zshcontrib
(1)
Name
zshcontrib - user contributions to zsh
Synopsis
Please see following description for synopsis
Description
User Commands ZSHCONTRIB(1)
NAME
zshcontrib - user contributions to zsh
DESCRIPTION
The Zsh source distribution includes a number of items con-
tributed by the user community. These are not inherently a
part of the shell, and some may not be available in every
zsh installation. The most significant of these are docu-
mented here. For documentation on other contributed items
such as shell functions, look for comments in the function
source files.
UTILITIES
Accessing On-Line Help
The key sequence ESC h is normally bound by ZLE to execute
the run-help widget (see zshzle(1)). This invokes the
run-help command with the command word from the current
input line as its argument. By default, run-help is an
alias for the man command, so this often fails when the com-
mand word is a shell builtin or a user-defined function. By
redefining the run-help alias, one can improve the on-line
help provided by the shell.
The helpfiles utility, found in the Util directory of the
distribution, is a Perl program that can be used to process
the zsh manual to produce a separate help file for each
shell builtin and for many other shell features as well.
The autoloadable run-help function, found in Functions/Misc,
searches for these helpfiles and performs several other
tests to produce the most complete help possible for the
command.
There may already be a directory of help files on your sys-
tem; look in /usr/share/zsh or /usr/local/share/zsh and sub-
directories below those, or ask your system administrator.
To create your own help files with helpfiles, choose or cre-
ate a directory where the individual command help files will
reside. For example, you might choose ~/zsh_help. If you
unpacked the zsh distribution in your home directory, you
would use the commands:
mkdir ~/zsh_help
cd ~/zsh_help
man zshall | colcrt - | \
perl ~/zsh-5.0.5/Util/helpfiles
Next, to use the run-help function, you need to add lines
something like the following to your .zshrc or equivalent
startup file:
zsh 5.0.5 Last change: January 5, 2014 1
User Commands ZSHCONTRIB(1)
unalias run-help
autoload run-help
HELPDIR=~/zsh_help
The HELPDIR parameter tells run-help where to look for the
help files. If your system already has a help file direc-
tory installed, set HELPDIR to the path of that directory
instead.
Note that in order for `autoload run-help' to work, the
run-help file must be in one of the directories named in
your fpath array (see zshparam(1)). This should already be
the case if you have a standard zsh installation; if it is
not, copy Functions/Misc/run-help to an appropriate direc-
tory.
Recompiling Functions
If you frequently edit your zsh functions, or periodically
update your zsh installation to track the latest develop-
ments, you may find that function digests compiled with the
zcompile builtin are frequently out of date with respect to
the function source files. This is not usually a problem,
because zsh always looks for the newest file when loading a
function, but it may cause slower shell startup and function
loading. Also, if a digest file is explicitly used as an
element of fpath, zsh won't check whether any of its source
files has changed.
The zrecompile autoloadable function, found in Func-
tions/Misc, can be used to keep function digests up to date.
zrecompile [ -qt ] [ name ... ]
zrecompile [ -qt ] -p args [ -- args ... ]
This tries to find *.zwc files and automatically
re-compile them if at least one of the original files
is newer than the compiled file. This works only if
the names stored in the compiled files are full paths
or are relative to the directory that contains the .zwc
file.
In the first form, each name is the name of a compiled
file or a directory containing *.zwc files that should
be checked. If no arguments are given, the directories
and *.zwc files in fpath are used.
When -t is given, no compilation is performed, but a
return status of zero (true) is set if there are files
that need to be re-compiled and non-zero (false) other-
wise. The -q option quiets the chatty output that
describes what zrecompile is doing.
zsh 5.0.5 Last change: January 5, 2014 2
User Commands ZSHCONTRIB(1)
Without the -t option, the return status is zero if all
files that needed re-compilation could be compiled and
non-zero if compilation for at least one of the files
failed.
If the -p option is given, the args are interpreted as
one or more sets of arguments for zcompile, separated
by `--'. For example:
zrecompile -p \
-R ~/.zshrc -- \
-M ~/.zcompdump -- \
~/zsh/comp.zwc ~/zsh/Completion/*/_*
This compiles ~/.zshrc into ~/.zshrc.zwc if that
doesn't exist or if it is older than ~/.zshrc. The com-
piled file will be marked for reading instead of map-
ping. The same is done for ~/.zcompdump and ~/.zcomp-
dump.zwc, but this compiled file is marked for mapping.
The last line re-creates the file ~/zsh/comp.zwc if any
of the files matching the given pattern is newer than
it.
Without the -p option, zrecompile does not create func-
tion digests that do not already exist, nor does it add
new functions to the digest.
The following shell loop is an example of a method for cre-
ating function digests for all functions in your fpath,
assuming that you have write permission to the directories:
for ((i=1; i <= $#fpath; ++i)); do
dir=$fpath[i]
zwc=${dir:t}.zwc
if [[ $dir == (.|..) || $dir == (.|..)/* ]]; then
continue
fi
files=($dir/*(N-.))
if [[ -w $dir:h && -n $files ]]; then
files=(${${(M)files%/*/*}#/})
if ( cd $dir:h &&
zrecompile -p -U -z $zwc $files ); then
fpath[i]=$fpath[i].zwc
fi
fi
done
The -U and -z options are appropriate for functions in the
default zsh installation fpath; you may need to use differ-
ent options for your personal function directories.
zsh 5.0.5 Last change: January 5, 2014 3
User Commands ZSHCONTRIB(1)
Once the digests have been created and your fpath modified
to refer to them, you can keep them up to date by running
zrecompile with no arguments.
Keyboard Definition
The large number of possible combinations of keyboards,
workstations, terminals, emulators, and window systems makes
it impossible for zsh to have built-in key bindings for
every situation. The zkbd utility, found in Functions/Misc,
can help you quickly create key bindings for your configura-
tion.
Run zkbd either as an autoloaded function, or as a shell
script:
zsh -f ~/zsh-5.0.5/Functions/Misc/zkbd
When you run zkbd, it first asks you to enter your terminal
type; if the default it offers is correct, just press
return. It then asks you to press a number of different
keys to determine characteristics of your keyboard and ter-
minal; zkbd warns you if it finds anything out of the ordi-
nary, such as a Delete key that sends neither ^H nor ^?.
The keystrokes read by zkbd are recorded as a definition for
an associative array named key, written to a file in the
subdirectory .zkbd within either your HOME or ZDOTDIR direc-
tory. The name of the file is composed from the TERM, VEN-
DOR and OSTYPE parameters, joined by hyphens.
You may read this file into your .zshrc or another startup
file with the `source' or `.' commands, then reference the
key parameter in bindkey commands, like this:
source ${ZDOTDIR:-$HOME}/.zkbd/$TERM-$VENDOR-$OSTYPE
[[ -n ${key[Left]} ]] && bindkey "${key[Left]}" backward-char
[[ -n ${key[Right]} ]] && bindkey "${key[Right]}" forward-char
# etc.
Note that in order for `autoload zkbd' to work, the zkdb
file must be in one of the directories named in your fpath
array (see zshparam(1)). This should already be the case if
you have a standard zsh installation; if it is not, copy
Functions/Misc/zkbd to an appropriate directory.
Dumping Shell State
Occasionally you may encounter what appears to be a bug in
the shell, particularly if you are using a beta version of
zsh or a development release. Usually it is sufficient to
send a description of the problem to one of the zsh mailing
lists (see zsh(1)), but sometimes one of the zsh developers
will need to recreate your environment in order to track the
zsh 5.0.5 Last change: January 5, 2014 4
User Commands ZSHCONTRIB(1)
problem down.
The script named reporter, found in the Util directory of
the distribution, is provided for this purpose. (It is also
possible to autoload reporter, but reporter is not installed
in fpath by default.) This script outputs a detailed dump
of the shell state, in the form of another script that can
be read with `zsh -f' to recreate that state.
To use reporter, read the script into your shell with the
`.' command and redirect the output into a file:
. ~/zsh-5.0.5/Util/reporter > zsh.report
You should check the zsh.report file for any sensitive
information such as passwords and delete them by hand before
sending the script to the developers. Also, as the output
can be voluminous, it's best to wait for the developers to
ask for this information before sending it.
You can also use reporter to dump only a subset of the shell
state. This is sometimes useful for creating startup files
for the first time. Most of the output from reporter is far
more detailed than usually is necessary for a startup file,
but the aliases, options, and zstyles states may be useful
because they include only changes from the defaults. The
bindings state may be useful if you have created any of your
own keymaps, because reporter arranges to dump the keymap
creation commands as well as the bindings for every keymap.
As is usual with automated tools, if you create a startup
file with reporter, you should edit the results to remove
unnecessary commands. Note that if you're using the new
completion system, you should not dump the functions state
to your startup files with reporter; use the compdump func-
tion instead (see zshcompsys(1)).
reporter [ state ... ]
Print to standard output the indicated subset of the
current shell state. The state arguments may be one or
more of:
all Output everything listed below.
aliases
Output alias definitions.
bindings
Output ZLE key maps and bindings.
completion
Output old-style compctl commands. New completion
is covered by functions and zstyles.
functions
Output autoloads and function definitions.
zsh 5.0.5 Last change: January 5, 2014 5
User Commands ZSHCONTRIB(1)
limits
Output limit commands.
options
Output setopt commands.
styles
Same as zstyles.
variables
Output shell parameter assignments, plus export
commands for any environment variables.
zstyles
Output zstyle commands.
If the state is omitted, all is assumed.
With the exception of `all', every state can be abbreviated
by any prefix, even a single letter; thus a is the same as
aliases, z is the same as zstyles, etc.
Manipulating Hook Functions
add-zsh-hook [-dD] hook function
Several functions are special to the shell, as
described in the section SPECIAL FUNCTIONS, see zsh-
misc(1), in that they are automatic called at a spe-
cific point during shell execution. Each has an asso-
ciated array consisting of names of functions to be
called at the same point; these are so-called `hook
functions'. The shell function add-zsh-hook provides a
simple way of adding or removing functions from the
array.
hook is one of chpwd, periodic, precmd, preexec, zshad-
dhistory, zshexit, or zsh_directory_name, the special
functions in question. Note that zsh_directory_name is
called in a different way from the other functions, but
may still be manipulated as a hook.
function is name of an ordinary shell function. If no
options are given this will be added to the array of
functions to be executed in the given context.
If the option -d is given, the function is removed from
the array of functions to be executed.
If the option -D is given, the function is treated as a
pattern and any matching names of functions are removed
from the array of functions to be executed.
The options -U, -z and -k are passed as arguments to
autoload for function. For functions contributed with
zsh, the options -Uz are appropriate.
zsh 5.0.5 Last change: January 5, 2014 6
User Commands ZSHCONTRIB(1)
REMEMBERING RECENT DIRECTORIES
The function cdr allows you to change the working directory
to a previous working directory from a list maintained auto-
matically. It is similar in concept to the directory stack
controlled by the pushd, popd and dirs builtins, but is more
configurable, and as it stores all entries in files it is
maintained across sessions and (by default) between terminal
emulators in the current session. (The pushd directory
stack is not actually modified or used by cdr unless you
configure it to do so as described in the configuration sec-
tion below.)
Installation
The system works by means of a hook function that is called
every time the directory changes. To install the system,
autoload the required functions and use the add-zsh-hook
function described above:
autoload -Uz chpwd_recent_dirs cdr add-zsh-hook
add-zsh-hook chpwd chpwd_recent_dirs
Now every time you change directly interactively, no matter
which command you use, the directory to which you change
will be remembered in most-recent-first order.
Use
All direct user interaction is via the cdr function.
The argument to cdr is a number N corresponding to the Nth
most recently changed-to directory. 1 is the immediately
preceding directory; the current directory is remembered but
is not offered as a destination. Note that if you have mul-
tiple windows open 1 may refer to a directory changed to in
another window; you can avoid this by having per-terminal
files for storing directory as described for the
recent-dirs-file style below.
If you set the recent-dirs-default style described below cdr
will behave the same as cd if given a non-numeric argument,
or more than one argument. The recent directory list is
updated just the same however you change directory.
If the argument is omitted, 1 is assumed. This is similar
to pushd's behaviour of swapping the two most recent direc-
tories on the stack.
Completion for the argument to cdr is available if compinit
has been run; menu selection is recommended, using:
zstyle ':completion:*:*:cdr:*:*' menu selection
zsh 5.0.5 Last change: January 5, 2014 7
User Commands ZSHCONTRIB(1)
to allow you to cycle through recent directories; the order
is preserved, so the first choice is the most recent direc-
tory before the current one. The verbose style is also rec-
ommended to ensure the directory is shown; this style is on
by default so no action is required unless you have changed
it.
Options
The behaviour of cdr may be modified by the following
options.
-l lists the numbers and the corresponding directories in
abbreviated form (i.e. with ~ substitution reapplied),
one per line. The directories here are not quoted
(this would only be an issue if a directory name con-
tained a newline). This is used by the completion sys-
tem.
-r sets the variable reply to the current set of directo-
ries. Nothing is printed and the directory is not
changed.
-e allows you to edit the list of directories, one per
line. The list can be edited to any extent you like;
no sanity checking is performed. Completion is avail-
able. No quoting is necessary (except for newlines,
where I have in any case no sympathy); directories are
in unabbreviated from and contain an absolute path,
i.e. they start with /. Usually the first entry should
be left as the current directory.
Configuration
Configuration is by means of the styles mechanism that
should be familiar from completion; if not, see the descrip-
tion of the zstyle command in see zshmodules(1). The con-
text for setting styles should be ':chpwd:*' in case the
meaning of the context is extended in future, for example:
zstyle ':chpwd:*' recent-dirs-max 0
sets the value of the recent-dirs-max style to 0. In prac-
tice the style name is specific enough that a context of '*'
should be fine.
An exception is recent-dirs-insert, which is used exclu-
sively by the completion system and so has the usual comple-
tion system context (':completion:*' if nothing more spe-
cific is needed), though again '*' should be fine in prac-
tice.
recent-dirs-default
If true, and the command is expecting a recent
zsh 5.0.5 Last change: January 5, 2014 8
User Commands ZSHCONTRIB(1)
directory index, and either there is more than one
argument or the argument is not an integer, then fall
through to "cd". This allows the lazy to use only one
command for directory changing. Completion recognises
this, too; see recent-dirs-insert for how to control
completion when this option is in use.
recent-dirs-file
The file where the list of directories is saved. The
default is ${ZDOTDIR:-$HOME}/.chpwd-recent-dirs, i.e.
this is in your home directory unless you have set the
variable ZDOTDIR to point somewhere else. Directory
names are saved in $'...' quoted form, so each line in
the file can be supplied directly to the shell as an
argument.
The value of this style may be an array. In this case,
the first file in the list will always be used for sav-
ing directories while any other files are left
untouched. When reading the recent directory list, if
there are fewer than the maximum number of entries in
the first file, the contents of later files in the
array will be appended with duplicates removed from the
list shown. The contents of the two files are not
sorted together, i.e. all the entries in the first file
are shown first. The special value + can appear in the
list to indicate the default file should be read at
that point. This allows effects like the following:
zstyle ':chpwd:*' recent-dirs-file \
~/.chpwd-recent-dirs-${TTY##*/} +
Recent directories are read from a file numbered
according to the terminal. If there are insufficient
entries the list is supplemented from the default file.
