perlaix
(1)
Name
perlaix - Perl version 5 on IBM AIX (UNIX) systems
Synopsis
Please see following description for synopsis
Description
Perl Programmers Reference Guide PERLAIX(1)
NAME
README.aix - Perl version 5 on IBM AIX (UNIX) systems
DESCRIPTION
This document describes various features of IBM's UNIX
operating system AIX that will affect how Perl version 5
(hereafter just Perl) is compiled and/or runs.
Compiling Perl 5 on AIX
For information on compilers on older versions of AIX, see
"Compiling Perl 5 on older AIX versions up to 4.3.3".
When compiling Perl, you must use an ANSI C compiler. AIX
does not ship an ANSI compliant C compiler with AIX by
default, but binary builds of gcc for AIX are widely
available. A version of gcc is also included in the AIX
Toolbox which is shipped with AIX.
Supported Compilers
Currently all versions of IBM's "xlc", "xlc_r", "cc", "cc_r"
or "vac" ANSI/C compiler will work for building Perl if that
compiler works on your system.
If you plan to link Perl to any module that requires thread-
support, like DBD::Oracle, it is better to use the _r
version of the compiler. This will not build a threaded
Perl, but a thread-enabled Perl. See also "Threaded Perl"
later on.
As of writing (2010-09) only the IBM XL C for AIX or IBM XL
C/C++ for AIX compiler is supported by IBM on AIX
5L/6.1/7.1.
The following compiler versions are currently supported by
IBM:
IBM XL C and IBM XL C/C++ V8, V9, V10, V11
The XL C for AIX is integrated in the XL C/C++ for AIX
compiler and therefore also supported.
If you choose XL C/C++ V9 you need APAR IZ35785 installed
otherwise the integrated SDBM_File do not compile correctly
due to an optimization bug. You can circumvent this problem
by adding -qipa to the optimization flags (-Doptimize='-O
-qipa'). The PTF for APAR IZ35785 which solves this problem
is available from IBM (April 2009 PTF for XL C/C++
Enterprise Edition for AIX, V9.0).
If you choose XL C/C++ V11 you need the April 2010 PTF (or
newer) installed otherwise you will not get a working Perl
version.
perl v5.12.5 Last change: 2012-11-03 1
Perl Programmers Reference Guide PERLAIX(1)
Perl can be compiled with either IBM's ANSI C compiler or
with gcc. The former is recommended, as not only it can
compile Perl with no difficulty, but also can take advantage
of features listed later that require the use of IBM
compiler-specific command-line flags.
If you decide to use gcc, make sure your installation is
recent and complete, and be sure to read the Perl INSTALL
file for more gcc-specific details. Please report any hoops
you had to jump through to the development team.
Incompatibility with AIX Toolbox lib gdbm
If the AIX Toolbox version of lib gdbm < 1.8.3-5 is
installed on your system then Perl will not work. This
library contains the header files
/opt/freeware/include/gdbm/dbm.h|ndbm.h which conflict with
the AIX system versions. The lib gdbm will be automatically
removed from the wanted libraries if the presence of one of
these two header files is detected. If you want to build
Perl with GDBM support then please install at least
gdbm-devel-1.8.3-5 (or higher).
Perl 5 was successfully compiled and tested on:
Perl | AIX Level | Compiler Level | w th | w/o th
-------+---------------------+-------------------------+------+-------
5.12.3 |5.1 TL9 32 bit | XL C/C++ V7 | OK | OK
5.12.3 |5.1 TL9 64 bit | XL C/C++ V7 | OK | OK
5.12.3 |5.2 TL10 SP8 32 bit | XL C/C++ V8 | OK | OK
5.12.3 |5.2 TL10 SP8 32 bit | gcc 3.2.2 | OK | OK
5.12.3 |5.2 TL10 SP8 64 bit | XL C/C++ V8 | OK | OK
5.12.3 |5.3 TL8 SP8 32 bit | XL C/C++ V9 + IZ35785 | OK | OK
5.12.3 |5.3 TL8 SP8 32 bit | gcc 4.2.4 | OK | OK
5.12.3 |5.3 TL8 SP8 64 bit | XL C/C++ V9 + IZ35785 | OK | OK
5.12.3 |5.3 TL10 SP3 32 bit | XL C/C++ V11 + Apr 2010 | OK | OK
5.12.3 |5.3 TL10 SP3 64 bit | XL C/C++ V11 + Apr 2010 | OK | OK
5.12.3 |6.1 TL1 SP7 32 bit | XL C/C++ V10 | OK | OK
5.12.3 |6.1 TL1 SP7 64 bit | XL C/C++ V10 | OK | OK
5.13 |7.1 TL0 SP1 32 bit | XL C/C++ V11 + Jul 2010 | OK | OK
5.13 |7.1 TL0 SP1 64 bit | XL C/C++ V11 + Jul 2010 | OK | OK
w th = with thread support
w/o th = without thread support
OK = tested
Successfully tested means that all "make test" runs finish
with a result of 100% OK. All tests were conducted with
-Duseshrplib set.
