Default is `ssh -a -x'. You can set it to
`rsh', for example.
sftp:max-packets-in-flight (number)
The maximum number of unreplied packets in flight. If
round trip time is significant, you should increase
SunOS 5.11 Last change: 16 Jun 2011 32
User Commands lftp(1)
this and size-read/size-write. Default is 16.
sftp:protocol-version (number)
The protocol number to negotiate. Default is 4. The
actual protocol version used depends on server.
sftp:server-program (string)
The server program implementing SFTP protocol. If it
does not contain a slash `/', it is considered a ssh2
subsystem and -s option is used when starting connect-
program. Default is `sftp'. You can use rsh as trans-
port level protocol like this:
set sftp:connect-program rsh
set sftp:server-program /usr/libexec/openssh/sftp-server
Similarly you can run sftp over ssh1.
sftp:size-read (number)
Block size for reading. Default is 0x8000.
sftp:size-write (number)
Block size for writing. Default is 0x8000.
ssl:ca-file (path to file)
use specified file as Certificate Authority certifi-
cate.
ssl:ca-path (path to directory)
use specified directory as Certificate Authority cer-
tificate repository (OpenSSL only).
ssl:check-hostname (boolean)
when true, lftp checks if the host name used to connect
to the server corresponds to the host name in its cer-
tificate.
ssl:crl-file (path to file)
use specified file as Certificate Revocation List cer-
tificate.
ssl:crl-path (path to directory)
use specified directory as Certificate Revocation List
certificate repository (OpenSSL only).
ssl:key-file (path to file)
use specified file as your private key.
ssl:cert-file (path to file)
use specified file as your certificate.
ssl:verify-certificate (boolean)
if set to yes, then verify server's certificate to be
signed by a known Certificate Authority and not be on
SunOS 5.11 Last change: 16 Jun 2011 33
User Commands lftp(1)
Certificate Revocation List.
torrent:ip (ipv4 address)
IP address to send to the tracker. Specify it if you
are using an http proxy.
torrent:ipv6 (ipv6 address)
IPv6 address to send to the tracker. By default, first
found global unicast address is used.
torrent:max-peers (number)
maximum number of peers for a torrent. Least used peers
are removed to maintain this limit.
torrent:port-range (from-to)
port range to accept connections on. A single port is
selected when a torrent starts.
torrent:seed-max-time (time interval)
maximum seed time. After this period of time a complete
torrent shuts down independently of ratio. It can be
set to infinity if needed.
torrent:seed-min-peers (number)
minimum number of peers when the torrent is complete.
If there are less, new peers are actively searched for.
torrent:stop-on-ratio (real number)
torrent stops when it's complete and ratio reached this
number.
xfer:clobber (boolean)
if this setting is off, get commands will not overwrite
existing files and generate an error instead.
xfer:destination-directory (path or URL to directory)
This setting is used as default -O option for get and
mget commands. Default is empty, which means current
directory (no -O option).
xfer:disk-full-fatal (boolean)
when true, lftp aborts a transfer if it cannot write
target file because of full disk or quota; when false,
lftp waits for disk space to be freed.
xfer:eta-period (seconds)
the period over which weighted average rate is calcu-
lated to produce ETA.
xfer:eta-terse (boolean)
show terse ETA (only high order parts). Default is
true.
SunOS 5.11 Last change: 16 Jun 2011 34
User Commands lftp(1)
xfer:log (boolean)
when true, lftp logs transfers to a file from xfer:log-
file setting.
xfer:log-file (boolean)
the file to log transfers to. Default is ~/.lftp/trans-
fer_log.
xfer:make-backup (boolean)
when true, lftp renames pre-existing file adding ``~''
suffix instead of overwriting it.
xfer:max-redirections (number)
maximum number of redirections. This can be useful for
downloading over HTTP. 0 prohibits redirections.
xfer:rate-period (seconds)
the period over which weighted average rate is calcu-
lated to be shown.
xfer:verify (boolean)
when true, verify-command is launched after successful
transfer to validate file integrity. Zero exit code of
that command should indicate correctness of the file.
xfer:verify-command (string)
the command to validate file integrity. The only argu-
ment is the path to the file.
The name of a variable can be abbreviated unless it becomes
ambiguous. The prefix before `:' can be omitted too. You can
set one variable several times for different closures, and
thus you can get a particular settings for particular state.
The closure is to be specified after variable name separated
with slash `/'.
The closure for `dns:', `net:', `ftp:', `http:', `hftp:'
domain variables is currently just the host name as you
specify it in the `open' command (with some exceptions where
closure is meaningless, e.g. dns:cache-size). For some
`cmd:' domain variables the closure is current URL without
path. For other variables it is not currently used. See
examples in the sample lftp.conf.
Certain commands and settings take a time interval parame-
ter. It has the format Nx[Nx...], where N is time amount
(floating point) and x is time unit: d - days, h - hours, m
- minutes, s - seconds. Default unit is second. E.g. 5h30m
or 5.5h. Also the interval can be `infinity', `inf',
`never', `forever' - it means infinite interval. E.g. `sleep
forever' or `set dns:cache-expire never'.