It is possible to use zstyle -e to make the directory
configurable at run time:
zstyle -e ':chpwd:*' recent-dirs-file pick-recent-dirs-file
pick-recent-dirs-file() {
if [[ $PWD = ~/text/writing(|/*) ]]; then
reply=(~/.chpwd-recent-dirs-writing)
else
reply=(+)
fi
}
In this example, if the current directory is
~/text/writing or a directory under it, then use a spe-
cial file for saving recent directories, else use the
default.
zsh 5.0.5 Last change: January 5, 2014 9
User Commands ZSHCONTRIB(1)
recent-dirs-insert
Used by completion. If recent-dirs-default is true,
then setting this to true causes the actual directory,
rather than its index, to be inserted on the command
line; this has the same effect as using the correspond-
ing index, but makes the history clearer and the line
easier to edit. With this setting, if part of an argu-
ment was already typed, normal directory completion
rather than recent directory completion is done; this
is because recent directory completion is expected to
be done by cycling through entries menu fashion.
If the value of the style is always, then only recent
directories will be completed; in that case, use the cd
command when you want to complete other directories.
If the value is fallback, recent directories will be
tried first, then normal directory completion is per-
formed if recent directory completion failed to find a
match.
Finally, if the value is both then both sets of comple-
tions are presented; the usual tag mechanism can be
used to distinguish results, with recent directories
tagged as recent-dirs. Note that the recent directo-
ries inserted are abbreviated with directory names
where appropriate.
recent-dirs-max
The maximum number of directories to save to the file.
If this is zero or negative there is no maximum. The
default is 20. Note this includes the current direc-
tory, which isn't offered, so the highest number of
directories you will be offered is one less than the
maximum.
recent-dirs-prune
This style is an array determining what directories
should (or should not) be added to the recent list.
Elements of the array can include:
parent
Prune parents (more accurately, ancestors) from
the recent list. If present, changing directly
down by any number of directories causes the cur-
rent directory to be overwritten. For example,
changing from ~pws to ~pws/some/other/dir causes
~pws not to be left on the recent directory stack.
This only applies to direct changes to descendant
directories; earlier directories on the list are
not pruned. For example, changing from
~pws/yet/another to ~pws/some/other/dir does not
zsh 5.0.5 Last change: January 5, 2014 10
User Commands ZSHCONTRIB(1)
cause ~pws to be pruned.
pattern:pattern
Gives a zsh pattern for directories that should
not be added to the recent list (if not already
there). This element can be repeated to add dif-
ferent patterns. For example, 'pattern:/tmp(|/*)'
stops /tmp or its descendants from being added.
The EXTENDED_GLOB option is always turned on for
these patterns.
recent-dirs-pushd
If set to true, cdr will use pushd instead of cd to
change the directory, so the directory is saved on the
directory stack. As the directory stack is completely
separate from the list of files saved by the mechanism
used in this file there is no obvious reason to do
this.
Use with dynamic directory naming
It is possible to refer to recent directories using the
dynamic directory name syntax by using the supplied function
zsh_directory_name_cdr a hook:
autoload -Uz add-zsh-hook
add-zsh-hook -Uz zsh_directory_name zsh_directory_name_cdr
When this is done, ~[1] will refer to the most recent direc-
tory other than $PWD, and so on. Completion after ~[...
also works.
Details of directory handling
This section is for the curious or confused; most users will
not need to know this information.
Recent directories are saved to a file immediately and hence
are preserved across sessions. Note currently no file lock-
ing is applied: the list is updated immediately on interac-
tive commands and nowhere else (unlike history), and it is
assumed you are only going to change directory in one window
at once. This is not safe on shared accounts, but in any
case the system has limited utility when someone else is
changing to a different set of directories behind your back.
To make this a little safer, only directory changes insti-
tuted from the command line, either directly or indirectly
through shell function calls (but not through subshells,
evals, traps, completion functions and the like) are saved.
Shell functions should use cd -q or pushd -q to avoid side
effects if the change to the directory is to be invisible at
the command line. See the contents of the function
chpwd_recent_dirs for more details.
zsh 5.0.5 Last change: January 5, 2014 11
User Commands ZSHCONTRIB(1)
GATHERING INFORMATION FROM VERSION CONTROL SYSTEMS
In a lot of cases, it is nice to automatically retrieve
information from version control systems (VCSs), such as
subversion, CVS or git, to be able to provide it to the
user; possibly in the user's prompt. So that you can
instantly tell which branch you are currently on, for exam-
ple.
In order to do that, you may use the vcs_info function.
The following VCSs are supported, showing the abbreviated
name by which they are referred to within the system:
Bazaar (bzr)
http://bazaar-vcs.org/
Codeville (cdv)
http://codeville.org/
Concurrent Versioning System (cvs)
http://www.nongnu.org/cvs/
Darcs (darcs)
http://darcs.net/
Fossil (fossil)
http://fossil-scm.org/
Git (git)
http://git-scm.com/
GNU arch (tla)
http://www.gnu.org/software/gnu-arch/
Mercurial (hg)
http://mercurial.selenic.com/
Monotone (mtn)
http://monotone.ca/
Perforce (p4)
http://www.perforce.com/
Subversion (svn)
http://subversion.tigris.org/
SVK (svk)
http://svk.bestpractical.com/
There is also support for the patch management system quilt
(http://savannah.nongnu.org/projects/quilt). See Quilt Sup-
port below for details.
To load vcs_info:
autoload -Uz vcs_info
It can be used in any existing prompt, because it does not
require any specific $psvar entries to be available.
Quickstart
To get this feature working quickly (including colors), you
can do the following (assuming, you loaded vcs_info properly
- see above):
zsh 5.0.5 Last change: January 5, 2014 12
User Commands ZSHCONTRIB(1)
zstyle ':vcs_info:*' actionformats \
'%F{5}(%f%s%F{5})%F{3}-%F{5}[%F{2}%b%F{3}|%F{1}%a%F{5}]%f '
zstyle ':vcs_info:*' formats \
'%F{5}(%f%s%F{5})%F{3}-%F{5}[%F{2}%b%F{5}]%f '
zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat '%b%F{1}:%F{3}%r'
precmd () { vcs_info }
PS1='%F{5}[%F{2}%n%F{5}] %F{3}%3~ ${vcs_info_msg_0_}%f%# '
Obviously, the last two lines are there for demonstration.
You need to call vcs_info from your precmd function. Once
that is done you need a single quoted '${vcs_info_msg_0_}'
in your prompt.
To be able to use '${vcs_info_msg_0_}' directly in your
prompt like this, you will need to have the PROMPT_SUBST
option enabled.
Now call the vcs_info_printsys utility from the command
line:
% vcs_info_printsys
## list of supported version control backends:
## disabled systems are prefixed by a hash sign (#)
bzr
cdv
cvs
darcs
fossil
git
hg
mtn
p4
svk
svn
tla
## flavours (cannot be used in the enable or disable styles; they
## are enabled and disabled with their master [git-svn -> git])
## they *can* be used in contexts: ':vcs_info:git-svn:*'.
git-p4
git-svn
hg-git
hg-hgsubversion
hg-hgsvn
You may not want all of these because there is no point in
running the code to detect systems you do not use. So there
is a way to disable some backends altogether:
zstyle ':vcs_info:*' disable bzr cdv darcs mtn svk tla
You may also pick a few from that list and enable only
those:
zsh 5.0.5 Last change: January 5, 2014 13
User Commands ZSHCONTRIB(1)
zstyle ':vcs_info:*' enable git cvs svn
If you rerun vcs_info_printsys after one of these commands,
you will see the backends listed in the disable style (or
backends not in the enable style - if you used that) marked
as disabled by a hash sign. That means the detection of
these systems is skipped completely. No wasted time there.
Configuration
The vcs_info feature can be configured via zstyle.
First, the context in which we are working:
:vcs_info:vcs-string:user-context:repo-root-name
vcs-string
is one of: git, git-svn, git-p4, hg, hg-git, hg-hgsub-
version, hg-hgsvn, darcs, bzr, cdv, mtn, svn, cvs, svk,
tla, p4 or fossil. When hooks are active the hooks name
is added after a `+'. (See Hooks in vcs_info below.)
user-context
is a freely configurable string, assignable by the user
as the first argument to vcs_info (see its description
below).
repo-root-name
is the name of a repository in which you want a style
to match. So, if you want a setting specific to
/usr/src/zsh, with that being a CVS checkout, you can
set repo-root-name to zsh to make it so.
There are three special values for vcs-string: The first is
named -init-, that is in effect as long as there was no
decision what VCS backend to use. The second is -preinit-;
it is used before vcs_info is run, when initializing the
data exporting variables. The third special value is formats
and is used by the vcs_info_lastmsg for looking up its
styles.
The initial value of repo-root-name is -all- and it is
replaced with the actual name, as soon as it is known. Only
use this part of the context for defining the formats,
actionformats or branchformat styles, as it is guaranteed
that repo-root-name is set up correctly for these only. For
all other styles, just use '*' instead.
There are two pre-defined values for user-context:
default
the one used if none is specified
command
used by vcs_info_lastmsg to lookup its styles
zsh 5.0.5 Last change: January 5, 2014 14
User Commands ZSHCONTRIB(1)
You can of course use ':vcs_info:*' to match all VCSs in all
user-contexts at once.
This is a description of all styles that are looked up.
formats
A list of formats, used when actionformats is not used
(which is most of the time).
actionformats
A list of formats, used if there is a special action
going on in your current repository; like an interac-
tive rebase or a merge conflict.
branchformat
Some backends replace %b in the formats and actionfor-
mats styles above, not only by a branch name but also
by a revision number. This style lets you modify how
that string should look.
nvcsformats
These "formats" are exported when we didn't detect a
version control system for the current directory or
vcs_info was disabled. This is useful if you want
vcs_info to completely take over the generation of your
prompt. You would do something like
PS1='${vcs_info_msg_0_}' to accomplish that.
hgrevformat
hg uses both a hash and a revision number to reference
a specific changeset in a repository. With this style
you can format the revision string (see branchformat)
to include either or both. It's only useful when
get-revision is true. Note, the full 40-character revi-
sion id is not available (except when using the
use-simple option) because executing hg more than once
per prompt is too slow; you may customize this behavior
using hooks.
max-exports
Defines the maximum number of vcs_info_msg_*_ variables
vcs_info will export.
enable
A list of backends you want to use. Checked in the
-init- context. If this list contains an item called
NONE no backend is used at all and vcs_info will do
nothing. If this list contains ALL, vcs_info will use
all known backends. Only with ALL in enable will the
disable style have any effect. ALL and NONE are case
insensitive.
zsh 5.0.5 Last change: January 5, 2014 15
User Commands ZSHCONTRIB(1)
disable
A list of VCSs you don't want vcs_info to test for
repositories (checked in the -init- context, too). Only
used if enable contains ALL.
disable-patterns
A list of patterns that are checked against $PWD. If a
pattern matches, vcs_info will be disabled. This style
is checked in the :vcs_info:-init-:*:-all- context.
Say, ~/.zsh is a directory under version control, in
which you do not want vcs_info to be active, do:
zstyle ':vcs_info:*' disable-patterns "$HOME/.zsh(|/*)"
use-quilt
If enabled, the quilt support code is active in `addon'
mode. See Quilt Support for details.
quilt-standalone
If enabled, `standalone' mode detection is attempted if
no VCS is active in a given directory. See Quilt Sup-
port for details.
quilt-patch-dir
Overwrite the value of the $QUILT_PATCHES environment
variable. See Quilt Support for details.
quiltcommand
When quilt itself is called in quilt support the value
of this style is used as the command name.
check-for-changes
If enabled, this style causes the %c and %u format
escapes to show when the working directory has uncom-
mitted changes. The strings displayed by these escapes
can be controlled via the stagedstr and unstagedstr
styles. The only backends that currently support this
option are git and hg (hg only supports unstaged).
For this style to be evaluated with the hg backend, the
get-revision style needs to be set and the use-simple
style needs to be unset. The latter is the default; the
former is not.
Note, the actions taken if this style is enabled are
potentially expensive (read: they may be slow, depend-
ing on how big the current repository is). Therefore,
it is disabled by default.
stagedstr
This string will be used in the %c escape if there are
staged changes in the repository.
zsh 5.0.5 Last change: January 5, 2014 16
User Commands ZSHCONTRIB(1)
unstagedstr
This string will be used in the %u escape if there are
unstaged changes in the repository.
command
This style causes vcs_info to use the supplied string
as the command to use as the VCS's binary. Note, that
setting this in ':vcs_info:*' is not a good idea.
If the value of this style is empty (which is the
default), the used binary name is the name of the back-
end in use (e.g. svn is used in an svn repository).
The repo-root-name part in the context is always the
default -all- when this style is looked up.
For example, this style can be used to use binaries
from non-default installation directories. Assume, git
is installed in /usr/bin but your sysadmin installed a
newer version in /usr/bin/local. Instead of changing
the order of your $PATH parameter, you can do this:
zstyle ':vcs_info:git:*:-all-' command /usr/local/bin/git
use-server
This is used by the Perforce backend (p4) to decide if
it should contact the Perforce server to find out if a
directory is managed by Perforce. This is the only
reliable way of doing this, but runs the risk of a
delay if the server name cannot be found. If the
server (more specifically, the host:port pair describ-
ing the server) cannot be contacted, its name is put
into the associative array vcs_info_p4_dead_servers and
is not contacted again during the session until it is
removed by hand. If you do not set this style, the p4
backend is only usable if you have set the environment
variable P4CONFIG to a file name and have corresponding
files in the root directories of each Perforce client.
See comments in the function VCS_INFO_detect_p4 for
more detail.
use-simple
If there are two different ways of gathering informa-
tion, you can select the simpler one by setting this
style to true; the default is to use the not-that-sim-
ple code, which is potentially a lot slower but might
be more accurate in all possible cases. This style is
used by the bzr and hg backends. In the case of hg it
will invoke the external hexdump program to parse the
binary dirstate cache file; this method will not return
the local revision number.
get-revision
zsh 5.0.5 Last change: January 5, 2014 17
User Commands ZSHCONTRIB(1)
If set to true, vcs_info goes the extra mile to figure
out the revision of a repository's work tree (currently
for the git and hg backends, where this kind of infor-
mation is not always vital). For git, the hash value of
the currently checked out commit is available via the
%i expansion. With hg, the local revision number and
the corresponding global hash are available via %i.
get-mq
If set to true, the hg backend will look for a Mercu-
rial Queue (mq) patch directory. Information will be
available via the `%m' replacement.
get-bookmarks
If set to true, the hg backend will try to get a list
of current bookmarks. They will be available via the
`%m' replacement.
use-prompt-escapes
Determines if we assume that the assembled string from
vcs_info includes prompt escapes. (Used by
vcs_info_lastmsg.)
debug
Enable debugging output to track possible problems.
Currently this style is only used by vcs_info's hooks
system.
hooks
A list style that defines hook-function names. See
Hooks in vcs_info below for details.
The default values for these styles in all contexts are:
formats
" (%s)-[%b]%u%c-"
actionformats
" (%s)-[%b|%a]%u%c-"
branchformat
"%b:%r" (for bzr, svn, svk and hg)
nvcsformats
""
hgrevformat
"%r:%h"
max-exports
2
enable
ALL
disable
(empty list)
disable-patterns
(empty list)
zsh 5.0.5 Last change: January 5, 2014 18
User Commands ZSHCONTRIB(1)
check-for-changes
false
stagedstr
(string: "S")
unstagedstr
(string: "U")
command
(empty string)
use-server
false
use-simple
false
get-revision
false
get-mq
true
get-bookmarks
false
use-prompt-escapes
true
debug
false
hooks
(empty list)
use-quilt
false
quilt-standalone
false
quilt-patch-dir
empty - use $QUILT_PATCHES
quiltcommand
quilt
In normal formats and actionformats the following replace-
ments are done:
%s The VCS in use (git, hg, svn, etc.).
%b Information about the current branch.
%a An identifier that describes the action. Only makes
sense in actionformats.
%i The current revision number or identifier. For hg the
hgrevformat style may be used to customize the output.
%c The string from the stagedstr style if there are staged
changes in the repository.