All tests were conducted on the oldest supported AIX
technology level with the latest support package applied. If
the tested AIX version is out of support (AIX 4.3.3, 5.1,
5.2) then the last available support level was used.
perl v5.12.5 Last change: 2012-11-03 2
Perl Programmers Reference Guide PERLAIX(1)
Building Dynamic Extensions on AIX
Starting from Perl 5.7.2 (and consequently 5.8.x / 5.10.x /
5.12.x) and AIX 4.3 or newer Perl uses the AIX native
dynamic loading interface in the so called runtime linking
mode instead of the emulated interface that was used in Perl
releases 5.6.1 and earlier or, for AIX releases 4.2 and
earlier. This change does break backward compatibility with
compiled modules from earlier Perl releases. The change was
made to make Perl more compliant with other applications
like Apache/mod_perl which are using the AIX native
interface. This change also enables the use of C++ code with
static constructors and destructors in Perl extensions,
which was not possible using the emulated interface.
It is highly recommended to use the new interface.
Using Large Files with Perl
Should yield no problems.
Threaded Perl
Should yield no problems with AIX 5.1 / 5.2 / 5.3 / 6.1 /
7.1.
IBM uses the AIX system Perl (V5.6.0 on AIX 5.1 and V5.8.2
on AIX 5.2 / 5.3 and 6.1; V5.8.8 on AIX 5.3 TL11 and AIX 6.1
TL4; V5.10.1 on AIX 7.1) for some AIX system scripts. If you
switch the links in /usr/bin from the AIX system Perl
(/usr/opt/perl5) to the newly build Perl then you get the
same features as with the IBM AIX system Perl if the
threaded options are used.
The threaded Perl build works also on AIX 5.1 but the IBM
Perl build (Perl v5.6.0) is not threaded on AIX 5.1.
Perl 5.12 an newer is not compatible with the IBM fileset
perl.libext.
64-bit Perl
If your AIX system is installed with 64-bit support, you can
expect 64-bit configurations to work. If you want to use
64-bit Perl on AIX 6.1 you need an APAR for a libc.a bug
which affects (n)dbm_XXX functions. The APAR number for
this problem is IZ39077.
If you need more memory (larger data segment) for your Perl
programs you can set:
/etc/security/limits
default: (or your user)
data = -1 (default is 262144 * 512 byte)
perl v5.12.5 Last change: 2012-11-03 3
Perl Programmers Reference Guide PERLAIX(1)
With the default setting the size is limited to 128MB. The
-1 removes this limit. If the "make test" fails please
change your /etc/security/limits as stated above.
Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1
(threaded/32-bit)
With the following options you get a threaded Perl version
which passes all make tests in threaded 32-bit mode, which
is the default configuration for the Perl builds that AIX
ships with.
rm config.sh
./Configure \
-d \
-Dcc=cc_r \
-Duseshrplib \
-Dusethreads \
-Dprefix=/usr/opt/perl5_32
The -Dprefix option will install Perl in a directory
parallel to the IBM AIX system Perl installation.
Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (32-bit)
With the following options you get a Perl version which
passes all make tests in 32-bit mode.
rm config.sh
./Configure \
-d \
-Dcc=cc_r \
-Duseshrplib \
-Dprefix=/usr/opt/perl5_32
The -Dprefix option will install Perl in a directory
parallel to the IBM AIX system Perl installation.
Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1
(threaded/64-bit)
With the following options you get a threaded Perl version
which passes all make tests in 64-bit mode.
export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell)
rm config.sh
./Configure \
-d \
-Dcc=cc_r \
-Duseshrplib \
-Dusethreads \
-Duse64bitall \
-Dprefix=/usr/opt/perl5_64
perl v5.12.5 Last change: 2012-11-03 4
Perl Programmers Reference Guide PERLAIX(1)
Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (64-bit)
With the following options you get a Perl version which
passes all make tests in 64-bit mode.
export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell)
rm config.sh
./Configure \
-d \
-Dcc=cc_r \
-Duseshrplib \
-Duse64bitall \
-Dprefix=/usr/opt/perl5_64
The -Dprefix option will install Perl in a directory
parallel to the IBM AIX system Perl installation.
If you choose gcc to compile 64-bit Perl then you need to
add the following option:
-Dcc='gcc -maix64'
Compiling Perl 5 on older AIX versions up to 4.3.3
Due to the fact that AIX 4.3.3 reached end-of-service in
December 31, 2003 this information is provided as is. The
Perl versions prior to Perl 5.8.9 could be compiled on AIX
up to 4.3.3 with the following settings (your mileage may
vary):
When compiling Perl, you must use an ANSI C compiler. AIX
does not ship an ANSI compliant C-compiler with AIX by
default, but binary builds of gcc for AIX are widely
available.
At the moment of writing, AIX supports two different native
C compilers, for which you have to pay: xlC and vac. If you
decide to use either of these two (which is quite a lot
easier than using gcc), be sure to upgrade to the latest
available patch level. Currently:
xlC.C 3.1.4.10 or 3.6.6.0 or 4.0.2.2 or 5.0.2.9 or 6.0.0.3
vac.C 4.4.0.3 or 5.0.2.6 or 6.0.0.1
note that xlC has the OS version in the name as of version
4.0.2.0, so you will find xlC.C for AIX-5.0 as package
xlC.aix50.rte 5.0.2.0 or 6.0.0.3
subversions are not the same "latest" on all OS versions.
For example, the latest xlC-5 on aix41 is 5.0.2.9, while on
aix43, it is 5.0.2.7.
perl v5.12.5 Last change: 2012-11-03 5
Perl Programmers Reference Guide PERLAIX(1)
Perl can be compiled with either IBM's ANSI C compiler or
with gcc. The former is recommended, as not only can it
compile Perl with no difficulty, but also can take advantage
of features listed later that require the use of IBM
compiler-specific command-line flags.
The IBM's compiler patch levels 5.0.0.0 and 5.0.1.0 have
compiler optimization bugs that affect compiling perl.c and
regcomp.c, respectively. If Perl's configuration detects
those compiler patch levels, optimization is turned off for
the said source code files. Upgrading to at least 5.0.2.0
is recommended.
If you decide to use gcc, make sure your installation is
recent and complete, and be sure to read the Perl INSTALL
file for more gcc-specific details. Please report any hoops
you had to jump through to the development team.
OS level
Before installing the patches to the IBM C-compiler you need
to know the level of patching for the Operating System.
IBM's command 'oslevel' will show the base, but is not
always complete (in this example oslevel shows 4.3.NULL,
whereas the system might run most of 4.3.THREE):
# oslevel
4.3.0.0
# lslpp -l | grep 'bos.rte '
bos.rte 4.3.3.75 COMMITTED Base Operating System Runtime
bos.rte 4.3.2.0 COMMITTED Base Operating System Runtime
#
The same might happen to AIX 5.1 or other OS levels. As a
side note, Perl cannot be built without bos.adt.syscalls and
bos.adt.libm installed
# lslpp -l | egrep "syscalls|libm"
bos.adt.libm 5.1.0.25 COMMITTED Base Application Development
bos.adt.syscalls 5.1.0.36 COMMITTED System Calls Application
#
Building Dynamic Extensions on AIX < 5L
AIX supports dynamically loadable objects as well as shared
libraries. Shared libraries by convention end with the
suffix .a, which is a bit misleading, as an archive can
contain static as well as dynamic members. For Perl
dynamically loaded objects we use the .so suffix also used
on many other platforms.