SunOS 5.11 Last change: 16 Jun 2011 35
User Commands lftp(1)
Boolean settings can be one of (true, on, yes, 1, +) for a
True value or one of (false, off, no, 0, -) for a False
value.
Integer settings can have a suffix: k - kibi, m - mebi, g -
gigi, etc. They can also have a prefix: 0 - octal, 0x -
hexadecimal.
FTP asynchronous mode (pipelining)
Lftp can speed up ftp operations by sending several commands
at once and then checking all the responses. See ftp:sync-
mode variable. Sometimes this does not work, thus synchro-
nous mode is the default. You can try to turn synchronous
mode off and see if it works for you. It is known that some
network software dealing with address translation works
incorrectly in the case of several FTP commands in one net-
work packet.
RFC959 says: ``The user-process sending another command
before the completion reply would be in violation of proto-
col; but server-FTP processes should queue any commands that
arrive while a preceding command is in progress''. Also,
RFC1123 says: ``Implementors MUST NOT assume any correspon-
dence between READ boundaries on the control connection and
the Telnet EOL sequences (CR LF).'' and ``a single READ from
the control connection may include more than one FTP com-
mand''.
So it must be safe to send several commands at once, which
speeds up operation a lot and seems to work with all Unix
and VMS based ftp servers. Unfortunately, windows based
servers often cannot handle several commands in one packet,
and so cannot some broken routers.
OPTIONS
-d Switch on debugging mode
-e commands
Execute given commands and don't exit.
-p port
Use the given port to connect
-u user[,pass]
Use the given username and password to connect
-f script_file
Execute commands in the file and exit
-c commands
SunOS 5.11 Last change: 16 Jun 2011 36
User Commands lftp(1)
Execute the given commands and exit. Commands can be
separated with a semicolon, `&&' or `||'.
ENVIRONMENT VARIABLES
The following environment variables are processed by lftp:
HOME Used for (local) tilde (`~') expansion
SHELL
Used by the ! command to determine the shell to run.
PAGER
This should be the name of the pager to use. It's used
by the more and zmore commands.
http_proxy, https_proxy
Used to set initial http:proxy, hftp:proxy and
https:proxy variables.
ftp_proxy
Used to set initial ftp:proxy or hftp:proxy variables,
depending on URL protocol used in this environment
variable.
no_proxy
Used to set initial net:no-proxy variable.
LFTP_MODULE_PATH
Used to set initial module:path variable.
LFTP_HOME
Used to locate the directory that stores user-specific
configuration files. If unset, ~/.lftp will be used.
LS_COLORS
used to set initial color:dir-colors variable.
FILES
/etc/lftp.conf
system-wide startup file. Actual location depends on
--sysconfdir configure option. It is /etc when prefix
is /usr, /usr/local/etc by default.
~/.lftp/rc, ~/.lftprc
These files are executed on lftp startup after
/etc/lftp.conf.
~/.lftp/log
The file things are logged to when lftp moves into the
SunOS 5.11 Last change: 16 Jun 2011 37
User Commands lftp(1)
background in nohup mode.
~/.lftp/transfer_log
The file transfers are logged to when xfer:log setting
is set to `yes'. The location can be changed by
xfer:log-file setting.
~/.lftp/bookmarks
The file is used to store lftp's bookmarks. See the
bookmark command.
~/.lftp/cwd_history
The file is used to store last working directories for
each site visited.
~/.lftp/bg/
The directory is used to store named sockets for back-
grounded lftp processes.
~/.netrc
The file is consulted to get default login and password
to ftp server. Passwords are also searched here if an
URL with user name but with no password is used.
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | network/ftp/lftp |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
SEE ALSO
ftpd(1M), ftp(1)
RFC854 (telnet), RFC959 (ftp), RFC1123, RFC1945 (http/1.0),
RFC2052 (SRV RR), RFC2228 (ftp security extensions), RFC2389
(ftp FEAT), RFC2428 (ftp/ipv6), RFC2518 (WebDAV), RFC2616
(http/1.1), RFC2617 (http/1.1 authentication), RFC2640 (ftp
i18n), RFC4217 (ftp over ssl).
http://www.ietf.org/internet-drafts/draft-ietf-ftpext-
mlst-16.txt (ftp extensions over RFC959),
http://www.ietf.org/internet-drafts/draft-ietf-secsh-
filexfer-10.txt (sftp).
http://wiki.theory.org/BitTorrentSpecification
http://www.bittornado.com/docs/multitracker-spec.txt
SunOS 5.11 Last change: 16 Jun 2011 38
User Commands lftp(1)
AUTHOR
Alexander V. Lukyanov
[email protected]
ACKNOWLEDGMENTS
This manual page was originally written by Christoph Lameter
<[email protected]>, for the Debian GNU/Linux system. The
page was improved and updated later by Nicolas Lichtmaier
<[email protected]>, James Troup
<[email protected]> and Alexander V. Lukyanov
<[email protected]>.
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://ftp.yars.free.net/pub/source/lftp/lftp-4.3.1.tar.bz2
Further information about this software can be found on the
open source community website at http://lftp.yar.ru/.
SunOS 5.11 Last change: 16 Jun 2011 39