%u The string from the unstagedstr style if there are
unstaged changes in the repository.
%R The base directory of the repository.
%r The repository name. If %R is /foo/bar/repoXY, %r is
repoXY.
%S A subdirectory within a repository. If $PWD is
/foo/bar/repoXY/beer/tasty, %S is beer/tasty.
%m A "misc" replacement. It is at the discretion of the
zsh 5.0.5 Last change: January 5, 2014 19
User Commands ZSHCONTRIB(1)
backend to decide what this replacement expands to. It
is currently used by the hg and git backends to display
patch information from the mq and stgit extensions.
In branchformat these replacements are done:
%b The branch name.
%r The current revision number or the hgrevformat style
for hg.
In hgrevformat these replacements are done:
%r The current local revision number.
%h The current global revision identifier.
In patch-format and nopatch-format these replacements are
done:
%p The name of the top-most applied patch
(applied-string).
%u The number of unapplied patches (unapplied-string).
%n The number of applied patches.
%c The number of unapplied patches.
%a The number of all patches.
%g The names of active mq guards (hg backend).
%G The number of active mq guards (hg backend).
Not all VCS backends have to support all replacements. For
nvcsformats no replacements are performed at all, it is just
a string.
Oddities
If you want to use the %b (bold off) prompt expansion in
formats, which expands %b itself, use %%b. That will cause
the vcs_info expansion to replace %%b with %b, so that zsh's
prompt expansion mechanism can handle it. Similarly, to hand
down %b from branchformat, use %%%%b. Sorry for this incon-
venience, but it cannot be easily avoided. Luckily we do not
clash with a lot of prompt expansions and this only needs to
be done for those.
Quilt Support
Quilt is not a version control system, therefore this is not
implemented as a backend. It can help keeping track of a
series of patches. People use it to keep a set of changes
they want to use on top of software packages (which is
tightly integrated into the package build process - the
Debian project does this for a large number of packages).
Quilt can also help individual developers keep track of
their own patches on top of real version control systems.
zsh 5.0.5 Last change: January 5, 2014 20
User Commands ZSHCONTRIB(1)
The vcs_info integration tries to support both ways of using
quilt by having two slightly different modes of operation:
`addon' mode and `standalone' mode).
For `addon' mode to become active vcs_info must have already
detected a real version control system controlling the
directory. If that is the case, a directory that holds
quilt's patches needs to be found. That directory is config-
urable via the `QUILT_PATCHES' environment variable. If that
variable exists its value is used, otherwise the value
`patches' is assumed. The value from $QUILT_PATCHES can be
overwritten using the `quilt-patches' style. (Note: you can
use vcs_info to keep the value of $QUILT_PATCHES correct all
the time via the post-quilt hook).
When the directory in question is found, quilt is assumed to
be active. To gather more information, vcs_info looks for a
directory called `.pc'; Quilt uses that directory to track
its current state. If this directory does not exist we know
that quilt has not done anything to the working directory
(read: no patches have been applied yet).
If patches are applied, vcs_info will try to find out which.
If you want to know which patches of a series are not yet
applied, you need to activate the get-unapplied style in the
appropriate context.
vcs_info allows for very detailed control over how the gath-
ered information is presented (see the below sections,
Styles and Hooks in vcs_info), all of which are documented
below. Note there are a number of other patch tracking sys-
tems that work on top of a certain version control system
(like stgit for git, or mq for hg); the configuration for
systems like that are generally configured the same way as
the quilt support.
If the quilt support is working in `addon' mode, the pro-
duced string is available as a simple format replacement (%Q
to be precise), which can be used in formats and actionfor-
mats; see below for details).
If, on the other hand, the support code is working in
`standalone' mode, vcs_info will pretend as if quilt were an
actual version control system. That means that the version
control system identifier (which otherwise would be some-
thing like `svn' or `cvs') will be set to `-quilt-'. This
has implications on the used style context where this iden-
tifier is the second element. vcs_info will have filled in a
proper value for the "repository's" root directory and the
string containing the information about quilt's state will
be available as the `misc' replacement (and %Q for compati-
bility with `addon' mode.
zsh 5.0.5 Last change: January 5, 2014 21
User Commands ZSHCONTRIB(1)
What is left to discuss is how `standalone' mode is
detected. The detection itself is a series of searches for
directories. You can have this detection enabled all the
time in every directory that is not otherwise under version
control. If you know there is only a limited set of trees
where you would like vcs_info to try and look for Quilt in
`standalone' mode to minimise the amount of searching on
every call to vcs_info, there are a number of ways to do
that:
Essentially, `standalone' mode detection is controlled by a
style called `quilt-standalone'. It is a string style and
its value can have different effects. The simplest values
are: `always' to run detection every time vcs_info is run,
and `never' to turn the detection off entirely.
If the value of quilt-standalone is something else, it is
interpreted differently. If the value is the name of a
scalar variable the value of that variable is checked and
that value is used in the same `always'/`never' way as
described above.
If the value of quilt-standalone is an array, the elements
of that array are used as directory names under which you
want the detection to be active.
If quilt-standalone is an associative array, the keys are
taken as directory names under which you want the detection
to be active, but only if the corresponding value is the
string `true'.
Last, but not least, if the value of quilt-standalone is the
name of a function, the function is called without arguments
and the return value decides whether detection should be
active. A `0' return value is true; a non-zero return value
is interpreted as false.
Note, if there is both a function and a variable by the name
of quilt-standalone, the function will take precedence.
Function Descriptions (Public API)
vcs_info [user-context]
The main function, that runs all backends and assembles
all data into ${vcs_info_msg_*_}. This is the function
you want to call from precmd if you want to include
up-to-date information in your prompt (see Variable
description below). If an argument is given, that
string will be used instead of default in the user-con-
text field of the style context.
vcs_info_hookadd
Statically registers a number of functions to a given
zsh 5.0.5 Last change: January 5, 2014 22
User Commands ZSHCONTRIB(1)
hook. The hook needs to be given as the first argument;
what follows is a list of hook-function names to regis-
ter to the hook. The `+vi-' prefix needs to be left out
here. See Hooks in vcs_info below for details.
vcs_info_hookdel
Remove hook-functions from a given hook. The hook needs
to be given as the first non-option argument; what fol-
lows is a list of hook-function names to un-register
from the hook. If `-a' is used as the first argument,
all occurances of the functions are unregistered. Oth-
erwise only the last occurance is removed (if a func-
tion was registered to a hook more than once) . The
`+vi-' prefix needs to be left out here. See Hooks in
vcs_info below for details.
vcs_info_lastmsg
Outputs the last ${vcs_info_msg_*_} value. Takes into
account the value of the use-prompt-escapes style in
':vcs_info:formats:command:-all-'. It also only prints
max-exports values.
vcs_info_printsys [user-context]
Prints a list of all supported version control systems.
Useful to find out possible contexts (and which of them
are enabled) or values for the disable style.
vcs_info_setsys
Initializes vcs_info's internal list of available back-
ends. With this function, you can add support for new
VCSs without restarting the shell.
All functions named VCS_INFO_* are for internal use only.
Variable Description
${vcs_info_msg_N_} (Note the trailing underscore)
Where N is an integer, e.g., vcs_info_msg_0_. These
variables are the storage for the informational message
the last vcs_info call has assembled. These are
strongly connected to the formats, actionformats and
nvcsformats styles described above. Those styles are
lists. The first member of that list gets expanded into
${vcs_info_msg_0_}, the second into ${vcs_info_msg_1_}
and the Nth into ${vcs_info_msg_N-1_}. These parameters
are exported into the environment. (See the max-exports
style above.)
All variables named VCS_INFO_* are for internal use only.
Hooks in vcs_info
Hooks are places in vcs_info where you can run your own
code. That code can communicate with the code that called it
zsh 5.0.5 Last change: January 5, 2014 23
User Commands ZSHCONTRIB(1)
and through that, change the system's behaviour.
For configuration, hooks change the style context:
:vcs_info:vcs-string+hook-name:user-context:repo-root-name
To register functions to a hook, you need to list them in
the hooks style in the appropriate context.
Example:
zstyle ':vcs_info:*+foo:*' hooks bar baz
This registers functions to the hook `foo' for all backends.
In order to avoid namespace problems, all registered func-
tion names are prepended by a `+vi-', so the actual func-
tions called for the `foo' hook are `+vi-bar' and `+vi-baz'.
If you would like to register a function to a hook regard-
less of the current context, you may use the
vcs_info_hookadd function. To remove a function that was
added like that, the vcs_info_hookdel function can be used.
If something seems weird, you can enable the `debug' boolean
style in the proper context and the hook-calling code will
print what it tried to execute and whether the function in
question existed.
When you register more than one function to a hook, all
functions are executed one after another until one function
returns non-zero or until all functions have been called.
Context-sensitive hook functions are executed before stati-
cally registered ones (the ones added by vcs_info_hookadd).
You may pass data between functions via an associative
array, user_data. For example:
+vi-git-myfirsthook(){
user_data[myval]=$myval
}
+vi-git-mysecondhook(){
# do something with ${user_data[myval]}
}
There are a number of variables that are special in hook
contexts:
ret The return value that the hooks system will return to
the caller. The default is an integer `zero'. If and
how a changed ret value changes the execution of the
caller depends on the specific hook. See the hook docu-
mentation below for details.
hook_com
zsh 5.0.5 Last change: January 5, 2014 24
User Commands ZSHCONTRIB(1)
An associated array which is used for bidirectional
communication from the caller to hook functions. The
used keys depend on the specific hook.
context
The active context of the hook. Functions that wish to
change this variable should make it local scope first.
vcs The current VCS after it was detected. The same values
as in the enable/disable style are used. Available in
all hooks except start-up.
Finally, the full list of currently available hooks:
start-up
Called after starting vcs_info but before the VCS in
this directory is determined. It can be used to deacti-
vate vcs_info temporarily if necessary. When ret is set
to 1, vcs_info aborts and does nothing; when set to 2,
vcs_info sets up everything as if no version control
were active and exits.
pre-get-data
Same as start-up but after the VCS was detected.
gen-hg-bookmark-string
Called in the Mercurial backend when a bookmark string
is generated; the get-revision and get-bookmarks styles
must be true.
This hook gets the names of the Mercurial bookmarks
that vcs_info collected from `hg'.
When setting ret to non-zero, the string in
${hook_com[hg-bookmark-string]} will be used in the %m
escape in formats and actionformats and will be avail-
abe in the global backend_misc array as ${back-
end_misc[bookmarks]}.
gen-applied-string
Called in the git (with stgit), and hg (with mq) back-
ends and in quilt support when the applied-string is
generated; the use-quilt zstyle must be true for quilt
(the mq and stgit backends are active by default).
This hook gets the names of all applied patches which
vcs_info collected so far in the opposite order, which
means that the first argument is the top-most patch and
so forth.
When setting ret to non-zero, the string in
${hook_com[applied-string]} will be used in the %m
zsh 5.0.5 Last change: January 5, 2014 25
User Commands ZSHCONTRIB(1)
escape in formats and actionformats; it will be avail-
able in the global backend_misc array as $back-
end_misc[patches]}; and it will be available as %p in
the patch-format and nopatch-format styles.
gen-unapplied-string
Called in the git (with stgit), and hg (with mq) back-
end and in quilt support when the unapplied-string is
generated; the get-unapplied style must be true.
This hook gets the names of all unapplied patches which
vcs_info collected so far in the opposite order, which
mean that the first argument is the patch next-in-line
to be applied and so forth.
When setting ret to non-zero, the string in
${hook_com[unapplied-string]} will be available as %u
in the patch-format and nopatch-format styles.
gen-mqguards-string
Called in the hg backend when guards-string is gener-
ated; the get-mq style must be true (default).
This hook gets the names of any active mq guards.
When setting ret to non-zero, the string in
${hook_com[guards-string]} will be used in the %g
escape in the patch-format and nopatch-format styles.
no-vcs
This hooks is called when no version control system was
detected.
The `hook_com' parameter is not used.
post-quilt
Called after the quilt support is done. The following
information is passed as arguments to the hook: 1. the
quilt-support mode (`addon' or `standalone'); 2. the
directory that contains the patch series; 3. the direc-
tory that holds quilt's status information (the `.pc'
directory) or the string "-nopc-" if that directory
wasn't found.
The `hook_com' parameter is not used.
set-branch-format
Called before `branchformat' is set. The only argument
to the hook is the format that is configured at this
point.
zsh 5.0.5 Last change: January 5, 2014 26
User Commands ZSHCONTRIB(1)
The `hook_com' keys considered are `branch' and `revi-
sion'. They are set to the values figured out so far
by vcs_info and any change will be used directly when
the actual replacement is done.
If ret is set to non-zero, the string in
${hook_com[branch-replace]} will be used unchanged as
the `%b' replacement in the variables set by vcs_info.
set-hgrev-format
Called before a `hgrevformat' is set. The only argument
to the hook is the format that is configured at this
point.
The `hook_com' keys considered are `hash' and `local-
rev'. They are set to the values figured out so far by
vcs_info and any change will be used directly when the
actual replacement is done.
If ret is set to non-zero, the string in
${hook_com[rev-replace]} will be used unchanged as the
`%i' replacement in the variables set by vcs_info.
set-message
Called each time before a `vcs_info_msg_N_' message is
set. It takes two arguments; the first being the `N'
in the message variable name, the second is the cur-
rently configured formats or actionformats.
There are a number of `hook_com' keys, that are used
here: `action', `branch', `base', `base-name', `sub-
dir', `staged', `unstaged', `revision', `misc', `vcs'
and one `miscN' entry for each backend-specific data
field (N starting at zero). They are set to the values
figured out so far by vcs_info and any change will be
used directly when the actual replacement is done.
Since this hook is triggered multiple times (once for
each configured formats or actionformats), each of the
`hook_com' keys mentioned above (except for the miscN
entries) has an `_orig' counterpart, so even if you
changed a value to your liking you can still get the
original value in the next run. Changing the `_orig'
values is probably not a good idea.
If ret is set to non-zero, the string in
${hook_com[message]} will be used unchanged as the mes-
sage by vcs_info.
If all of this sounds rather confusing, take a look at the
Examples section below and also in the Misc/vcs_info-exam-
ples file in the Zsh source. They contain some explanatory
zsh 5.0.5 Last change: January 5, 2014 27
User Commands ZSHCONTRIB(1)
code.
Examples
Don't use vcs_info at all (even though it's in your prompt):
zstyle ':vcs_info:*' enable NONE
Disable the backends for bzr and svk:
zstyle ':vcs_info:*' disable bzr svk
Disable everything but bzr and svk:
zstyle ':vcs_info:*' enable bzr svk
Provide a special formats for git:
zstyle ':vcs_info:git:*' formats ' GIT, BABY! [%b]'
zstyle ':vcs_info:git:*' actionformats ' GIT ACTION! [%b|%a]'
All %x expansion in all sorts of formats ("formats",
"actionformats", branchformat, you name it) are done using
the `zformat' builtin from the `zsh/zutil' module. That
means you can do everything with these %x items what zformat
supports. In particular, if you want something that is
really long to have a fixed width, like a hash in a mercu-
rial branchformat, you can do this: %12.12i. That'll shrink
the 40 character hash to its 12 leading characters. The form
is actually `%min.maxx'. More is possible. See the section
`The zsh/zutil Module' in zshmodules(1) for details.
Use the quicker bzr backend
zstyle ':vcs_info:bzr:*' use-simple true
If you do use use-simple, please report if it does
`the-right-thing[tm]'.
Display the revision number in yellow for bzr and svn:
zstyle ':vcs_info:(svn|bzr):*' branchformat '%b%{'${fg[yellow]}'%}:%r'
If you want colors, make sure you enclose the color codes in
%{...%} if you want to use the string provided by vcs_info
in prompts.