Note that starting from Perl 5.7.2 (and consequently 5.8.0)
and AIX 4.3 or newer Perl uses the AIX native dynamic
loading interface in the so called runtime linking mode
perl v5.12.5 Last change: 2012-11-03 6
Perl Programmers Reference Guide PERLAIX(1)
instead of the emulated interface that was used in Perl
releases 5.6.1 and earlier or, for AIX releases 4.2 and
earlier. This change does break backward compatibility with
compiled modules from earlier Perl releases. The change was
made to make Perl more compliant with other applications
like Apache/mod_perl which are using the AIX native
interface. This change also enables the use of C++ code with
static constructors and destructors in Perl extensions,
which was not possible using the emulated interface.
The IBM ANSI C Compiler
All defaults for Configure can be used.
If you've chosen to use vac 4, be sure to run 4.4.0.3. Older
versions will turn up nasty later on. For vac 5 be sure to
run at least 5.0.1.0, but vac 5.0.2.6 or up is highly
recommended. Note that since IBM has removed vac 5.0.2.1
through 5.0.2.5 from the software depot, these versions
should be considered obsolete.
Here's a brief lead of how to upgrade the compiler to the
latest level. Of course this is subject to changes. You
can only upgrade versions from ftp-available updates if the
first three digit groups are the same (in where you can skip
intermediate unlike the patches in the developer snapshots
of Perl), or to one version up where the "base" is
available. In other words, the AIX compiler patches are
cumulative.
vac.C.4.4.0.1 => vac.C.4.4.0.3 is OK (vac.C.4.4.0.2 not needed)
xlC.C.3.1.3.3 => xlC.C.3.1.4.10 is NOT OK (xlC.C.3.1.4.0 is not available)
# ftp ftp.software.ibm.com
Connected to service.boulder.ibm.com.
: welcome message ...
Name (ftp.software.ibm.com:merijn): anonymous
331 Guest login ok, send your complete e-mail address as password.
Password:
... accepted login stuff
ftp> cd /aix/fixes/v4/
ftp> dir other other.ll
output to local-file: other.ll? y
200 PORT command successful.
150 Opening ASCII mode data connection for /bin/ls.
226 Transfer complete.
ftp> dir xlc xlc.ll
output to local-file: xlc.ll? y
200 PORT command successful.
150 Opening ASCII mode data connection for /bin/ls.
226 Transfer complete.
ftp> bye
... goodbye messages
perl v5.12.5 Last change: 2012-11-03 7
Perl Programmers Reference Guide PERLAIX(1)
# ls -l *.ll
-rw-rw-rw- 1 merijn system 1169432 Nov 2 17:29 other.ll
-rw-rw-rw- 1 merijn system 29170 Nov 2 17:29 xlc.ll
On AIX 4.2 using xlC, we continue:
# lslpp -l | fgrep 'xlC.C '
xlC.C 3.1.4.9 COMMITTED C for AIX Compiler
xlC.C 3.1.4.0 COMMITTED C for AIX Compiler
# grep 'xlC.C.3.1.4.*.bff' xlc.ll
-rw-r--r-- 1 45776101 1 6286336 Jul 22 1996 xlC.C.3.1.4.1.bff
-rw-rw-r-- 1 45776101 1 6173696 Aug 24 1998 xlC.C.3.1.4.10.bff
-rw-r--r-- 1 45776101 1 6319104 Aug 14 1996 xlC.C.3.1.4.2.bff
-rw-r--r-- 1 45776101 1 6316032 Oct 21 1996 xlC.C.3.1.4.3.bff
-rw-r--r-- 1 45776101 1 6315008 Dec 20 1996 xlC.C.3.1.4.4.bff
-rw-rw-r-- 1 45776101 1 6178816 Mar 28 1997 xlC.C.3.1.4.5.bff
-rw-rw-r-- 1 45776101 1 6188032 May 22 1997 xlC.C.3.1.4.6.bff
-rw-rw-r-- 1 45776101 1 6191104 Sep 5 1997 xlC.C.3.1.4.7.bff
-rw-rw-r-- 1 45776101 1 6185984 Jan 13 1998 xlC.C.3.1.4.8.bff
-rw-rw-r-- 1 45776101 1 6169600 May 27 1998 xlC.C.3.1.4.9.bff
# wget ftp://ftp.software.ibm.com/aix/fixes/v4/xlc/xlC.C.3.1.4.10.bff
#
On AIX 4.3 using vac, we continue:
# lslpp -l | grep 'vac.C '
vac.C 5.0.2.2 COMMITTED C for AIX Compiler
vac.C 5.0.2.0 COMMITTED C for AIX Compiler
# grep 'vac.C.5.0.2.*.bff' other.ll
-rw-rw-r-- 1 45776101 1 13592576 Apr 16 2001 vac.C.5.0.2.0.bff
-rw-rw-r-- 1 45776101 1 14133248 Apr 9 2002 vac.C.5.0.2.3.bff
-rw-rw-r-- 1 45776101 1 14173184 May 20 2002 vac.C.5.0.2.4.bff
-rw-rw-r-- 1 45776101 1 14192640 Nov 22 2002 vac.C.5.0.2.6.bff
# wget ftp://ftp.software.ibm.com/aix/fixes/v4/other/vac.C.5.0.2.6.bff
#
Likewise on all other OS levels. Then execute the following
command, and fill in its choices
# smit install_update
-> Install and Update from LATEST Available Software
* INPUT device / directory for software [ vac.C.5.0.2.6.bff ]
[ OK ]
[ OK ]
Follow the messages ... and you're done.