Here is how to print the VCS information as a command (not
in a prompt):
alias vcsi='vcs_info command; vcs_info_lastmsg'
This way, you can even define different formats for output
via vcs_info_lastmsg in the ':vcs_info:*:command:*' names-
pace.
Now as promised, some code that uses hooks: say, you'd like
to replace the string `svn' by `subversion' in vcs_info's %s
formats replacement.
zsh 5.0.5 Last change: January 5, 2014 28
User Commands ZSHCONTRIB(1)
First, we will tell vcs_info to call a function when popu-
lating the message variables with the gathered information:
zstyle ':vcs_info:*+set-message:*' hooks svn2subversion
Nothing happens. Which is reasonable, since we didn't define
the actual function yet. To see what the hooks subsystem is
trying to do, enable the `debug' style:
zstyle ':vcs_info:*+*:*' debug true
That should give you an idea what is going on. Specifically,
the function that we are looking for is `+vi-svn2subver-
sion'. Note, the `+vi-' prefix. So, everything is in order,
just as documented. When you are done checking out the
debugging output, disable it again:
zstyle ':vcs_info:*+*:*' debug false
Now, let's define the function:
function +vi-svn2subversion() {
[[ ${hook_com[vcs_orig]} == svn ]] && hook_com[vcs]=subversion
}
Simple enough. And it could have even been simpler, if only
we had registered our function in a less generic context. If
we do it only in the `svn' backend's context, we don't need
to test which the active backend is:
zstyle ':vcs_info:svn+set-message:*' hooks svn2subversion
function +vi-svn2subversion() {
hook_com[vcs]=subversion
}
And finally a little more elaborate example, that uses a
hook to create a customised bookmark string for the hg back-
end.
Again, we start off by registering a function:
zstyle ':vcs_info:hg+gen-hg-bookmark-string:*' hooks hgbookmarks
And then we define the `+vi-hgbookmarks function:
function +vi-hgbookmarks() {
# The default is to connect all bookmark names by
# commas. This mixes things up a little.
# Imagine, there's one type of bookmarks that is
# special to you. Say, because it's *your* work.
# Those bookmarks look always like this: "sh/*"
# (because your initials are sh, for example).
# This makes the bookmarks string use only those
# bookmarks. If there's more than one, it
# concatenates them using commas.
local s i
zsh 5.0.5 Last change: January 5, 2014 29
User Commands ZSHCONTRIB(1)
# The bookmarks returned by `hg' are available in
# the functions positional parameters.
(( $# == 0 )) && return 0
for i in "$@"; do
if [[ $i == sh/* ]]; then
[[ -n $s ]] && s=$s,
s=${s}$i
fi
done
# Now, the communication with the code that calls
# the hook functions is done via the hook_com[]
# hash. The key, at which the `gen-hg-bookmark-string'
# hook looks at is `hg-bookmark-string'. So:
hook_com[hg-bookmark-string]=$s
# And to signal, that we want to use the sting we
# just generated, set the special variable `ret' to
# something other than the default zero:
ret=1
return 0
}
Some longer examples and code snippets which might be useful
are available in the examples file located at
Misc/vcs_info-examples in the Zsh source directory.
This concludes our guided tour through zsh's vcs_info.
PROMPT THEMES
Installation
You should make sure all the functions from the Func-
tions/Prompts directory of the source distribution are
available; they all begin with the string `prompt_' except
for the special function`promptinit'. You also need the
`colors' function from Functions/Misc. All of these func-
tions may already have been installed on your system; if
not, you will need to find them and copy them. The direc-
tory should appear as one of the elements of the fpath array
(this should already be the case if they were installed),
and at least the function promptinit should be autoloaded;
it will autoload the rest. Finally, to initialize the use
of the system you need to call the promptinit function. The
following code in your .zshrc will arrange for this; assume
the functions are stored in the directory ~/myfns:
fpath=(~/myfns $fpath)
autoload -U promptinit
promptinit
Theme Selection
Use the prompt command to select your preferred theme. This
command may be added to your .zshrc following the call to
zsh 5.0.5 Last change: January 5, 2014 30
User Commands ZSHCONTRIB(1)
promptinit in order to start zsh with a theme already
selected.
prompt [ -c | -l ]
prompt [ -p | -h ] [ theme ... ]
prompt [ -s ] theme [ arg ... ]
Set or examine the prompt theme. With no options and a
theme argument, the theme with that name is set as the
current theme. The available themes are determined at
run time; use the -l option to see a list. The special
theme `random' selects at random one of the available
themes and sets your prompt to that.
In some cases the theme may be modified by one or more
arguments, which should be given after the theme name.
See the help for each theme for descriptions of these
arguments.
Options are:
-c Show the currently selected theme and its parame-
ters, if any.
-l List all available prompt themes.
-p Preview the theme named by theme, or all themes if
no theme is given.
-h Show help for the theme named by theme, or for the
prompt function if no theme is given.
-s Set theme as the current theme and save state.
prompt_theme_setup
Each available theme has a setup function which is
called by the prompt function to install that theme.
This function may define other functions as necessary
to maintain the prompt, including functions used to
preview the prompt or provide help for its use. You
should not normally call a theme's setup function
directly.
ZLE FUNCTIONS
Widgets
These functions all implement user-defined ZLE widgets (see
zshzle(1)) which can be bound to keystrokes in interactive
shells. To use them, your .zshrc should contain lines of
the form
autoload function
zle -N function
followed by an appropriate bindkey command to associate the
function with a key sequence. Suggested bindings are
described below.
zsh 5.0.5 Last change: January 5, 2014 31
User Commands ZSHCONTRIB(1)
bash-style word functions
If you are looking for functions to implement moving
over and editing words in the manner of bash, where
only alphanumeric characters are considered word char-
acters, you can use the functions described in the next
section. The following is sufficient:
autoload -U select-word-style
select-word-style bash
forward-word-match, backward-word-match
kill-word-match, backward-kill-word-match
transpose-words-match, capitalize-word-match
up-case-word-match, down-case-word-match
select-word-style, match-word-context, match-words-by-style
The eight `-match' functions are drop-in replacements
for the builtin widgets without the suffix. By default
they behave in a similar way. However, by the use of
styles and the function select-word-style, the way
words are matched can be altered.
The simplest way of configuring the functions is to use
select-word-style, which can either be called as a nor-
mal function with the appropriate argument, or invoked
as a user-defined widget that will prompt for the first
character of the word style to be used. The first time
it is invoked, the eight -match functions will automat-
ically replace the builtin versions, so they do not
need to be loaded explicitly.
The word styles available are as follows. Only the
first character is examined.
bash Word characters are alphanumeric characters only.
normal
As in normal shell operation: word characters are
alphanumeric characters plus any characters
present in the string given by the parameter
$WORDCHARS.
shell
Words are complete shell command arguments, possi-
bly including complete quoted strings, or any
tokens special to the shell.
whitespace
Words are any set of characters delimited by
whitespace.
default
Restore the default settings; this is usually the
zsh 5.0.5 Last change: January 5, 2014 32
User Commands ZSHCONTRIB(1)
same as `normal'.
All but `default' can be input as an upper case charac-
ter, which has the same effect but with subword match-
ing turned on. In this case, words with upper case
characters are treated specially: each separate run of
upper case characters, or an upper case character fol-
lowed by any number of other characters, is considered
a word. The style subword-range can supply an alterna-
tive character range to the default `[:upper:]'; the
value of the style is treated as the contents of a
`[...]' pattern (note that the outer brackets should
not be supplied, only those surrounding named ranges).
More control can be obtained using the zstyle command,
as described in zshmodules(1). Each style is looked up
in the context :zle:widget where widget is the name of
the user-defined widget, not the name of the function
implementing it, so in the case of the definitions sup-
plied by select-word-style the appropriate contexts are
:zle:forward-word, and so on. The function
select-word-style itself always defines styles for the
context `:zle:*' which can be overridden by more spe-
cific (longer) patterns as well as explicit contexts.
The style word-style specifies the rules to use. This
may have the following values.
normal
Use the standard shell rules, i.e. alphanumerics
and $WORDCHARS, unless overridden by the styles
word-chars or word-class.
specified
Similar to normal, but only the specified charac-
ters, and not also alphanumerics, are considered
word characters.
unspecified
The negation of specified. The given characters
are those which will not be considered part of a
word.
shell
Words are obtained by using the syntactic rules
for generating shell command arguments. In addi-
tion, special tokens which are never command argu-
ments such as `()' are also treated as words.
whitespace
Words are whitespace-delimited strings of charac-
ters.
zsh 5.0.5 Last change: January 5, 2014 33
User Commands ZSHCONTRIB(1)
The first three of those rules usually use $WORDCHARS,
but the value in the parameter can be overridden by the
style word-chars, which works in exactly the same way
as $WORDCHARS. In addition, the style word-class uses
character class syntax to group characters and takes
precedence over word-chars if both are set. The
word-class style does not include the surrounding
brackets of the character class; for example,
`-:[:alnum:]' is a valid word-class to include all
alphanumerics plus the characters `-' and `:'. Be
careful including `]', `^' and `-' as these are special
inside character classes.
word-style may also have `-subword' appended to its
value to turn on subword matching, as described above.
The style skip-chars is mostly useful for trans-
pose-words and similar functions. If set, it gives a
count of characters starting at the cursor position
which will not be considered part of the word and are
treated as space, regardless of what they actually are.
For example, if
zstyle ':zle:transpose-words' skip-chars 1
has been set, and transpose-words-match is called with
the cursor on the X of fooXbar, where X can be any
character, then the resulting expression is barXfoo.
Finer grained control can be obtained by setting the
style word-context to an array of pairs of entries.
Each pair of entries consists of a pattern and a sub-
context. The shell argument the cursor is on is
matched against each pattern in turn until one matches;
if it does, the context is extended by a colon and the
corresponding subcontext. Note that the test is made
against the original word on the line, with no strip-
ping of quotes. Special handling is done between
words: the current context is examined and if it con-
tains the string back, the word before the cursor is
considered, else the word after cursor is considered.
Some examples are given below.
The style skip-whitespace-first is only used with the
forward-word widget. If it is set to true, then for-
ward-word skips any non-word-characters, followed by
any non-word-characters: this is similar to the behav-
iour of other word-orientated widgets, and also that
used by other editors, however it differs from the
standard zsh behaviour. When using select-word-style
the widget is set in the context :zle:* to true if the
word style is bash and false otherwise. It may be
zsh 5.0.5 Last change: January 5, 2014 34
User Commands ZSHCONTRIB(1)
overridden by setting it in the more specific context
:zle:forward-word*.
Here are some examples of use of the styles, actually
taken from the simplified interface in
select-word-style:
zstyle ':zle:*' word-style standard
zstyle ':zle:*' word-chars ''
Implements bash-style word handling for all widgets,
i.e. only alphanumerics are word characters; equivalent
to setting the parameter WORDCHARS empty for the given
context.
style ':zle:*kill*' word-style space
Uses space-delimited words for widgets with the word
`kill' in the name. Neither of the styles word-chars
nor word-class is used in this case.
Here are some examples of use of the word-context style
to extend the context.
zstyle ':zle:*' word-context "*/*" file "[[:space:]]" whitespace
zstyle ':zle:transpose-words:whitespace' word-style shell
zstyle ':zle:transpose-words:filename' word-style normal
zstyle ':zle:transpose-words:filename' word-chars ''
This provides two different ways of using trans-
pose-words depending on whether the cursor is on white-
space between words or on a filename, here any word
containing a /. On whitespace, complete arguments as
defined by standard shell rules will be transposed. In
a filename, only alphanumerics will be transposed.
Elsewhere, words will be transposed using the default
style for :zle:transpose-words.
The word matching and all the handling of zstyle set-
tings is actually implemented by the function
match-words-by-style. This can be used to create new
user-defined widgets. The calling function should set
the local parameter curcontext to :zle:widget, create
the local parameter matched_words and call
match-words-by-style with no arguments. On return,
matched_words will be set to an array with the ele-
ments: (1) the start of the line (2) the word before
the cursor (3) any non-word characters between that
word and the cursor (4) any non-word character at the
cursor position plus any remaining non-word characters
before the next word, including all characters speci-
fied by the skip-chars style, (5) the word at or
zsh 5.0.5 Last change: January 5, 2014 35
User Commands ZSHCONTRIB(1)
following the cursor (6) any non-word characters fol-
lowing that word (7) the remainder of the line. Any of
the elements may be an empty string; the calling func-
tion should test for this to decide whether it can per-
form its function.
It is possible to pass options with arguments to
match-words-by-style to override the use of styles.
The options are:
-w word-style
-s skip-chars
-c word-class
-C word-chars
-r subword-range
For example, match-words-by-style -w shell -c 0 may be
used to extract the command argument around the cursor.
The word-context style is implemented by the function
match-word-context. This should not usually need to be
called directly.
copy-earlier-word
This widget works like a combination of
insert-last-word and copy-prev-shell-word. Repeated
invocations of the widget retrieve earlier words on the
relevant history line. With a numeric argument N,
insert the Nth word from the history line; N may be
negative to count from the end of the line.
If insert-last-word has been used to retrieve the last
word on a previous history line, repeated invocations
will replace that word with earlier words from the same
line.
Otherwise, the widget applies to words on the line cur-
rently being edited. The widget style can be set to
the name of another widget that should be called to
retrieve words. This widget must accept the same three
arguments as insert-last-word.
cycle-completion-positions
After inserting an unambiguous string into the command
line, the new function based completion system may know
about multiple places in this string where characters
are missing or differ from at least one of the possible
matches. It will then place the cursor on the position
it considers to be the most interesting one, i.e. the
one where one can disambiguate between as many matches
as possible with as little typing as possible.
zsh 5.0.5 Last change: January 5, 2014 36
User Commands ZSHCONTRIB(1)
This widget allows the cursor to be easily moved to the
other interesting spots. It can be invoked repeatedly
to cycle between all positions reported by the comple-
tion system.
delete-whole-word-match
This is another function which works like the -match
functions described immediately above, i.e. using
styles to decide the word boundaries. However, it is
not a replacement for any existing function.
The basic behaviour is to delete the word around the
cursor. There is no numeric prefix handling; only the
single word around the cursor is considered. If the
widget contains the string kill, the removed text will
be placed in the cutbuffer for future yanking. This
can be obtained by defining kill-whole-word-match as
follows:
zle -N kill-whole-word-match delete-whole-word-match
and then binding the widget kill-whole-word-match.
up-line-or-beginning-search, down-line-or-beginning-search
These widgets are similar to the builtin functions
up-line-or-search and down-line-or-search: if in a
multiline buffer they move up or down within the
buffer, otherwise they search for a history line match-
ing the start of the current line. In this case, how-
ever, they search for a line which matches the current
line up to the current cursor position, in the manner
of history-beginning-search-backward and -forward,
rather than the first word on the line.
edit-command-line
Edit the command line using your visual editor, as in
ksh.
bindkey -M vicmd v edit-command-line
history-search-end
This function implements the widgets history-begin-
ning-search-backward-end and history-begin-
ning-search-forward-end. These commands work by first
calling the corresponding builtin widget (see `History
Control' in zshzle(1)) and then moving the cursor to
the end of the line. The original cursor position is
remembered and restored before calling the builtin wid-
get a second time, so that the same search is repeated
to look farther through the history.
zsh 5.0.5 Last change: January 5, 2014 37
User Commands ZSHCONTRIB(1)
Although you autoload only one function, the commands
to use it are slightly different because it implements
two widgets.
zle -N history-beginning-search-backward-end \
history-search-end
zle -N history-beginning-search-forward-end \
history-search-end
bindkey '\e^P' history-beginning-search-backward-end
bindkey '\e^N' history-beginning-search-forward-end
history-beginning-search-menu
This function implements yet another form of history
searching. The text before the cursor is used to
select lines from the history, as for history-begin-
ning-search-backward except that all matches are shown
in a numbered menu. Typing the appropriate digits
inserts the full history line. Note that leading
zeroes must be typed (they are only shown when neces-
sary for removing ambiguity). The entire history is
searched; there is no distinction between forwards and
backwards.
With a prefix argument, the search is not anchored to
the start of the line; the string typed by the use may
appear anywhere in the line in the history.
If the widget name contains `-end' the cursor is moved
to the end of the line inserted. If the widget name
contains `-space' any space in the text typed is
treated as a wildcard and can match anything (hence a
leading space is equivalent to giving a prefix argu-
ment). Both forms can be combined, for example:
zle -N history-beginning-search-menu-space-end \
history-beginning-search-menu
history-pattern-search
The function history-pattern-search implements widgets
which prompt for a pattern with which to search the
history backwards or forwards. The pattern is in the
usual zsh format, however the first character may be ^
to anchor the search to the start of the line, and the
last character may be $ to anchor the search to the end
of the line. If the search was not anchored to the end
of the line the cursor is positioned just after the
pattern found.
The commands to create bindable widgets are similar to
those in the example immediately above:
zsh 5.0.5 Last change: January 5, 2014 38
User Commands ZSHCONTRIB(1)
autoload -U history-pattern-search
zle -N history-pattern-search-backward history-pattern-search
zle -N history-pattern-search-forward history-pattern-search
incarg
Typing the keystrokes for this widget with the cursor
placed on or to the left of an integer causes that
integer to be incremented by one. With a numeric pre-
fix argument, the number is incremented by the amount
of the argument (decremented if the prefix argument is
negative). The shell parameter incarg may be set to
change the default increment to something other than
one.
bindkey '^X+' incarg
incremental-complete-word
This allows incremental completion of a word. After
starting this command, a list of completion choices can
be shown after every character you type, which you can
delete with ^H or DEL. Pressing return accepts the
completion so far and returns you to normal editing
(that is, the command line is not immediately exe-
cuted). You can hit TAB to do normal completion, ^G to
abort back to the state when you started, and ^D to
list the matches.
This works only with the new function based completion
system.
bindkey '^Xi' incremental-complete-word
insert-composed-char
This function allows you to compose characters that
don't appear on the keyboard to be inserted into the
command line. The command is followed by two keys cor-
responding to ASCII characters (there is no prompt).
For accented characters, the two keys are a base char-
acter followed by a code for the accent, while for
other special characters the two characters together
form a mnemonic for the character to be inserted. The
two-character codes are a subset of those given by RFC
1345 (see for example
http://www.faqs.org/rfcs/rfc1345.html).
The function may optionally be followed by up to two
characters which replace one or both of the characters
read from the keyboard; if both characters are sup-
plied, no input is read. For example, insert-com-
posed-char a: can be used within a widget to insert an
a with umlaut into the command line. This has the
advantages over use of a literal character that it is
zsh 5.0.5 Last change: January 5, 2014 39
User Commands ZSHCONTRIB(1)
more portable.
For best results zsh should have been built with sup-
port for multibyte characters (configured with
--enable-multibyte); however, the function works for
the limited range of characters available in sin-
gle-byte character sets such as ISO-8859-1.
The character is converted into the local representa-
tion and inserted into the command line at the cursor
position. (The conversion is done within the shell,
using whatever facilities the C library provides.)
With a numeric argument, the character and its code are
previewed in the status line
The function may be run outside zle in which case it
prints the character (together with a newline) to stan-
dard output. Input is still read from keystrokes.
See insert-unicode-char for an alternative way of
inserting Unicode characters using their hexadecimal
character number.
The set of accented characters is reasonably complete
up to Unicode character U+0180, the set of special
characters less so. However, it is very sporadic from
that point. Adding new characters is easy, however;
see the function define-composed-chars. Please send
any additions to [email protected].
The codes for the second character when used to accent
the first are as follows. Note that not every charac-
ter can take every accent.
! Grave.
' Acute.
> Circumflex.
? Tilde. (This is not ~ as RFC 1345 does not assume
that character is present on the keyboard.)
- Macron. (A horizontal bar over the base charac-
ter.)
( Breve. (A shallow dish shape over the base char-
acter.)
. Dot above the base character, or in the case of i
no dot, or in the case of L and l a centered dot.
: Diaeresis (Umlaut).
c Cedilla.
_ Underline, however there are currently no under-
lined characters.
/ Stroke through the base character.
" Double acute (only supported on a few letters).
; Ogonek. (A little forward facing hook at the bot-
tom right of the character.)
zsh 5.0.5 Last change: January 5, 2014 40
User Commands ZSHCONTRIB(1)
< Caron. (A little v over the letter.)
0 Circle over the base character.
2 Hook over the base character.
9 Horn over the base character.
The most common characters from the Arabic, Cyrillic,
Greek and Hebrew alphabets are available; consult RFC
1345 for the appropriate sequences. In addition, a set
of two letter codes not in RFC 1345 are available for
the double-width characters corresponding to ASCII
characters from ! to ~ (0x21 to 0x7e) by preceding the
character with ^, for example ^A for a double-width A.
The following other two-character sequences are under-
stood.
ASCII characters
These are already present on most keyboards:
<( Left square bracket
// Backslash (solidus)
)> Right square bracket
(! Left brace (curly bracket)
!! Vertical bar (pipe symbol)
!) Right brace (curly bracket)
'? Tilde
Special letters
Characters found in various variants of the Latin
alphabet:
ss Eszett (scharfes S)
D-, d-
Eth
TH, th
Thorn
kk Kra
'n 'n
NG, ng
Ng
OI, oi
Oi
yr yr
ED ezh
Currency symbols
Ct Cent
Pd Pound sterling (also lira and others)
Cu Currency
Ye Yen
Eu Euro (N.B. not in RFC 1345)
Punctuation characters
References to "right" quotes indicate the shape
zsh 5.0.5 Last change: January 5, 2014 41
User Commands ZSHCONTRIB(1)
(like a 9 rather than 6) rather than their gram-
matical use. (For example, a "right" low double
quote is used to open quotations in German.)
!I Inverted exclamation mark
BB Broken vertical bar
SE Section
Co Copyright
-a Spanish feminine ordinal indicator
<< Left guillemet
-- Soft hyphen
Rg Registered trade mark
PI Pilcrow (paragraph)
-o Spanish masculine ordinal indicator
>> Right guillemet
?I Inverted question mark
-1 Hyphen
-N En dash
-M Em dash
-3 Horizontal bar
:3 Vertical ellipsis
.3 Horizontal midline ellipsis
!2 Double vertical line
=2 Double low line
'6 Left single quote
'9 Right single quote
.9 "Right" low quote
9' Reversed "right" quote
"6 Left double quote
"9 Right double quote
:9 "Right" low double quote
9" Reversed "right" double quote
/- Dagger
/= Double dagger
Mathematical symbols
DG Degree
-2, +-, -+
- sign, +/- sign, -/+ sign
2S Superscript 2
3S Superscript 3
1S Superscript 1
My Micro
.M Middle dot
14 Quarter
12 Half
34 Three quarters
*X Multiplication
-: Division
%0 Per mille
FA, TE, /0
For all, there exists, empty set
dP, DE, NB
zsh 5.0.5 Last change: January 5, 2014 42
User Commands ZSHCONTRIB(1)
Partial derivative, delta (increment), del (nabla)
(-, -)
Element of, contains
*P, +Z
Product, sum
*-, Ob, Sb
Asterisk, ring, bullet
RT, 0(, 00
Root sign, proportional to, infinity
Other symbols
cS, cH, cD, cC
Card suits: spades, hearts, diamonds, clubs
Md, M8, M2, Mb, Mx, MX
Musical notation: crotchet (quarter note), quaver
(eighth note), semiquavers (sixteenth notes), flag
sign, natural sign, sharp sign
Fm, Ml
Female, male
Accents on their own
'> Circumflex (same as caret, ^)
'! Grave (same as backtick, `)
', Cedilla
': Diaeresis (Umlaut)
'm Macron
'' Acute
insert-files
This function allows you type a file pattern, and see
the results of the expansion at each step. When you
hit return, all expansions are inserted into the com-
mand line.
bindkey '^Xf' insert-files
insert-unicode-char
When first executed, the user inputs a set of hexadeci-
mal digits. This is terminated with another call to
insert-unicode-char. The digits are then turned into
the corresponding Unicode character. For example, if
the widget is bound to ^XU, the character sequence `^XU
4 c ^XU' inserts L (Unicode U+004c).
See insert-composed-char for a way of inserting charac-
ters using a two-character mnemonic.
narrow-to-region [ -p pre ] [ -P post ]
[ -S statepm | -R statepm ] [ -n ] [ start end ])
narrow-to-region-invisible
Narrow the editable portion of the buffer to the region
between the cursor and the mark, which may be in either
zsh 5.0.5 Last change: January 5, 2014 43
User Commands ZSHCONTRIB(1)
order. The region may not be empty.
narrow-to-region may be used as a widget or called as a
function from a user-defined widget; by default, the
text outside the editable area remains visible. A
recursive-edit is performed and the original widening
status is then restored. Various options and arguments
are available when it is called as a function.
The options -p pretext and -P posttext may be used to
replace the text before and after the display for the
duration of the function; either or both may be an
empty string.
If the option -n is also given, pretext or posttext
will only be inserted if there is text before or after
the region respectively which will be made invisible.
Two numeric arguments may be given which will be used
instead of the cursor and mark positions.
The option -S statepm is used to narrow according to
the other options while saving the original state in
the parameter with name statepm, while the option -R
statepm is used to restore the state from the parame-
ter; note in both cases the name of the parameter is
required. In the second case, other options and argu-
ments are irrelevant. When this method is used, no
recursive-edit is performed; the calling widget should
call this function with the option -S, perform its own
editing on the command line or pass control to the user
via `zle recursive-edit', then call this function with
the option -R. The argument statepm must be a suitable
name for an ordinary parameter, except that parameters
beginning with the prefix _ntr_ are reserved for use
within narrow-to-region. Typically the parameter will
be local to the calling function.
narrow-to-region-invisible is a simple widget which
calls narrow-to-region with arguments which replace any
text outside the region with `...'.
The display is restored (and the widget returns) upon
any zle command which would usually cause the line to
be accepted or aborted. Hence an additional such com-
mand is required to accept or abort the current line.
The return status of both widgets is zero if the line
was accepted, else non-zero.
Here is a trivial example of a widget using this fea-
ture.
zsh 5.0.5 Last change: January 5, 2014 44
User Commands ZSHCONTRIB(1)
local state
narrow-to-region -p $'Editing restricted region\n' \
-P '' -S state
zle recursive-edit
narrow-to-region -R state
predict-on
This set of functions implements predictive typing
using history search. After predict-on, typing charac-
ters causes the editor to look backward in the history
for the first line beginning with what you have typed
so far. After predict-off, editing returns to normal
for the line found. In fact, you often don't even need
to use predict-off, because if the line doesn't match
something in the history, adding a key performs stan-
dard completion, and then inserts itself if no comple-
tions were found. However, editing in the middle of a
line is liable to confuse prediction; see the toggle
style below.
With the function based completion system (which is
needed for this), you should be able to type TAB at
almost any point to advance the cursor to the next
``interesting'' character position (usually the end of
the current word, but sometimes somewhere in the middle
of the word). And of course as soon as the entire line
is what you want, you can accept with return, without
needing to move the cursor to the end first.
The first time predict-on is used, it creates several
additional widget functions:
delete-backward-and-predict
Replaces the backward-delete-char widget. You do
not need to bind this yourself.
insert-and-predict
Implements predictive typing by replacing the
self-insert widget. You do not need to bind this
yourself.
predict-off
Turns off predictive typing.
Although you autoload only the predict-on function, it
is necessary to create a keybinding for predict-off as
well.
zle -N predict-on
zle -N predict-off
bindkey '^X^Z' predict-on
bindkey '^Z' predict-off
read-from-minibuffer
zsh 5.0.5 Last change: January 5, 2014 45
User Commands ZSHCONTRIB(1)
This is most useful when called as a function from
inside a widget, but will work correctly as a widget in
its own right. It prompts for a value below the cur-
rent command line; a value may be input using all of
the standard zle operations (and not merely the
restricted set available when executing, for example,
execute-named-cmd). The value is then returned to the
calling function in the parameter $REPLY and the edit-
ing buffer restored to its previous state. If the read
was aborted by a keyboard break (typically ^G), the
function returns status 1 and $REPLY is not set.
If one argument is supplied to the function it is taken
as a prompt, otherwise `? ' is used. If two arguments
are supplied, they are the prompt and the initial value
of $LBUFFER, and if a third argument is given it is the
initial value of $RBUFFER. This provides a default
value and starting cursor placement. Upon return the
entire buffer is the value of $REPLY.
One option is available: `-k num' specifies that num
characters are to be read instead of a whole line. The
line editor is not invoked recursively in this case, so
depending on the terminal settings the input may not be
visible, and only the input keys are placed in $REPLY,
not the entire buffer. Note that unlike the read
builtin num must be given; there is no default.
The name is a slight misnomer, as in fact the shell's
own minibuffer is not used. Hence it is still possible
to call executed-named-cmd and similar functions while
reading a value.
replace-string, replace-pattern
replace-string-again, replace-pattern-again
The function replace-string implements three widgets.
If defined under the same name as the function, it
prompts for two strings; the first (source) string will
be replaced by the second everywhere it occurs in the
line editing buffer.
If the widget name contains the word `pattern', for
example by defining the widget using the command `zle
-N replace-pattern replace-string', then the matching
is performed using zsh patterns. All zsh extended
globbing patterns can be used in the source string;
note that unlike filename generation the pattern does
not need to match an entire word, nor do glob quali-
fiers have any effect. In addition, the replacement
string can contain parameter or command substitutions.
Furthermore, a `&' in the replacement string will be
replaced with the matched source string, and a
zsh 5.0.5 Last change: January 5, 2014 46
User Commands ZSHCONTRIB(1)
backquoted digit `\N' will be replaced by the Nth
parenthesised expression matched. The form `\{N}' may
be used to protect the digit from following digits.
If the widget instead contains the word `regex' (or
`regexp'), then the matching is performed using regular
expressions, respecting the setting of the option
RE_MATCH_PCRE (see the description of the function reg-
exp-replace below). The special replacement facilities
described above for pattern matching are available.
By default the previous source or replacement string
will not be offered for editing. However, this feature
can be activated by setting the style edit-previous in
the context :zle:widget (for example,
:zle:replace-string) to true. In addition, a positive
numeric argument forces the previous values to be
offered, a negative or zero argument forces them not to
be.
The function replace-string-again can be used to repeat
the previous replacement; no prompting is done. As
with replace-string, if the name of the widget contains
the word `pattern' or `regex', pattern or regular
expression matching is performed, else a literal string
replacement. Note that the previous source and
replacement text are the same whether pattern, regular
expression or string matching is used.
In addition, replace-string shows the previous replace-
ment above the prompt, so long as there was one during
the current session; if the source string is empty,
that replacement will be repeated without the widget
prompting for a replacement string.
For example, starting from the line:
print This line contains fan and fond
and invoking replace-pattern with the source string
`f(?)n' and the replacement string `c\1r' produces the
not very useful line:
print This line contains car and cord
The range of the replacement string can be limited by
using the narrow-to-region-invisible widget. One limi-
tation of the current version is that undo will cycle
through changes to the replacement and source strings
before undoing the replacement itself.
send-invisible
zsh 5.0.5 Last change: January 5, 2014 47
User Commands ZSHCONTRIB(1)
This is similar to read-from-minibuffer in that it may
be called as a function from a widget or as a widget of
its own, and interactively reads input from the key-
board. However, the input being typed is concealed and
a string of asterisks (`*') is shown instead. The
value is saved in the parameter $INVISIBLE to which a
reference is inserted into the editing buffer at the
restored cursor position. If the read was aborted by a
keyboard break (typically ^G) or another escape from
editing such as push-line, $INVISIBLE is set to empty
and the original buffer is restored unchanged.