If you like a more web-like approach, a good start point can
be
http://www14.software.ibm.com/webapp/download/downloadaz.jsp
and click "C for AIX", and follow the instructions.
perl v5.12.5 Last change: 2012-11-03 8
Perl Programmers Reference Guide PERLAIX(1)
The usenm option
If linking miniperl
cc -o miniperl ... miniperlmain.o opmini.o perl.o ... -lm -lc ...
causes error like this
ld: 0711-317 ERROR: Undefined symbol: .aintl
ld: 0711-317 ERROR: Undefined symbol: .copysignl
ld: 0711-317 ERROR: Undefined symbol: .syscall
ld: 0711-317 ERROR: Undefined symbol: .eaccess
ld: 0711-317 ERROR: Undefined symbol: .setresuid
ld: 0711-317 ERROR: Undefined symbol: .setresgid
ld: 0711-317 ERROR: Undefined symbol: .setproctitle
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
you could retry with
make realclean
rm config.sh
./Configure -Dusenm ...
which makes Configure to use the "nm" tool when scanning for
library symbols, which usually is not done in AIX.
Related to this, you probably should not use the "-r" option
of Configure in AIX, because that affects of how the "nm"
tool is used.
Using GNU's gcc for building Perl
Using gcc-3.x (tested with 3.0.4, 3.1, and 3.2) now works
out of the box, as do recent gcc-2.9 builds available
directly from IBM as part of their Linux compatibility
packages, available here:
http://www.ibm.com/servers/aix/products/aixos/linux/
Using Large Files with Perl < 5L
Should yield no problems.
Threaded Perl < 5L
Threads seem to work OK, though at the moment not all tests
pass when threads are used in combination with 64-bit
configurations.
You may get a warning when doing a threaded build:
"pp_sys.c", line 4640.39: 1506-280 (W) Function argument assignment
between types "unsigned char*" and "const void*" is not allowed.
The exact line number may vary, but if the warning (W) comes
from a line line this
perl v5.12.5 Last change: 2012-11-03 9
Perl Programmers Reference Guide PERLAIX(1)
hent = PerlSock_gethostbyaddr(addr, (Netdb_hlen_t) addrlen, addrtype);
in the "pp_ghostent" function, you may ignore it safely.
The warning is caused by the reentrant variant of
gethostbyaddr() having a slightly different prototype than
its non-reentrant variant, but the difference is not really
significant here.
64-bit Perl < 5L
If your AIX is installed with 64-bit support, you can expect
64-bit configurations to work. In combination with threads
some tests might still fail.
AIX 4.2 and extensions using C++ with statics
In AIX 4.2 Perl extensions that use C++ functions that use
statics may have problems in that the statics are not
getting initialized. In newer AIX releases this has been
solved by linking Perl with the libC_r library, but
unfortunately in AIX 4.2 the said library has an obscure bug
where the various functions related to time (such as time()
and gettimeofday()) return broken values, and therefore in
AIX 4.2 Perl is not linked against the libC_r.
AUTHORS
H.Merijn Brand <[email protected]> Rainer Tammer
<[email protected]>
DATE
Version 5.12.1 / 2010-05-14
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/perl-512 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://www.cpan.org/src/5.0/perl-5.12.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.perl.org/.
perl v5.12.5 Last change: 2012-11-03 10