If one argument is supplied to the function it is taken
as a prompt, otherwise `Non-echoed text: ' is used (as
in emacs). If a second and third argument are supplied
they are used to begin and end the reference to $INVIS-
IBLE that is inserted into the buffer. The default is
to open with ${, then INVISIBLE, and close with }, but
many other effects are possible.
smart-insert-last-word
This function may replace the insert-last-word widget,
like so:
zle -N insert-last-word smart-insert-last-word
With a numeric prefix, or when passed command line
arguments in a call from another widget, it behaves
like insert-last-word, except that words in comments
are ignored when INTERACTIVE_COMMENTS is set.
Otherwise, the rightmost ``interesting'' word from the
previous command is found and inserted. The default
definition of ``interesting'' is that the word contains
at least one alphabetic character, slash, or backslash.
This definition may be overridden by use of the match
style. The context used to look up the style is the
widget name, so usually the context is
:insert-last-word. However, you can bind this function
to different widgets to use different patterns:
zle -N insert-last-assignment smart-insert-last-word
zstyle :insert-last-assignment match '[[:alpha:]][][[:alnum:]]#=*'
bindkey '\e=' insert-last-assignment
If no interesting word is found and the auto-previous
style is set to a true value, the search continues
upward through the history. When auto-previous is
unset or false (the default), the widget must be
invoked repeatedly in order to search earlier history
lines.
zsh 5.0.5 Last change: January 5, 2014 48
User Commands ZSHCONTRIB(1)
transpose-lines
Only useful with a multi-line editing buffer; the lines
here are lines within the current on-screen buffer, not
history lines. The effect is similar to the function
of the same name in Emacs.
Transpose the current line with the previous line and
move the cursor to the start of the next line. Repeat-
ing this (which can be done by providing a positive
numeric prefix argument) has the effect of moving the
line above the cursor down by a number of lines.
With a negative numeric prefix argument, requires two
lines above the cursor. These two lines are transposed
and the cursor moved to the start of the previous line.
Using a numeric prefix less than -1 has the effect of
moving the line above the cursor up by minus that num-
ber of lines.
which-command
This function is a drop-in replacement for the builtin
widget which-command. It has enhanced behaviour, in
that it correctly detects whether or not the command
word needs to be expanded as an alias; if so, it con-
tinues tracing the command word from the expanded alias
until it reaches the command that will be executed.
The style whence is available in the context :zle:$WID-
GET; this may be set to an array to give the command
and options that will be used to investigate the com-
mand word found. The default is whence -c.
Utility Functions
These functions are useful in constructing widgets. They
should be loaded with `autoload -U function' and called as
indicated from user-defined widgets.
split-shell-arguments
This function splits the line currently being edited
into shell arguments and whitespace. The result is
stored in the array reply. The array contains all the
parts of the line in order, starting with any white-
space before the first argument, and finishing with any
whitespace after the last argument. Hence (so long as
the option KSH_ARRAYS is not set) whitespace is given
by odd indices in the array and arguments by even
indices. Note that no stripping of quotes is done;
joining together all the elements of reply in order is
guaranteed to produce the original line.
The parameter REPLY is set to the index of the word in
reply which contains the character after the cursor,
zsh 5.0.5 Last change: January 5, 2014 49
User Commands ZSHCONTRIB(1)
where the first element has index 1. The parameter
REPLY2 is set to the index of the character under the
cursor in that word, where the first character has
index 1.
Hence reply, REPLY and REPLY2 should all be made local
to the enclosing function.
See the function modify-current-argument, described
below, for an example of how to call this function.
modify-current-argument [ expr-using-$ARG | func ]
This function provides a simple method of allowing
user-defined widgets to modify the command line argu-
ment under the cursor (or immediately to the left of
the cursor if the cursor is between arguments).
The argument can be an expression which when evaluated
operates on the shell parameter ARG, which will have
been set to the command line argument under the cursor.
The expression should be suitably quoted to prevent it
being evaluated too early.
Alternatively, if the argument does not contain the
string ARG, it is assumed to be a shell function, to
which the current command line argument is passed as
the only argument. The function should set the vari-
able REPLY to the new value for the command line argu-
ment. If the function returns non-zero status, so does
the calling function.
For example, a user-defined widget containing the fol-
lowing code converts the characters in the argument
under the cursor into all upper case:
modify-current-argument '${(U)ARG}'
The following strips any quoting from the current word
(whether backslashes or one of the styles of quotes),
and replaces it with single quoting throughout:
modify-current-argument '${(qq)${(Q)ARG}}'
The following performs directory expansion on the com-
mand line argument and replaces it by the absolute
path:
expand-dir() {
REPLY=${~1}
REPLY=${REPLY:a}
}
modify-current-argument expand-dir
zsh 5.0.5 Last change: January 5, 2014 50
User Commands ZSHCONTRIB(1)
In practice the function expand-dir would probably not
be defined within the widget where modify-current-argu-
ment is called.
Styles
The behavior of several of the above widgets can be con-
trolled by the use of the zstyle mechanism. In particular,
widgets that interact with the completion system pass along
their context to any completions that they invoke.
break-keys
This style is used by the incremental-complete-word
widget. Its value should be a pattern, and all keys
matching this pattern will cause the widget to stop
incremental completion without the key having any fur-
ther effect. Like all styles used directly by incremen-
tal-complete-word, this style is looked up using the
context `:incremental'.
completer
The incremental-complete-word and insert-and-predict
widgets set up their top-level context name before
calling completion. This allows one to define differ-
ent sets of completer functions for normal completion
and for these widgets. For example, to use completion,
approximation and correction for normal completion,
completion and correction for incremental completion
and only completion for prediction one could use:
zstyle ':completion:*' completer \
_complete _correct _approximate
zstyle ':completion:incremental:*' completer \
_complete _correct
zstyle ':completion:predict:*' completer \
_complete
It is a good idea to restrict the completers used in
prediction, because they may be automatically invoked
as you type. The _list and _menu completers should
never be used with prediction. The _approximate, _cor-
rect, _expand, and _match completers may be used, but
be aware that they may change characters anywhere in
the word behind the cursor, so you need to watch care-
fully that the result is what you intended.
cursor
The insert-and-predict widget uses this style, in the
context `:predict', to decide where to place the cursor
after completion has been tried. Values are:
complete
The cursor is left where it was when completion
zsh 5.0.5 Last change: January 5, 2014 51
User Commands ZSHCONTRIB(1)
finished, but only if it is after a character
equal to the one just inserted by the user. If it
is after another character, this value is the same
as `key'.
key The cursor is left after the nth occurrence of the
character just inserted, where n is the number of
times that character appeared in the word before
completion was attempted. In short, this has the
effect of leaving the cursor after the character
just typed even if the completion code found out
that no other characters need to be inserted at
that position.
Any other value for this style unconditionally leaves
the cursor at the position where the completion code
left it.
list When using the incremental-complete-word widget, this
style says if the matches should be listed on every key
press (if they fit on the screen). Use the context
prefix `:completion:incremental'.
The insert-and-predict widget uses this style to decide
if the completion should be shown even if there is only
one possible completion. This is done if the value of
this style is the string always. In this case the con-
text is `:predict' (not `:completion:predict').
match
This style is used by smart-insert-last-word to provide
a pattern (using full EXTENDED_GLOB syntax) that
matches an interesting word. The context is the name
of the widget to which smart-insert-last-word is bound
(see above). The default behavior of
smart-insert-last-word is equivalent to:
zstyle :insert-last-word match '*[[:alpha:]/\\]*'
However, you might want to include words that contain
spaces:
zstyle :insert-last-word match '*[[:alpha:][:space:]/\\]*'
Or include numbers as long as the word is at least two
characters long:
zstyle :insert-last-word match '*([[:digit:]]?|[[:alpha:]/\\])*'
The above example causes redirections like "2>" to be
included.
zsh 5.0.5 Last change: January 5, 2014 52
User Commands ZSHCONTRIB(1)
prompt
The incremental-complete-word widget shows the value of
this style in the status line during incremental com-
pletion. The string value may contain any of the fol-
lowing substrings in the manner of the PS1 and other
prompt parameters:
%c Replaced by the name of the completer function
that generated the matches (without the leading
underscore).
%l When the list style is set, replaced by `...' if
the list of matches is too long to fit on the
screen and with an empty string otherwise. If the
list style is `false' or not set, `%l' is always
removed.
%n Replaced by the number of matches generated.
%s Replaced by `-no match-', `-no prefix-', or an
empty string if there is no completion matching
the word on the line, if the matches have no com-
mon prefix different from the word on the line, or
if there is such a common prefix, respectively.
%u Replaced by the unambiguous part of all matches,
if there is any, and if it is different from the
word on the line.
Like `break-keys', this uses the `:incremental' con-
text.
stop-keys
This style is used by the incremental-complete-word
widget. Its value is treated similarly to the one for
the break-keys style (and uses the same context:
`:incremental'). However, in this case all keys match-
ing the pattern given as its value will stop incremen-
tal completion and will then execute their usual func-
tion.
toggle
This boolean style is used by predict-on and its
related widgets in the context `:predict'. If set to
one of the standard `true' values, predictive typing is
automatically toggled off in situations where it is
unlikely to be useful, such as when editing a
multi-line buffer or after moving into the middle of a
line and then deleting a character. The default is to
leave prediction turned on until an explicit call to
predict-off.
zsh 5.0.5 Last change: January 5, 2014 53
User Commands ZSHCONTRIB(1)
verbose
This boolean style is used by predict-on and its
related widgets in the context `:predict'. If set to
one of the standard `true' values, these widgets dis-
play a message below the prompt when the predictive
state is toggled. This is most useful in combination
with the toggle style. The default does not display
these messages.
widget
This style is similar to the command style: For widget
functions that use zle to call other widgets, this
style can sometimes be used to override the widget
which is called. The context for this style is the
name of the calling widget (not the name of the calling
function, because one function may be bound to multiple
widget names).
zstyle :copy-earlier-word widget smart-insert-last-word
Check the documentation for the calling widget or func-
tion to determine whether the widget style is used.
EXCEPTION HANDLING
Two functions are provided to enable zsh to provide excep-
tion handling in a form that should be familiar from other
languages.
throw exception
The function throw throws the named exception. The
name is an arbitrary string and is only used by the
throw and catch functions. An exception is for the
most part treated the same as a shell error, i.e. an
unhandled exception will cause the shell to abort all
processing in a function or script and to return to the
top level in an interactive shell.
catch exception-pattern
The function catch returns status zero if an exception
was thrown and the pattern exception-pattern matches
its name. Otherwise it returns status 1. excep-
tion-pattern is a standard shell pattern, respecting
the current setting of the EXTENDED_GLOB option. An
alias catch is also defined to prevent the argument to
the function from matching filenames, so patterns may
be used unquoted. Note that as exceptions are not fun-
damentally different from other shell errors it is pos-
sible to catch shell errors by using an empty string as
the exception name. The shell variable CAUGHT is set
by catch to the name of the exception caught. It is
possible to rethrow an exception by calling the throw
function again once an exception has been caught.
zsh 5.0.5 Last change: January 5, 2014 54
User Commands ZSHCONTRIB(1)
The functions are designed to be used together with the
always construct described in zshmisc(1). This is important
as only this construct provides the required support for
exceptions. A typical example is as follows.
{
# "try" block
# ... nested code here calls "throw MyExcept"
} always {
# "always" block
if catch MyExcept; then
print "Caught exception MyExcept"
elif catch ''; then
print "Caught a shell error. Propagating..."
throw ''
fi
# Other exceptions are not handled but may be caught further
# up the call stack.
}
If all exceptions should be caught, the following idiom
might be preferable.
{
# ... nested code here throws an exception
} always {
if catch *; then
case $CAUGHT in
(MyExcept)
print "Caught my own exception"
;;
(*)
print "Caught some other exception"
;;
esac
fi
}
In common with exception handling in other languages, the
exception may be thrown by code deeply nested inside the
`try' block. However, note that it must be thrown inside
the current shell, not in a subshell forked for a pipeline,
parenthesised current-shell construct, or some form of com-
mand or process substitution.
The system internally uses the shell variable EXCEPTION to
record the name of the exception between throwing and catch-
ing. One drawback of this scheme is that if the exception
is not handled the variable EXCEPTION remains set and may be
incorrectly recognised as the name of an exception if a
shell error subsequently occurs. Adding unset EXCEPTION at
the start of the outermost layer of any code that uses
zsh 5.0.5 Last change: January 5, 2014 55
User Commands ZSHCONTRIB(1)
exception handling will eliminate this problem.
MIME FUNCTIONS
Three functions are available to provide handling of files
recognised by extension, for example to dispatch a file
text.ps when executed as a command to an appropriate viewer.
zsh-mime-setup [ -fv ] [ -l [ suffix ... ] ]
zsh-mime-handler [-l] command arguments ...
These two functions use the files ~/.mime.types and
/etc/mime.types, which associate types and extensions,
as well as ~/.mailcap and /etc/mailcap files, which as-
sociate types and the programs that handle them. These
are provided on many systems with the Multimedia Inter-
net Mail Extensions.
To enable the system, the function zsh-mime-setup
should be autoloaded and run. This allows files with
extensions to be treated as executable; such files be
completed by the function completion system. The func-
tion zsh-mime-handler should not need to be called by
the user.
The system works by setting up suffix aliases with
`alias -s'. Suffix aliases already installed by the
user will not be overwritten.
For suffixes defined in lower case, upper case variants
will also automatically be handled (e.g. PDF is auto-
matically handled if handling for the suffix pdf is
defined), but not vice versa.
Repeated calls to zsh-mime-setup do not override the
existing mapping between suffixes and executable files
unless the option -f is given. Note, however, that
this does not override existing suffix aliases assigned
to handlers other than zsh-mime-handler.
Calling zsh-mime-setup with the option -l lists the
existing mappings without altering them. Suffixes to
list (which may contain pattern characters that should
be quoted from immediate interpretation on the command
line) may be given as additional arguments, otherwise
all suffixes are listed.
Calling zsh-mime-setup with the option -v causes ver-
bose output to be shown during the setup operation.
The system respects the mailcap flags needsterminal and
copiousoutput, see mailcap(4).
zsh 5.0.5 Last change: January 5, 2014 56
User Commands ZSHCONTRIB(1)
The functions use the following styles, which are
defined with the zstyle builtin command (see zshmod-
ules(1)). They should be defined before zsh-mime-setup
is run. The contexts used all start with :mime:, with
additional components in some cases. It is recommended
that a trailing * (suitably quoted) be appended to
style patterns in case the system is extended in
future. Some examples are given below.
For files that have multiple suffixes, e.g. .pdf.gz,
where the context includes the suffix it will be looked
up starting with the longest possible suffix until a
match for the style is found. For example, if .pdf.gz
produces a match for the handler, that will be used;
otherwise the handler for .gz will be used. Note that,
owing to the way suffix aliases work, it is always
required that there be a handler for the shortest pos-
sible suffix, so in this example .pdf.gz can only be
handled if .gz is also handled (though not necessarily
in the same way). Alternatively, if no handling for
.gz on its own is needed, simply adding the command
alias -s gz=zsh-mime-handler
to the initialisation code is sufficient; .gz will not
be handled on its own, but may be in combination with
other suffixes.
current-shell
If this boolean style is true, the mailcap handler
for the context in question is run using the eval
builtin instead of by starting a new sh process.
This is more efficient, but may not work in the
occasional cases where the mailcap handler uses
strict POSIX syntax.
disown
If this boolean style is true, mailcap handlers
started in the background will be disowned, i.e.
not subject to job control within the parent
shell. Such handlers nearly always produce their
own windows, so the only likely harmful side
effect of setting the style is that it becomes
harder to kill jobs from within the shell.
execute-as-is
This style gives a list of patterns to be matched
against files passed for execution with a handler
program. If the file matches the pattern, the
entire command line is executed in its current
form, with no handler. This is useful for files
which might have suffixes but nonetheless be
zsh 5.0.5 Last change: January 5, 2014 57
User Commands ZSHCONTRIB(1)
executable in their own right. If the style is
not set, the pattern *(*) *(/) is used; hence exe-
cutable files are executed directly and not passed
to a handler, and the option AUTO_CD may be used
to change to directories that happen to have MIME
suffixes.
execute-never
This style is useful in combination with exe-
cute-as-is. It is set to an array of patterns
corresponding to full paths to files that should
never be treated as executable, even if the file
passed to the MIME handler matches execute-as-is.
This is useful for file systems that don't handle
execute permission or that contain executables
from another operating system. For example, if
/mnt/windows is a Windows mount, then
zstyle ':mime:*' execute-never '/mnt/windows/*'
will ensure that any files found in that area will
be executed as MIME types even if they are exe-
cutable. As this example shows, the complete file
name is matched against the pattern, regardless of
how the file was passed to the handler. The file
is resolved to a full path using the :A modifier
described in the subsection Modifers in zsh-
expn(1).RE; this means that symbolic links are
resolved where possible, so that links into other
file systems behave in the correct fashion.
file-path
Used if the style find-file-in-path is true for
the same context. Set to an array of directories
that are used for searching for the file to be
handled; the default is the command path given by
the special parameter path. The shell option
PATH_DIRS is respected; if that is set, the appro-
priate path will be searched even if the name of
the file to be handled as it appears on the com-
mand line contains a `/'. The full context is
:mime:.suffix:, as described for the style han-
dler.
find-file-in-path
If set, allows files whose names do not contain
absolute paths to be searched for in the command
path or the path specified by the file-path style.
If the file is not found in the path, it is looked
for locally (whether or not the current directory
is in the path); if it is not found locally, the
handler will abort unless the handle-nonexistent
zsh 5.0.5 Last change: January 5, 2014 58
User Commands ZSHCONTRIB(1)
style is set. Files found in the path are tested
as described for the style execute-as-is. The
full context is :mime:.suffix:, as described for
the style handler.
flags
Defines flags to go with a handler; the context is
as for the handler style, and the format is as for
the flags in mailcap.
handle-nonexistent
By default, arguments that don't correspond to
files are not passed to the MIME handler in order
to prevent it from intercepting commands found in
the path that happen to have suffixes. This style
may be set to an array of extended glob patterns
for arguments that will be passed to the handler
even if they don't exist. If it is not explicitly
set it defaults to [[:alpha:]]#:/* which allows
URLs to be passed to the MIME handler even though
they don't exist in that format in the file sys-
tem. The full context is :mime:.suffix:, as
described for the style handler.
handler
Specifies a handler for a suffix; the suffix is
given by the context as :mime:.suffix:, and the
format of the handler is exactly that in mailcap.
Note in particular the `.' and trailing colon to
distinguish this use of the context. This over-
rides any handler specified by the mailcap files.
If the handler requires a terminal, the flags
style should be set to include the word needster-
minal, or if the output is to be displayed through
a pager (but not if the handler is itself a
pager), it should include copiousoutput.
mailcap
A list of files in the format of ~/.mailcap and
/etc/mailcap to be read during setup, replacing
the default list which consists of those two
files. The context is :mime:. A + in the list
will be replaced by the default files.
mailcap-priorities
This style is used to resolve multiple mailcap
entries for the same MIME type. It consists of an
array of the following elements, in descending
order of priority; later entries will be used if
earlier entries are unable to resolve the entries
being compared. If none of the tests resolve the
entries, the first entry encountered is retained.
zsh 5.0.5 Last change: January 5, 2014 59
User Commands ZSHCONTRIB(1)
files
The order of files (entries in the mailcap
style) read. Earlier files are preferred.
(Note this does not resolve entries in the
same file.)
priority
The priority flag from the mailcap entry.
The priority is an integer from 0 to 9 with
the default value being 5.
flags
The test given by the mailcap-prio-flags
option is used to resolve entries.
place
Later entries are preferred; as the entries
are strictly ordered, this test always suc-
ceeds.
Note that as this style is handled during initial-
isation, the context is always :mime:, with no
discrimination by suffix.
mailcap-prio-flags
This style is used when the keyword flags is
encountered in the list of tests specified by the
mailcap-priorities style. It should be set to a
list of patterns, each of which is tested against
the flags specified in the mailcap entry (in other
words, the sets of assignments found with some
entries in the mailcap file). Earlier patterns in
the list are preferred to later ones, and matched
patterns are preferred to unmatched ones.
mime-types
A list of files in the format of ~/.mime.types and
/etc/mime.types to be read during setup, replacing
the default list which consists of those two
files. The context is :mime:. A + in the list
will be replaced by the default files.
never-background
If this boolean style is set, the handler for the
given context is always run in the foreground,
even if the flags provided in the mailcap entry
suggest it need not be (for example, it doesn't
require a terminal).
pager
If set, will be used instead of $PAGER or more to
handle suffixes where the copiousoutput flag is
zsh 5.0.5 Last change: January 5, 2014 60
User Commands ZSHCONTRIB(1)
set. The context is as for handler, i.e.
:mime:.suffix: for handling a file with the given
suffix.
Examples:
zstyle ':mime:*' mailcap ~/.mailcap /usr/local/etc/mailcap
zstyle ':mime:.txt:' handler less %s
zstyle ':mime:.txt:' flags needsterminal
When zsh-mime-setup is subsequently run, it will look
for mailcap entries in the two files given. Files of
suffix .txt will be handled by running `less file.txt'.
The flag needsterminal is set to show that this program
must run attached to a terminal.
As there are several steps to dispatching a command,
the following should be checked if attempting to exe-
cute a file by extension .ext does not have the
expected effect.
The command `alias -s ext' should show
`ps=zsh-mime-handler'. If it shows something else,
another suffix alias was already installed and was not
overwritten. If it shows nothing, no handler was
installed: this is most likely because no handler was
found in the .mime.types and mailcap combination for
.ext files. In that case, appropriate handling should
be added to ~/.mime.types and mailcap.
If the extension is handled by zsh-mime-handler but the
file is not opened correctly, either the handler
defined for the type is incorrect, or the flags associ-
ated with it are in appropriate. Running zsh-mime-set-
up -l will show the handler and, if there are any, the
flags. A %s in the handler is replaced by the file
(suitably quoted if necessary). Check that the handler
program listed lists and can be run in the way shown.
Also check that the flags needsterminal or copiousout-
put are set if the handler needs to be run under a ter-
minal; the second flag is used if the output should be
sent to a pager. An example of a suitable mailcap
entry for such a program is:
text/html; /usr/bin/lynx '%s'; needsterminal
Running `zsh-mime-handler -l command line' prints the
command line that would be executed, simplified to
remove the effect of any flags, and quoted so that the
output can be run as a complete zsh command line. This
is used by the completion system to decide how to com-
plete after a file handled by zsh-mime-setup. )
zsh 5.0.5 Last change: January 5, 2014 61
User Commands ZSHCONTRIB(1)
pick-web-browser
This function is separate from the two MIME func-
tions described above and can be assigned directly
to a suffix:
autoload -U pick-web-browser
alias -s html=pick-web-browser
It is provided as an intelligent front end to dis-
patch a web browser. It may be run as either a
function or a shell script. The status 255 is
returned if no browser could be started.
Various styles are available to customize the
choice of browsers:
browser-style
The value of the style is an array giving
preferences in decreasing order for the type
of browser to use. The values of elements
may be
running
Use a GUI browser that is already run-
ning when an X Window display is avail-
able. The browsers listed in the
x-browsers style are tried in order
until one is found; if it is, the file
will be displayed in that browser, so
the user may need to check whether it
has appeared. If no running browser is
found, one is not started. Browsers
other than Firefox, Opera and Konqueror
are assumed to understand the Mozilla
syntax for opening a URL remotely.
x Start a new GUI browser when an X Window
display is available. Search for the
availability of one of the browsers
listed in the x-browsers style and start
the first one that is found. No check
is made for an already running browser.
tty Start a terminal-based browser. Search
for the availability of one of the
browsers listed in the tty-browsers
style and start the first one that is
found.
If the style is not set the default running x
tty is used.
zsh 5.0.5 Last change: January 5, 2014 62
User Commands ZSHCONTRIB(1)
x-browsers
An array in decreasing order of preference of
browsers to use when running under the X Win-
dow System. The array consists of the com-
mand name under which to start the browser.
They are looked up in the context :mime:
(which may be extended in future, so append-
ing `*' is recommended). For example,
zstyle ':mime:*' x-browsers opera konqueror firefox
specifies that pick-web-browser should first
look for a running instance of Opera, Kon-
queror or Firefox, in that order, and if it
fails to find any should attempt to start
Opera. The default is firefox mozilla
netscape opera konqueror.
tty-browsers
An array similar to x-browsers, except that
it gives browsers to use when no X Window
display is available. The default is elinks
links lynx.
command
If it is set this style is used to pick the
command used to open a page for a browser.
The context is :mime:browser:new:$browser: to
start a new browser or :mime:browser:run-
ning:$browser: to open a URL in a browser
already running on the current X display,
where $browser is the value matched in the
x-browsers or tty-browsers style. The escape
sequence %b in the style's value will be
replaced by the browser, while %u will be
replaced by the URL. If the style is not
set, the default for all new instances is
equivalent to %b %u and the defaults for
using running browsers are equivalent to the
values kfmclient openURL %u for Konqueror,
firefox -new-tab %u for Firefox, opera -new-
page %u for Opera, and %b -remote
"openUrl(%u)" for all others.
MATHEMATICAL FUNCTIONS
zcalc [ -ef ] [ expression ... ]
A reasonably powerful calculator based on zsh's arith-
metic evaluation facility. The syntax is similar to
that of formulae in most programming languages; see the
section `Arithmetic Evaluation' in zshmisc(1) for
details. The mathematical library zsh/mathfunc will be
loaded if it is available; see the section `The
zsh 5.0.5 Last change: January 5, 2014 63
User Commands ZSHCONTRIB(1)
zsh/mathfunc Module' in zshmodules(1). The mathemati-
cal functions correspond to the raw system libraries,
so trigonometric functions are evaluated using radians,
and so on.
Each line typed is evaluated as an expression. The
prompt shows a number, which corresponds to a posi-
tional parameter where the result of that calculation
is stored. For example, the result of the calculation
on the line preceded by `4> ' is available as $4. The
last value calculated is available as ans. Full com-
mand line editing, including the history of previous
calculations, is available; the history is saved in the
file ~/.zcalc_history. To exit, enter a blank line or
type `:q' on its own (`q' is allowed for historical
compatibility).
A line ending with a single backslash is treated in the
same fashion as it is in command line editing: the
backslash is removed, the function prompts for more
input (the prompt is preceded by `...' to indicate
this), and the lines are combined into one to get the
final result. In addition, if the input so far con-
tains more open than close parentheses zcalc will
prompt for more input.
If arguments are given to zcalc on start up, they are
used to prime the first few positional parameters. A
visual indication of this is given when the calculator
starts.
The constants PI (3.14159...) and E (2.71828...) are
provided. Parameter assignment is possible, but note
that all parameters will be put into the global names-
pace.
The output base can be initialised by passing the
option `-#base', for example `zcalc -#16' (the `#' may
have to be quoted, depending on the globbing options
set).
If the option `-e' is set, the function runs non-inter-
actively: the arguments are treated as expressions to
be evaluated as if entered interactively line by line.
If the option `-f' is set, all numbers are treated as
floating point, hence for example the expression `3/4'
evaluates to 0.75 rather than 0. Options must appear
in separate words.
The prompt is configurable via the parameter ZCAL-
CPROMPT, which undergoes standard prompt expansion.
zsh 5.0.5 Last change: January 5, 2014 64
User Commands ZSHCONTRIB(1)
The index of the current entry is stored locally in the
first element of the array psvar, which can be referred
to in ZCALCPROMPT as `%1v'. The default prompt is
`%1v> '.
A few special commands are available; these are intro-
duced by a colon. For backward compatibility, the
colon may be omitted for certain commands. Completion
is available if compinit has been run.
The output precision may be specified within zcalc by
special commands familiar from many calculators.
:norm
The default output format. It corresponds to the
printf %g specification. Typically this shows six
decimal digits.
:sci digits
Scientific notation, corresponding to the printf
%g output format with the precision given by dig-
its. This produces either fixed point or exponen-
tial notation depending on the value output.
:fix digits
Fixed point notation, corresponding to the printf
%f output format with the precision given by dig-
its.
:eng digits
Exponential notation, corresponding to the printf
%E output format with the precision given by dig-
its.
:raw Raw output: this is the default form of the out-
put from a math evaluation. This may show more
precision than the number actually possesses.
Other special commands:
:!line...
Execute line... as a normal shell command line.
Note that it is executed in the context of the
function, i.e. with local variables. Space is
optional after :!.
:local arg ...
Declare variables local to the function. Note
that certain variables are used by the function
for its own purposes. Other variables may be
used, too, but they will be taken from or put into
the global scope.
:function name [ body ]
zsh 5.0.5 Last change: January 5, 2014 65
User Commands ZSHCONTRIB(1)
Define a mathematical function or (with no body)
delete it. :function may be abbreviated to :func
or simply :f. The name may contain the same char-
acters as a shell function name. The function is
defined using zmathfuncdef, see below.
Note that zcalc takes care of all quoting. Hence
for example:
:f cube $1 * $1 * $1
defines a function to cube the sole argument.
[#base]
This is not a special command, rather part of nor-
mal arithmetic syntax; however, when this form
appears on a line by itself the default output
radix is set to base. Use, for example, `[#16]'
to display hexadecimal output preceded by an indi-
cation of the base, or `[##16]' just to display
the raw number in the given base. Bases them-
selves are always specified in decimal. `[#]'
restores the normal output format. Note that set-
ting an output base suppresses floating point out-
put; use `[#]' to return to normal operation.
See the comments in the function for a few extra tips.
zmathfuncdef [ mathfunc [ body ] ]
A convenient front end to functions -M.
With two arguments, define a mathematical function
named mathfunc which can be used in any form of arith-
metic evaluation. body is a mathematical expression to
implement the function. It may contain references to
position parameters $1, $2, ... to refer to mandatory
parameters and ${1:-defvalue} ... to refer to optional
parameters. Note that the forms must be strictly
adhered to for the function to calculate the correct
number of arguments. The implementation is held in a
shell function named zsh_math_func_mathfunc; usually
the user will not need to refer to the shell function
directly. Any existing function of the same name is
silently replaced.
With one argument, remove the mathematical function
mathfunc as well as the shell function implementation.
With no arguments, list all mathfunc functions in a
form suitable for restoring the definition. The func-
tions have not necessarily been defined by zmath-
funcdef.
zsh 5.0.5 Last change: January 5, 2014 66
User Commands ZSHCONTRIB(1)
USER CONFIGURATION FUNCTIONS
The zsh/newuser module comes with a function to aid in con-
figuring shell options for new users. If the module is
installed, this function can also be run by hand. It is
available even if the module's default behaviour, namely
running the function for a new user logging in without
startup files, is inhibited.
zsh-newuser-install [ -f ]
The function presents the user with various options for
customizing their initialization scripts. Currently
only ~/.zshrc is handled. $ZDOTDIR/.zshrc is used
instead if the parameter ZDOTDIR is set; this provides
a way for the user to configure a file without altering
an existing .zshrc.
By default the function exits immediately if it finds
any of the files .zshenv, .zprofile, .zshrc, or .zlogin
in the appropriate directory. The option -f is
required in order to force the function to continue.
Note this may happen even if .zshrc itself does not
exist.
As currently configured, the function will exit immedi-
ately if the user has root privileges; this behaviour
cannot be overridden.
Once activated, the function's behaviour is supposed to
be self-explanatory. Menus are present allowing the
user to alter the value of options and parameters.
Suggestions for improvements are always welcome.
When the script exits, the user is given the opportu-
nity to save the new file or not; changes are not irre-
versible until this point. However, the script is
careful to restrict changes to the file only to a group
marked by the lines `# Lines configured by
zsh-newuser-install' and `# End of lines configured by
zsh-newuser-install'. In addition, the old version of
.zshrc is saved to a file with the suffix .zni
appended.
If the function edits an existing .zshrc, it is up to
the user to ensure that the changes made will take
effect. For example, if control usually returns early
from the existing .zshrc the lines will not be exe-
cuted; or a later initialization file may override
options or parameters, and so on. The function itself
does not attempt to detect any such conflicts.
OTHER FUNCTIONS
zsh 5.0.5 Last change: January 5, 2014 67
User Commands ZSHCONTRIB(1)
There are a large number of helpful functions in the Func-
tions/Misc directory of the zsh distribution. Most are very
simple and do not require documentation here, but a few are
worthy of special mention.
Descriptions
colors
This function initializes several associative arrays to
map color names to (and from) the ANSI standard
eight-color terminal codes. These are used by the
prompt theme system (see above). You seldom should
need to run colors more than once.
The eight base colors are: black, red, green, yellow,
blue, magenta, cyan, and white. Each of these has
codes for foreground and background. In addition there
are eight intensity attributes: bold, faint, standout,
underline, blink, reverse, and conceal. Finally, there
are six codes used to negate attributes: none (reset
all attributes to the defaults), normal (neither bold
nor faint), no-standout, no-underline, no-blink, and
no-reverse.
Some terminals do not support all combinations of col-
ors and intensities.
The associative arrays are:
color
colour
Map all the color names to their integer codes,
and integer codes to the color names. The eight
base names map to the foreground color codes, as
do names prefixed with `fg-', such as `fg-red'.
Names prefixed with `bg-', such as `bg-blue',
refer to the background codes. The reverse map-
ping from code to color yields base name for fore-
ground codes and the bg- form for backgrounds.
Although it is a misnomer to call them `colors',
these arrays also map the other fourteen
attributes from names to codes and codes to names.
fg
fg_bold
fg_no_bold
Map the eight basic color names to ANSI terminal
escape sequences that set the corresponding fore-
ground text properties. The fg sequences change
the color without changing the eight intensity
attributes.
zsh 5.0.5 Last change: January 5, 2014 68
User Commands ZSHCONTRIB(1)
bg
bg_bold
bg_no_bold
Map the eight basic color names to ANSI terminal
escape sequences that set the corresponding back-
ground properties. The bg sequences change the
color without changing the eight intensity
attributes.
In addition, the scalar parameters reset_color and
bold_color are set to the ANSI terminal escapes that
turn off all attributes and turn on bold intensity,
respectively.
fned name
Same as zed -f. This function does not appear in the
zsh distribution, but can be created by linking zed to
the name fned in some directory in your fpath.
is-at-least needed [ present ]
Perform a greater-than-or-equal-to comparison of two
strings having the format of a zsh version number; that
is, a string of numbers and text with segments sepa-
rated by dots or dashes. If the present string is not
provided, $ZSH_VERSION is used. Segments are paired
left-to-right in the two strings with leading non-num-
ber parts ignored. If one string has fewer segments
than the other, the missing segments are considered
zero.
This is useful in startup files to set options and
other state that are not available in all versions of
zsh.
is-at-least 3.1.6-15 && setopt NO_GLOBAL_RCS
is-at-least 3.1.0 && setopt HIST_REDUCE_BLANKS
is-at-least 2.6-17 || print "You can't use is-at-least here."
nslookup [ arg ... ]
This wrapper function for the nslookup command requires
the zsh/zpty module (see zshmodules(1)). It behaves
exactly like the standard nslookup except that it pro-
vides customizable prompts (including a right-side
prompt) and completion of nslookup commands, host
names, etc. (if you use the function-based completion
system). Completion styles may be set with the context
prefix `:completion:nslookup'.
See also the pager, prompt and rprompt styles below.
regexp-replace var regexp replace
Use regular expressions to perform a global search and
zsh 5.0.5 Last change: January 5, 2014 69
User Commands ZSHCONTRIB(1)
replace operation on a variable. If the option
RE_MATCH_PCRE is not set, POSIX extended regular
expressions are used, else Perl-compatible regular
expressions (this requires the shell to be linked
against the pcre library).
var is the name of the variable containing the string
to be matched. The variable will be modified directly
by the function. The variables MATCH, MBEGIN, MEND,
match, mbegin, mend should be avoided as these are used
by the regular expression code.
regexp is the regular expression to match against the
string.
replace is the replacement text. This can contain
parameter, command and arithmetic expressions which
will be replaced: in particular, a reference to $MATCH
will be replaced by the text matched by the pattern.
The return status is 0 if at least one match was per-
formed, else 1.
run-help cmd
This function is designed to be invoked by the run-help
ZLE widget, in place of the default alias. See
`Accessing On-Line Help' above for setup instructions.
In the discussion which follows, if cmd is a file sys-
tem path, it is first reduced to its rightmost compo-
nent (the file name).
Help is first sought by looking for a file named cmd in
the directory named by the HELPDIR parameter. If no
file is found, an assistant function, alias, or command
named run-help-cmd is sought. If found, the assistant
is executed with the rest of the current command line
(everything after the command name cmd) as its argu-
ments. When neither file nor assistant is found, the
external command `man cmd' is run.
An example assistant for the "ssh" command:
run-help-ssh() {
emulate -LR zsh
local -a args
# Delete the "-l username" option
zparseopts -D -E -a args l:
# Delete other options, leaving: host command
args=(${@:#-*})
if [[ ${#args} -lt 2 ]]; then
man ssh
zsh 5.0.5 Last change: January 5, 2014 70
User Commands ZSHCONTRIB(1)
else
run-help $args[2]
fi
}
Several of these assistants are provided in the Func-
tions/Misc directory. These must be autoloaded, or
placed as executable scripts in your search path, in
order to be found and used by run-help.
run-help-git
run-help-svk
run-help-svn
Assistant functions for the git, svk, and svn com-
mands.
tetris
Zsh was once accused of not being as complete as Emacs,
because it lacked a Tetris game. This function was
written to refute this vicious slander.
This function must be used as a ZLE widget:
autoload -U tetris
zle -N tetris
bindkey keys tetris
To start a game, execute the widget by typing the keys.
Whatever command line you were editing disappears tem-
porarily, and your keymap is also temporarily replaced
by the Tetris control keys. The previous editor state
is restored when you quit the game (by pressing `q') or
when you lose.
If you quit in the middle of a game, the next invoca-
tion of the tetris widget will continue where you left
off. If you lost, it will start a new game.
zargs [ option ... -- ] [ input ... ] [ -- command [ arg ...
] ]
This function has a similar purpose to GNU xargs.
Instead of reading lines of arguments from the standard
input, it takes them from the command line. This is
useful because zsh, especially with recursive glob
operators, often can construct a command line for a
shell function that is longer than can be accepted by
an external command.
The option list represents options of the zargs command
itself, which are the same as those of xargs. The
input list is the collection of strings (often file
names) that become the arguments of the command,
zsh 5.0.5 Last change: January 5, 2014 71
User Commands ZSHCONTRIB(1)
analogous to the standard input of xargs. Finally, the
arg list consists of those arguments (usually options)
that are passed to the command each time it runs. The
arg list precedes the elements from the input list in
each run. If no command is provided, then no arg list
may be provided, and in that event the default command
is `print' with arguments `-r --'.
For example, to get a long ls listing of all plain
files in the current directory or its subdirectories:
autoload -U zargs
zargs -- **/*(.) -- ls -l
Note that `--' is used both to mark the end of the
option list and to mark the end of the input list, so
it must appear twice whenever the input list may be
empty. If there is guaranteed to be at least one input
and the first input does not begin with a `-', then the
first `--' may be omitted.
In the event that the string `--' is or may be an
input, the -e option may be used to change the
end-of-inputs marker. Note that this does not change
the end-of-options marker. For example, to use `..' as
the marker:
zargs -e.. -- **/*(.) .. ls -l
This is a good choice in that example because no plain
file can be named `..', but the best end-marker depends
on the circumstances.
The options -i, -I, -l, -L, and -n differ slightly from
their usage in xargs. There are no input lines for
zargs to count, so -l and -L count through the input
list, and -n counts the number of arguments passed to
each execution of command, including any arg list.
Also, any time -i or -I is used, each input is pro-
cessed separately as if by `-L 1'.
For details of the other zargs options, see xargs(1)
(but note the difference in function between zargs and
xargs) or run zargs with the --help option.
zed [ -f ] name
zed -b
This function uses the ZLE editor to edit a file or
function.
Only one name argument is allowed. If the -f option is
given, the name is taken to be that of a function; if
zsh 5.0.5 Last change: January 5, 2014 72
User Commands ZSHCONTRIB(1)
the function is marked for autoloading, zed searches
for it in the fpath and loads it. Note that functions
edited this way are installed into the current shell,
but not written back to the autoload file.
Without -f, name is the path name of the file to edit,
which need not exist; it is created on write, if neces-
sary.
While editing, the function sets the main keymap to zed
and the vi command keymap to zed-vicmd. These will be
copied from the existing main and vicmd keymaps if they
do not exist the first time zed is run. They can be
used to provide special key bindings used only in zed.
If it creates the keymap, zed rebinds the return key to
insert a line break and `^X^W' to accept the edit in
the zed keymap, and binds `ZZ' to accept the edit in
the zed-vicmd keymap.
The bindings alone can be installed by running `zed
-b'. This is suitable for putting into a startup file.
Note that, if rerun, this will overwrite the existing
zed and zed-vicmd keymaps.
Completion is available, and styles may be set with the
context prefix `:completion:zed'.
A zle widget zed-set-file-name is available. This can
be called by name from within zed using `\ex
zed-set-file-name' (note, however, that because of
zed's rebindings you will have to type ^j at the end
instead of the return key), or can be bound to a key in
either of the zed or zed-vicmd keymaps after `zed -b'
has been run. When the widget is called, it prompts
for a new name for the file being edited. When zed
exits the file will be written under that name and the
original file will be left alone. The widget has no
effect with `zed -f'.
While zed-set-file-name is running, zed uses the keymap
zed-normal-keymap, which is linked from the main keymap
in effect at the time zed initialised its bindings.
(This is to make the return key operate normally.) The
result is that if the main keymap has been changed, the
widget won't notice. This is not a concern for most
users.
zcp [ -finqQvwW ] srcpat dest
zln [ -finqQsvwW ] srcpat dest
Same as zmv -C and zmv -L, respectively. These func-
tions do not appear in the zsh distribution, but can be
zsh 5.0.5 Last change: January 5, 2014 73
User Commands ZSHCONTRIB(1)
created by linking zmv to the names zcp and zln in some
directory in your fpath.
zkbd See `Keyboard Definition' above.
string ] srcpat dest
zmv [ -finqQsvwW ] [ -C | -L | -M | -[pP] program ] [ -o
opt-
Move (usually, rename) files matching the pattern src-
pat to corresponding files having names of the form
given by dest, where srcpat contains parentheses sur-
rounding patterns which will be replaced in turn by $1,
$2, ... in dest. For example,
zmv '(*).lis' '$1.txt'
renames `foo.lis' to `foo.txt', `my.old.stuff.lis' to
`my.old.stuff.txt', and so on.
The pattern is always treated as an EXTENDED_GLOB pat-
tern. Any file whose name is not changed by the sub-
stitution is simply ignored. Any error (a substitution
resulted in an empty string, two substitutions gave the
same result, the destination was an existing regular
file and -f was not given) causes the entire function
to abort without doing anything.
Options:
-f Force overwriting of destination files. Not cur-
rently passed down to the mv/cp/ln command due to
vagaries of implementations (but you can use -o-f
to do that).
-i Interactive: show each line to be executed and ask
the user whether to execute it. `Y' or `y' will
execute it, anything else will skip it. Note that
you just need to type one character.
-n No execution: print what would happen, but don't
do it.
-q Turn bare glob qualifiers off: now assumed by
default, so this has no effect.
-Q Force bare glob qualifiers on. Don't turn this on
unless you are actually using glob qualifiers in a
pattern.
-s Symbolic, passed down to ln; only works with -L.
-v Verbose: print each command as it's being exe-
cuted.
-w Pick out wildcard parts of the pattern, as
described above, and implicitly add parentheses
for referring to them.
-W Just like -w, with the addition of turning wild-
cards in the replacement pattern into sequential
zsh 5.0.5 Last change: January 5, 2014 74
User Commands ZSHCONTRIB(1)
${1} .. ${N} references.
-C
-L
-M Force cp, ln or mv, respectively, regardless of
the name of the function.
-p program
Call program instead of cp, ln or mv. Whatever it
does, it should at least understand the form `pro-
gram -- oldname newname' where oldname and newname
are filenames generated by zmv. program will be
split into words, so might be e.g. the name of an
archive tool plus a copy or rename subcommand.
-P program
As -p program, except that program does not accept
a following -- to indicate the end of options. In
this case filenames must already be in a sane form
for the program in question.
-o optstring
The optstring is split into words and passed down
verbatim to the cp, ln or mv command called to
perform the work. It should probably begin with a
`-'.
Further examples:
zmv -v '(* *)' '${1// /_}'
For any file in the current directory with at least one
space in the name, replace every space by an underscore
and display the commands executed.
For more complete examples and other implementation
details, see the zmv source file, usually located in
one of the directories named in your fpath, or in Func-
tions/Misc/zmv in the zsh distribution.
zrecompile
See `Recompiling Functions' above.
zstyle+ context style value [ + subcontext style value ... ]
This makes defining styles a bit simpler by using a
single `+' as a special token that allows you to append
a context name to the previously used context name.
Like this:
zstyle+ ':foo:bar' style1 value1 \
+ ':baz' style2 value2 \
+ ':frob' style3 value3
This defines `style1' with `value1' for the context
:foo:bar as usual, but it also defines `style2' with
`value2' for the context :foo:bar:baz and `style3' with
zsh 5.0.5 Last change: January 5, 2014 75
User Commands ZSHCONTRIB(1)
`value3' for :foo:bar:frob. Any subcontext may be the
empty string to re-use the first context unchanged.
Styles
insert-tab
The zed function sets this style in context `:comple-
tion:zed:*' to turn off completion when TAB is typed at
the beginning of a line. You may override this by set-
ting your own value for this context and style.
pager
The nslookup function looks up this style in the con-
text `:nslookup' to determine the program used to dis-
play output that does not fit on a single screen.
prompt
rprompt
The nslookup function looks up this style in the con-
text `:nslookup' to set the prompt and the right-side
prompt, respectively. The usual expansions for the PS1
and RPS1 parameters may be used (see EXPANSION OF
PROMPT SEQUENCES in zshmisc(1)).
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | shell/zsh |
+---------------+------------------+
|Stability | Volatile |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from http://down-
loads.source-
forge.net/project/zsh/zsh/5.0.5/zsh-5.0.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.zsh.org/.
zsh 5.0.5 Last change: January 5, 2014 76